Camden Door Controls CX-IRB-6, CX-IRB Installation Instructions

Door Activation Devices

CX-IRB

Isolation Relay

INSTALLATION INSTRUCTIONS

1. DESCRIPTION

The CX-IRB is Camden’s Double Pole Double Throw (DPDT) Isolation Relay. It can be used to aid any installer when dealing with
integrations that provide excessive power sources or to isolate environmental issues such as electrical noise or induced voltages
from unwanted sources.

It can accept 12 or 24 VDC to operate. With its small footprint (1.5” x 2.75”) it can be installed into any door operator or existing
electrical enclosure.

2. SPECIFICATIONS

Input Voltage

Current Draw

Contacts

Status

Temperature

Dimensions

12/24 VDC

40 mA @ 12/24 VDC

8 amps @ 30VDC/120VAC

Red LED (activated when on)

- 40°C to 70°C (-40° to 158°F)

0.79" H x 1.5" W x 2.76"L (20mm x 38mm x 70 mm)

3. OPERATION AT A GLANCE

When the CX-IRB’s JP1 jumper is set for the desired VDC voltage (12 or 24 volts) and voltage is applied to V+ for positive and V- for
negative (GND) the DPDT relay will energize.

This DPDT relay will provide two independent poles offering both changes of state to pick from (N.O. & N.C.) to drive up to two
independent functions and offering 4 changes of state.

Opening New Doors to
Innovation, Quality and Support!

Call: 1.877.226.3369 / 905.366.3377
Visit: www.camdencontrols.com

File: CX-IRB_Manual.indd
Rev.: 11/22/19
Part no.: 40-82B233