Camden Door Controls CM-8000-2, CM-8000-3, CM-8000-3F, CM-8000-3S, CM-8000-4 Specsheet

DOOR ACTIVATION
DEVICES

PUSH/EXIT SWITCHES

Listed
Components

CM-8000

2 ¾”

(70mm)

CM-8000

1 ¾”

(44mm)

Compliant

4 ½”

(114mm)

CM-8000/8100 SERIES

EXIT SWITCHES (EXTENDED BUTTON)

FEATURES

• LOW PROFILE DESIGN

FEATURES

• PROTRUDES LESS THAN 1” FROM WALL

• BUTTON EXTENDS 1/4” FROM
PROTECTIVE METAL HOUSING

• EASY TO ACTIVATE

• GOOD PROTECTION AGAINST
DAMAGE AND ABUSE

• 1” DIAMETER, RED OR GREEN BUTTONS

• MOUNTED ON HEAVY 1/4” THICK
ALUMINUM PLATE

• SINGLE GANG & 1 3/4” WIDTH
PLATES AVAILABLE

• INDOOR OR OUTDOOR APPLICATIONS

• DOOR FRAME, WALL & PEDESTAL
MOUNTING

DESCRIPTION

Camden Door Controls 8000/8100 Series low profile exit switches are vandal resistant; designed
and manufactured to meet the stringent demands of exit controls. They are supplied with
a 1/4” thick heavy duty brushed aluminum plate, in 1 3/4” or 2 3/4” widths. Optional duranodic
(US 40) finish is also available.

CM-8000 Series Extended Buttons are inobtrusive, yet easy to activate. The button extends from
the metal housing, to provide visibility and to allow for quick and easy activation. The low profile
design protrudes less than 1” from the wall.

The switches are UL/CSA approved, rated at 10 amps. The design of the Camden Exit Button is
modular, so contacts can be stacked to control up to six distinct functions simultaneously.
Optional 1-60 second pneumatic timer can be added instead of contact blocks. Timer features
6 amp DPST (N/O and N/C) contacts. Camden Switches provide an economical, practical, attractive
method to control electrical devices.

• SPRING RETURN OPERATION

• VANDAL AND TAMPER RESISTANT

• TAMPERPROOF SCREWS PROVIDED

• STACKABLE CONTACTS CAN
CONTROL 6 DISTINCT FUNCTIONS

• PNEUMATIC 1-60 SECOND TIMER OPTION

• UL/CSA APPROVED SWITCHES RATED
6 AMPS @ 30V DC

• COLOR CODED 18 AWG SPADE
CONNECTIONS

• BRUSHED ALUMINUM FINISH

• CUSTOM ENGRAVING AND FINISHES
AVAILABLE

• FAST & EASY TO INSTALL

CM-8100

4 ½”

(114mm)

APPLICATION

Camden Exit Switches are ideal for high traffic areas, such as store and building front entrances,
and exits. They can be surface, flush, or mullion (narrow) mounted. Easily visible, they are available
with single gang (2 3/4”), or narrow (1 3/4”) mounting plates.

Camden Exit Switches are designed to control overhead doors, electric locks, electro-magnetic locks,
electric strikes, automatic doors, and handicap operators. They may also be used for motor control,
shunting, by passing alarms, request to exit, timed functions, and many other applications. The
switches are made for high frequency usage, in an indoor or outdoor environment. Camden Exit
Switches are versatile, and are supplied in various configurations to suit commercial, industrial and
residential applications.

ACCESSORIES KEYPADS SPECIAL PURPOSE SWITCHES HANDS-FREE SWITCHES RF CONTROLS MOUNTING OPTIONS PUSH BUTTONS KEY SWITCHES

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)
Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

(29mm)

1

EXIT SWITCHES

ARCHITECTS /ENGINEERS SPECIFICATIONS

The Exit switch(es) to be used throughout the site or complex shall be Camden Door Controls,
CM-8000/8100 series Exit switches. The assembly shall be tamper and vandal resistant. The
faceplate shall be made of 1/4” thick aluminum, and supplied with stainless steel Torx or snake
eye-security screws. All buttons must be encased in a protective metal housing. All symbols,
letters, and/or markings shall be permanently engraved into the button.

The CM-8000 series shall be used in applications requiring an inobtrusive, easy to activate exit
switch. The button shall extend 1/4” from the protective metal housing, and protrude no more
than 1” from the wall. Rating for all electrical contacts shall be a minimum of 6 amps @ 30 VDC.
The switch used shall be a UL/CSA approved type, supplied with color coded spade leads.

The switch assembly shall be modular, allowing for up to six distinctive functions upon activation
of the push button.

ORDERING INFORMATION

Model CM-8000/8100 Series Extended Exit Switches come with a 1” (25mm) button (red or green),
brushed aluminum faceplate, modular contact block, 2 socket/slotted screws, and 2 tamperproof
screwsews.

MODEL DESCRIPTION

SINGLE GANG FACEPLATE - 2 3/4” (70MM)

CM-8000 SPRING RETURN N/O, SPST MOMENTARY

CM-8010 SPRING RETURN N/C , SPST MOMENTARY

CM-8020 SPRING RETURN N/O & N/C, DPST MOMENTARY

CM-8085 SPRING RETURN DPST PNEUMATIC TIMER 1-60 SECONDS

½”

(13mm)

⁄”

¼”

(6mm)

2 ¾”

(70mm)

1 ¾”

(44mm)

CM-8000

CM-8000

3 ¼”

(82mm)

4 ½”

(114mm)

NARROW STILE FACEPLATE - 1 3/4” (44MM)

CM-8100 SPRING RETURN, N/O, SPST MOMENTARY

CM-8110 SPRING RETURN, N/C, SPST MOMENTARY

CM-8120 SPRING RETURN, N/O & N/C, DPST MOMENTARY

CM-8185 SPRING RETURN DPST PNEUMATIC TIMER 1-60 SECONDS

FOR BUTTON GRAPHICS, ADD:

(ALL TEXT ENGRAVED IN WHITE)

‘E’ FOR ‘EXIT‘
‘S’ FOR ‘SORTIE‘
‘SA’ FOR ‘SALIDA‘

FOR FACEPLATE GRAPHICS, ADD:

(ADD SUFFIX TO ANY ‘BLANK’ MODEL)

/3 ‘PUSH TO OPEN’
/3F ‘POUSSEZ POUR OUVRIR’
/3S ‘EMPUJE PARA ABRIR’
/4 WHEELCHAIR ICON + ‘PUSH TO OPEN’
/7 ‘PUSH TO EXIT’
/7F ‘POUSSEZ POUR SORTIR’
/8 ‘PUSH TO LOCK’

FOR COLOR, ADD:

‘R’ FOR RED BUTTON
‘G’ FOR GREEN BUTTON
‘B’ FOR BLUE BUTTON

ADDITIONAL CONTACT:

CM-XXX-4000/60 ADDITIONAL N/O CIRCUIT

CM-XXX-4000/61 ADDITIONAL N/C CIRCUIT

FACEPLATE FINISHES:

‘BZ’ DARK BRONZE FINISH (BHMA 710, 313AN)

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)

Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

LIT-SP-8/8100-R1