Camden Door Controls CM-AF142SO Installation Instructions

Door Activation Devices

CM-AF142SO

Single Gang Multi-color Dome Light, with Sounder

INSTALLATION INSTRUCTIONS

THIS PACKAGE INCLUDES

(1) Foam Gasket

(1) O Ring

(1) Set of Labels

(1) LED Base

(1) Lens

(1) 2-28 x 5/16"
Phillips locking screw

(2) Concrete wall plugs

1. DESCRIPTION

Camden CM-AF142SO Multi-color Dome Light, provides both
visual and audible annunciation. It mounts to a standard
single gang electrical box. The Superbright LED’s along with
the wedged shaped lamp cover provides visible illumination
from either end of a corridor. The integrated piezo buzzer with
adjustable volume provides up to 93 dB at 1 metre (3 feet).

2. SPECIFICATIONS

Voltage

Illumination

Sounder

Current Rating

Dimensions (Body)

12/24V AC/DC

Superbright LED's

Piezo, 93 dB max. @ 1 metre (3 ft.)

70 mA Max for one color wire.
Combining more than one color
wire = 130 mA.

4 9/16" H x 2 15/16" W
(115mm x 75mm)

(2) #6 x 3/4" self-tapping screws

(2) 6-32 x 3/4" screws

(4) Wire nuts

(2) 3/16" drywall plugs

4. WIRING

Camden CM-AF142SO Multi-color Dome Light is easily wired
using the two of the four color coded wires supplied; Black
(BLK), Red (RED), Green (GRN) and Blue (BLU). Using the BLK
wire as common, selecting one of the three color wires to
complete the circuit will determine the color of the Dome light.
The black wire lead and any one of the color coded wires can be
connected to either an AC or DC power source supplying 12
or 24 volts.

- Use black wire

-

+

for common

- Select red wire
for red color

- Select green wire
for green color

- Select blue wire
for blue color

3. SOUND VOLUME ADJUST

Using a small Phillips screwdriver, gently turn the volume
adjustment counter clock wise to reduce the volume and

clockwise to increase the volume.

12-24
AC/DC
Power

Page 1 of 2

5. INSTALLATION

O Ring

Lens

Locking Screws

A
S
S

I
S
T
A
N
C
E

R
E
Q
U

I
R
E
D

Labels

Labels

CM-AF142SO mounts to a standard single gang electrical box.

CM-AF142SO Single Gang LED Dome Light with Sounder

INSTALLATION INSTRUCTIONS

CM-AF142SO

Base

Gasket

FLASH RATE:
Increase or decrease
the flash rate by gently
turning the potentiometer
with a small screwdriver.

Step 1

Place the gasket (supplied)
between the base unit and
the electrical box. Use the
6-32 screws to fasten the
base to the electrical box.

Step 3

Install the lens
by inserting the
large bottom tab

rst. The top tabs

will snap in place
with little effort.

Step 4

Install the
Phillips locking
screw into the
bottom of
the base.

Step 2

Insert the O ring gasket into
the small channel in front of
the base. The O Ring does
not completely close around
the base. You must leave a
small opening at the bottom
of the base.

Step 5

Apply the
labels as
required
to the lens.

(115mm)

4-9/16”

2-15/16” (75mm)

Opening New Doors to
Innovation, Quality and Support!

1-9/16”

(40mm)

3-1/16”

(77mm)

2-1/16” (53mm)

Call: 1.877.226.3369 / 905.366.3377
Visit: www.camdencontrols.com

3-1/4”

(83mm)

File: CM-AF142SO-Manual-R2.indd
Revision: 04/07/2019
Part No.: 40-82B228

Page 2 of 2