This Package Includes:
1- 4 PIN power connector
4- Wire nuts
5- M5 x 12 mm screws
2- #10 x 1 1/4” wood screws
2- #10-32 x 1/2” screws
2- Mounting brackets
2- Spacers
1- Varistor
1. Description
Camden CX-ED1410 Grade 1 ANSI strike for cylindrical
locksets offer the very best strike quality and performance,
with a stainless steel faceplate provided. The ‘ANSI’ re strike
design delivers unparalleled application exibility, with eld
selectable voltage and fail safe/fail secure operation.
Note: Fire rating applicable only while in fail secure mode.
CX-ED1410
‘ANSI’ Fire Electric Strike
Installation Instructions
BP10200
2. Specifications 3. Dimensions
Voltage
Current Draw
Static Strength
Dynamic Strength
Endurance
Fire Rating
Latch Projection
Mode
Operation
Duty
Dimensions (Body)
12/24V AC/DC
260mA@12V AC/DC
150mA@24V AC/DC
1,500 Lbs.
70 Ft-Lbs.
1,000,000 Cycles (Factory Tested)
250,000 Cycles (UL Verified)
90 minutes (UL verified)
5/8” - 3/4” (16mm - 19mm)
Field Selectable
Fail Safe/Fail Secure
AC-Buzz
DC-Silent
Continuous
3 3/8” H x 1 7/8” W x 1 3/8” D
(86mm x 47mm x 35mm)
1 1/4”
4 7/8”
(124mm)
(32mm)
(16mm)
5/8”
4 1/8”
(105mm)
(35mm)1 3/8”
3 3/8”
(86mm)
(47mm)1 7/8”
1 5/8”
(42mm)
(19mm)
(19mm)
1/2”
3/4”
3/4”
(35mm)1 3/8”
(12mm)
(35mm)1 3/8”
(32mm)1 1/4”
Page 1 of 3
(3mm)1/8”
4. Installation
CX-ED1410 ‘Universal’ Fire Electric Strike
1. Prepare the door jamb as per the appropriate drawing.
2. Install mounting brackets to jamb using M5x12 screws
and pressed metal nuts. Do not tighten.
3. Spacers are used to assure ush nal assembly of
faceplate into jamb. Add one or more spacers between
jamb and mounting bracket when face plate extends
beyond the jamb. When the faceplate sits inside the
jamb, spacers must be added between the mounting
Mounting Bracket (2pcs)
Drill & Countersink For
M5 Flat-Head Screw (2pcs)
Pressed Metal Nut
M5x12
Flat-Head
Screw (4pcs)
86
35
48
37
126
155
bracket & the lip bracket. Make sure the clearance hole in
the spacer aligns with the hole in mounting bracket.
4. Connect wires coming from the low voltage side of the
transformer to wires (black) from strike.
5. Install electric strike jamb by attaching with # 10-32
screws and lockwashers.
6. Securely tighten the M5x12 screws holding the mounting
brackets to jamb.
Centerline
Jamb
Vertical Centerline
Note: The products are intended to be installed in
accordance with the installation wiring diagram, mechanical
assembly drawings provided with each product, the local
authority having jurisdiction (AHJ) and the National Electric
Code, NFPA 70. When installed in fail secure mode, the
local authority shall be consulted with regard to the use of
possible panic hardware to allow emergency exit from the
secure area.
The electric door strike shall be installed in such a way
and in such location so as to not impair the operation of
an emergency exit device or panic hardware mounted on
the door.
Horizontal
Centerline
Jamb
35
86
Vertical Centerline
48
37
126
105
M5x12
Flat-Head
Screw (2pcs)
Page 2 of 3
CX-ED1410 ‘Universal’ Fire Electric Strike
5. Connections 6. Operation
POWER
12V AC/DC
Red/Black: +12V
Blue/Green: Ground
24V AC/DC
Red: +24V
Black/Blue: Green: Ground
A varistor is provided to protect/prevent strike from spikes.
Connect varistor between input wires.
Note: The door strikes are to be powered via a class 2 power
limit output from a control panel or power supply that is UL
listed to UL Burglar Alarm/Access control standards.
How to modify fail-safe to fail-secure or vice versa.
(1). Loosen the screw as per the product diagram below.
(2). Rotate the set plate 180° and slide the plate until it is
properly seated.
(3). Tighten the screw.
(+12V)
Varistor
(-)
(+24V)
Varistor
(-)
12V
24V
Black
Red
Blue
Green
Fail Safe Mode Fail Secure Mode
Red
Black
Blue
Green
Red
Black
Blue
Green
Push Buttons Keypads Strikes Magnetic Locks Key Switches Relays & Timers Access Control
5502 Timberlea Blvd.,
Mississauga, ON Canada
L4W 2T7
www.camdencontrols.com
Toll Free: 1.877.226.3369
Page 3 of 3
File: CX-ED1410 Designer
Installation Instructions.indd R1
Revision: 08/04/2017
Part No.: 40-82B206
Loading...