CAME FROG User Manual
Hidden Power
FROG is the most functional,
desirable solution for any type of swing gate.
It is the best way to automate a
gate without altering its shape and design.
In the CAME tradition the reduction gear is
FROG
3,5 m
FROG
An automation solution that makes the difference
High efficiency operators
They are sturdy, quiet, but above all electromechanical:
•
care in the choice of materials used, its construction with a permanent fluid grease
lubrication, but above all the fact that it is electromechanical, eliminates the need
for periodic maintenance of the operators.
Watertight (IP67; NEMA 6) for uninterrupted operation even under severe rain.
•
The setting and durability of the foundation case
Set during the gate installation,
•
assuring a correct installation and cost efficiency.
Anti-corrosive and resistant to the elements, made of stainless steel and protected
•
with a special galvanized treatment. For extreme applications in the presence of
corrosive elements, the STAINLESS STEEL (FROG BI) version is also available.
It safely locks, opens and relocks
electromechanical, to ensure smooth precise
and safe movement over time.
the operator is mounted at a later time, thus,
During a power outage, everything is simpler even for the versions
powered with 230V (110V).
CAME offers the possibility of choosing among three new door
release solutions, both ORIGINAL and PATENTED, for the perfect
solution to individual requirements:
a basic solution with a release lever, simple and practical.
•
It is the fastest and most convenient solution;
there are two more sophisticated versions, whose doors
•
unlock only via a special three-sided key or with a personalised
DIN cylinder key.
The key versions also offer an additional feature:
the gate manually locks in the closed position. During long power
outages, the FROG release system allows you to open and securely
close the gate.
Also for condominiums and intensive traffic applications
The 24V D.C. model is designed for continuous duty operation.
Slow down at opening and closing. It can accommodate
inputs from any access control system: radio transmitter,
card reader, telephone entry or safety device loops or photocells.
It can incorporate a battery backup system in case
of power failure.
230V
24V
Technical characteristics
Technical information
Type FROG-A FROG-AV FROG-A24
Protection level IP67 (NEMA 6)
Power supply 230V (110V) A.C.
Motor power supply 230V (110V) A.C. 230V (110V) A.C. 24V D.C.
Capacity 200 W 300 W 180 W
Duty cycle 30% 30% intensive oper.
Max torque 320 N•m 240 N•m 320 N•m
Motor thermal protection 150°C 150°C
Opening time (90°) 18S 9S from 16 to 45S
Operating temperature -20°C min. +70°C max.
Overall dimensions
(
2 3/8"
60
)
(
6 1/4"
160
)
Use limits
door weight
Kg
1000
The standard opening is 110˚; with the A 4370 and FL 180 accessories,
the opening increases up to 140˚ and 180˚ respectively.
67
(
)
2 3/4"
(1 Kg = 2,2 LBS – 1 m = 3,2 ft)
800 Kg
800
600
400
200
0
2,00 2,50 3,50
600 Kg
400 Kg
m
door width
405 (16")
Swing gate system for industrial passage
• Photocell
• Safety
photocell
• Flashing light
• Antenna
• Operator FROG
330 (13")
• Transmission arm
• Junction box• Foundation case
• External
Keypad
•
Control
panel
• Radio
receiver
incorporated
Applications
Applications
Loading...