Camden Door Controls CM-9280-3, CM-9280-3F, CM-9280-3S, CM-9280-7, CM-9280-7F User Manual
...
CM-9200-9300-9700 SERIES
PIEZO SWITCHES
Installation Instructions
www.camdencontrols.com
Toll Free: 1.877.226.3369
File: CM-9200-9300 9700_Manual_July11
5502 Timberlea Blvd.,
Mississauga, ON Canada L4W 2T7
Package Contents
- (1) Piezo Switch assembly
- (1) Rubber gasket
- (2) #6-32 x 3/4” Phillips screws
Section 1 __________________
General Description
Camden Heavy-D u ty CM-9200 & 9300 series consist of
stainless steel face plate construction with a separate all
aluminum non-moving Piezo actuator.
Camden Heavy-D u ty CM-9700 series is a one piece all
aluminum construction with a non-m oving Pie zo
actuator. These series of switches are impervious to
most types of vandal att ac k.
The switches do not require power to operate and can
be operated while wearing gloves. The switch is a N/O
operation with a typical ¼ second closure duration.
Section 2__________________
Installation
Mounting
1. The switch is integral to the housing. Only the wiring
need be done (see next section).
2. Once the electrical connections are completed,
attach the unit to the switch wall, using the supplied
tamper-proof, or stainless steel Phillips screws.
For outdoor use, place the rubber weatherproofing
gasket behind the faceplate prior to securing to the
back box or wall.
MECHANICAL
OPERATING TEMP: - 40F to +180F (- 40C TO + 82C)
WEATHERPROOF RATING: IP68
ELECTRICAL
VOLTAGE RATING: 0 - 40V DC
CURRENT RATING: 200 MA typical
400 MA maximum
CONTACT CLOSURE: 1/4 second
RESISTANCE: 'ON' Less than 50 OHMS
'OFF' Greater than 5 MEG OHMS
SWITCH LIFE: More than 20 million operations
Wiring to ‘Low Load’ Devices
Switch can be directly connected to automatic door
operators or access control systems.
Wiring to ‘High Load’ Devices
Switch not intended to be connected to devices
such as electric strikes or magnetic locks. A relay is
required. See below.
Section 3__________________
Specifications
Published: July 5, 2011
Part No.:
40-82B070
Loading...