Camden Door Controls CM-7509-A4, CM-7536-A4 Specsheet
DOOR ACTIVATION
DEVICES
PUSH PLATE SWITCHES
Column™ 9” & 36”
Push Plate Switches
Listed
Components
BUILT CAMDEN
TOUGH
Compliant
Camden CM-75 Series Column™
switches offer greater user
convenience and lower installation
costs by providing a single
activation device in place of two
high/low switches, as required by a
growing number of building codes
across North America.
CM-75 Series Column™ switches feature
solid aluminum or stainless steel
construction and are available in a range of
finishes, with the option for Kinetic™
no-battery wireless or Lazerpoint RF™
battery powered wireless transmitters.
Features
• Easily operated at any angle by hand, foot or body.
• Exceeds state and provincial building code
requirements.
• Available in 9” and 36” sizes with clear, bronze or blue
anodized finishes and stainless steel (36” only).
• Color matched with Camden aluminum, bronze
and stainless steel switch mounting posts (bollards),
in 42” and 48” tall sizes.
• (2) fully redundant SPDT switches, rated 15 Amps.
• Option for Kinetic™ no battery wireless transmitter*
or Lazerpoint RF™ transmitter and battery pack.
• Adjustable leveling screws for easy installation
on uneven walls.
Column™ 9” & 36” Tall Push Plate Switches Product Specification Sheets
SPECIFICATIONS
VOLTAGE: 12V or 24V AC/DC
CONTACT TYPE: CM-7509: (1) SPDT Momentary, Form ‘C’
CM-7536: (2) SPDT Momentary, Form ‘C’
CONTACT RATING: 15 Amps @ 30V DC
DIMENSIONS: CM-7509: 5 7/8”W x 10 5/8”H x 1 1/2”D (150mm x 270mm x 38mm)
CM-7536: 5 7/8”W x 37 1/2”H x 1 1/2”D (150mm x 953mm x 38mm)
MODELS
CM-7509
CM-7536
CM-7536SS 36" Tall Column™ Push Plate Switch, Brushed Stainless Steel, US32 / 630
9” Tall Column™ Push Plate Switch, Anodized Aluminum, option for Bronze
or Blue finish
36” Tall Column™ Push Plate Switch, Anodized Aluminum, option for Bronze
or Blue finish
9” & 36” PUSH PLATE SWITCHES
OPTIONAL ARCHITECTURAL FINISHES
-BRZ Add Suffix ‘-BRZ‘ to Model # for Anodized Dark Bronze finish (BHMA 710, 313AN)
-BLU Add Suffix ‘-BLU‘ to Model # for Anodized Blue finish
OPTIONAL WIRELESS
K
-TX
CM-RX90V2 Kinetic™ and Lazerpoint RF™ compatible receiver
Add Suffix ‘K’ to Model # for (2) built-in Kinetic™ no-battery wireless
transmitter switches.
Add Suffix ‘-TX’ to Model # for (1) CM-TX-9 Lazerpoint RF™ wireless transmitter
and alkaline battery pack, mounted in switch cap
WATERPROOFING OPTION
-WT Add ‘-WT‘ to Product # for Boot & Water Tight Coating
Optional DPDT Switch. DPDT switches not available. Use Camden CX-IRB relay if required.
DIMENSIONS
Kinetic™ wireless option requires 2 wall cut-outs
( 1 1/8”W x 1 7/8”H x 1 3/4”D )
5 7/8” (150mm)
1 1/2” (38mm)
CM-7509 CM-7536 CM-7536SS
GRAPHIC OPTIONS
CM-xx/2 CM-xx/4
CM-xx/2AL CM-xx/2AR
Note: /2AL and /2AR not available on stainless steel model
5 7/8” (150mm)
7 3/4”(196mm)
PUSH
TO
OPEN
36”
(914mm)
20 1/2”
(520mm)
CM-xx/A2
CM-xx/A4
1 1/2” (38mm)
37 1/2”
(953mm)
PUSH
OPEN
9”
TO
(228mm)
CM-7509 CM-7536
10 5/8”
(270mm)
Opening New Doors to
Innovation, Quality and Support!
5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)
Tel: (905) 366-3377 • Fax: (905) 366-3378 • E-mail: info@camdencontrols.com • www.camdencontrols.com
Part #: MKTG-LIT-SP-CM-75Series R2
Loading...