Camden Door Controls CX-EL0061 User Manual
1 27/32'' (47 mm)
2 1/16'' (52.5 mm)
21/32''(16.2 mm)
11/32'' (8.3 mm)
6 1/32'' (152.6 mm)
5 11/32'' (135.5 mm)
11/32'' (8.8 mm)
2 21/32'' (67 mm)
1/8'' (3 mm)
1 3/8''
(34.4 mm)
1 9/32'' (32.4 mm)
1 15/32'' (37.4 mm)
3/8'' (9.4 mm)
1 3/16''
(29.9 mm)
Electric strike body
Mortise Faceplate
(Included)
Supplement
CX-EL0061
Value Line Electric Strike
Installation Instructions
Description:
Ideal for light duty applications with a cylindrical
lockset with ½” to 5/8” throw (5/8 requires 1/8”
door gap), for use in wood, metal or aluminum
door frames.
• For use with offset and cylindrical locksets
• Continuous duty operation (DC)
• Fully reversible for right or left hand doors
• 5 years limited warranty
Page 1 of 2
Jamb Door Installation
CX-EL0061 Value Line Electric Strike Installation Instructions
Technical Features CX-EL0061
Height
Width
Depth
Suits Latches With Maximum Throw Of
Endurance Cycle Test
Holding Force
Operating Temperature Range
2 5/8” (67 mm)
13/16
”
(20.5 mm)
1 1/2
”
(37.4 mm)
1/2” (13.6 mm)
200,000
520 Lbs. (236 Kg.)
5° to 104°F
(-15° to 40°C)
1 5/16'' (33.4 mm)
1/32'' (16.2 mm)
1/4'' (6.5 mm)
1 27/32'' (47 mm)
5/8'' (16 mm)
2 27/32'' (72 mm)
5 11/32'' (135 mm)
Rated Resistance
AC Current Consumption
Stabilized DC Current Consumption
Max. Latch Preloaded AC
Connect the wires directly to the terminals.
This device is not polarity sensitive.
6 3/32'' (154.6 mm)
AC/DC
Verify the voltage provided matches the electric
strike. Many power supplies operate at higher
levels than the rated capacity of the strike.
Higher voltage levels than listed may damage
the strike and void the warranty.
8-16V
17 ohms
8V
16V
8V
12V
30 Lbs. (14 Kg.)
370 mA
750 mA
470 mA
940 mA
Verify that the
latch works
smoothly when
installing
Questions?
Call us toll-free at 1-877-226-3369
Push Buttons Key Pads Strikes Magnetic Locks Key Switches Relays & Timers Access Control
5502 Timberlea Blvd.,
Mississauga, ON Canada
L4W 2T7
www.camdencontrols.com
Toll Free: 1.877.226.3369
File: CX-EL0061-Manual.indd-Rev1
Revised: April 22, 2014
Part No.: 40-82B153
Page 2 of 2
Loading...