Camden Door Controls CM-9700C, CM-9700U, CM-9710C, CM-9710U Specsheet

DOOR ACTIVATION
DEVICES

PUSH/EXIT SWITCHES

ROHS

COMPLIANT

CM-9700

CM-9710

2 ¾”

(70mm)

CM-9700 AND CM-9710 SERIES

PIEZO PUSH SWITCHES

FEATURES

FEATURES

• SINGLE GANG & NARROW FACEPLATES

• NO MOVING PARTS

• SOLID STATE OUTPUT, N/O, 200MA.
@ 40V DC (EXTERNAL RELAY TYPICALLY
REQUIRED FOR CONNECTION TO
ELECTRIC LOCKING DEVICES).

• NO POWER REQUIRED TO OPERATE

DESCRIPTION

Camden Door Controls, CM-9700 and CM-9710 Series surface mount piezo push
switches are virtually impervious to weather and vandalism due to their unique
one-piece aluminum construction and non-moving part design. The switches do
not require power to operate.

CM-9700 is a single gang (2 3/4”) width, CM-9710 is only (1 3/8”) wide, perfect for
door frames or narrow areas. There is an option for English/French and English/
Spanish labels.

Output closure is non-adjustable, 1/4 second duration.

• ONE PIECE ALUMINUM CONSTRUCTION

• VIRTUALLY IMPERVIOUS TO VANDALISM

• 3 LABELS INCLUDED, ’U’ MODELS WITH
ENGLISH & SPANISH LABELS, ’C’ MODELS
WITH ENGLISH & FRENCH LABELS

• LIFETIME WARRANTY

1 3⁄8”

(35mm)

CM-9700

4 ½”

(114mm)

CM-9710

4 ½”

(114mm)

½”

(13mm)

APPLICATION

CM-9700 and CM-9710 Series switches may be connected directly to ‘low load‘
devices such as automatic door operators, power supply switch inputs or access
control system. Not recommended for direct connection to 'high load' devices such
as electric strikes and magnetic locks. For these applications, an external relay or
timer is required.

ARCHITECTS /ENGINEERS SPECIFIC ATIONS

Piezo push switch controls to be used throughout the site, or complex will be
supplied exclusively by Camden Door Controls. The CM-9700 and CM-9710 Series
piezo push switches shall be used for all surface mounting applications.

The switches shall provide a solid state (N/O) output and be fully weatherproof and
vandal resistant with one-piece aluminum construction and no moving parts. The
switch assembly is to be integral to the housing. Each switch is to be mounted
using the supplied tamper-proof or stainless steel Phillips screws.

ACCESSORIES KEYPADS SPECIAL PURPOSE SWITCHES HANDS-FREE SWITCHES RF CONTROLS MOUNTING OPTIONS PUSH BUTTONS KEY SWITCHES

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)
Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

PIEZO PUSH SWITCHES

SPECIFICATIONS

MECHANICAL

OPERATING TEMP: - 40F TO +180F

- 40C TO + 82C

WEATHERPROOF
RATING: IP68

DIMENSIONS: SINGLE GANG: 4 1/2”H x 2 3/4”W x 7/8”D

(114mm x 70mm x 22mm)

NARROW JAMB: 4 1/2”H x 1 3/8”W x 7/8”D
(114 mm x 35 mm x 22 mm)

ELECTRICAL

VOLTAGE RATING: 0 - 40V DC

CURRENT RATING: 200 MA TYPICAL

400 MA MAXIMUM

CONTACT CLOSURE: 1/4 SECOND

RESISTANCE: ’ON’: LESS THAN 50 OHMS
’OFF’: GREATER THAN 5 MEG OHMS

SWITCH LIFE: GREATER THAN 20 MILLION OPERATIONS

ORDERING INFORMATION

To ”High Load” Locking Device

Connect one wire from your power supply
to the switch. The other wire connects to
one side of the relay coil then to the switch.

STRIKE

OR

MAG LOCK

POWER

SUPPLY

RELAY

½”

(13mm)

SIDE VIEW

1 3⁄8”

(35mm)

MODEL MODEL DESCRIPTION

SINGLE JAMB WIDTH
GANG (NARROW)

CM-9700U CM-9710U SWITCH WITH 3 ENGLISH AND SPANISH LABELS
(‘PUSH TO EXIT’, ‘EMPUJE PARA ABRIR‘,
WHEELCHAIR SYMBOL)

CM-9700C CM-9710C SWITCH WITH 3 ENGLISH AND FRENCH LABELS
(‘PUSH TO EXIT’, ‘POUSSEZ POUR SORTIR‘,
WHEELCHAIR SYMBOL)

FOR FINISHES, ADD:

‘BZ’ DARK BRONZE FINISH (BHMA 710, 313AN)

To ”Low Load” Device or System

Auto door controller,
access control, or other
”low load” device

SIDE VIEW

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)

Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

LIT-SP-97&9710R3