Camden Door Controls CM-7509-2, CM-7509-4, CM-7509, CM-7536-1, CM-7536-2 Specsheet

DOOR ACTIVATION
DEVICES

PUSH/EXIT SWITCHES

Listed
Components

CM-7509/4

Compliant

CM-75

36” & 9” PUSH PLATE SWITCHES

FEATURES

• HEAVY DUTY CONSTRUCTION, ADA
COMPLIANT

• LOW PROFILE CONTOURED DESIGN WITH
EASY ACTIVATION FROM SIDE ANGLES

• EXCEEDS CALIFORNIA BUILDING CODE,
SECTION 1117B.6 REQUIREMENTS

• OVER 94 SQUARE INCHES TOTAL
ACTIVATION AREA (CM-7536)

• (2) FULLY REDUNDANT SPDT,15 AMP.,
UL LISTED SWITCHES (CM-7536)

DESCRIPTION

Camden Door Controls CM-75 Series Column™ push plate switches offer the latest
word in rugged and attractive ADA compliant switch design that are easy to install
(wired or wireless), easy to activate (from any angle) and provide years of trouble
free operation. CM-75 are the only models in the industry that provide (2) fully
redundant, heavy duty, 15 Amp switches. The switch components are UL Listed.

With a profile of less than 1.5” (38mm), Column™ push plate switches offer an elegant
design that is both attractive and offers easier activation. Models are available in
anodized aluminum finish (epoxy printed blue graphics), dark bronze anodized finish
(epoxy printed white graphics), and anodized blue (epoxy printed white graphics).

The innovative end caps are made of impact and flame resistant polycarbonate,
designed for easy ‘snap-in’ installation and service of Lazerpoint RF™ wireless
transmitters and batteries.

• CHOICE OF CLEAR ALUMINUM, DARK
BRONZE AND ANODIZED BLUE
ARCHITECTURAL FINISHES

• CHOICE OF 4 DIFFERENT STOCK GRAPHICS

• OPTIONAL ‘SNAP-IN’ LAZERPOINT RF™
WIRELESS TRANSMITTERS

• ADJUSTABLE LEVELING SCREWS FOR
EASY INSTALLATION ON UNEVEN WALLS

• NO INTERNAL WIRES EXPOSED TO
MOVING PARTS

CM-7536/4CM-7536/4/BLU CM-7536/4BRZ

APPLICATION

Camden Door Controls, Column™ series push plate switches are ADA compliant and
exceed the requirements of the California Building Code, Section 1117B.6., where
activation switches for automatic doors are located not more than 48 inches (1219
mm) nor less than 15 inches (381 mm) to the level of a finish floor or working
platform. CM-75 Column™ switches are designed to eliminate the need to install
two activation switches to meet this code requirement.

CM-75 Column™ switches are easily mounted on exterior or interior surfaces and
offer 4 leveling screws to accommodate uneven walls, such as brick or concrete.
For installations that require an exterior freestanding switch, CM-75 series switches
are compatible with color matched Camden CM-42 and CM-48 Series anodized
aluminum and dark bronze bollards.

The (2) fully redundant SPDT momentary switches rated 15 Amps, are hardwired to
the automatic door controller, or to a field installed Lazerpoint RF™ CM-TX-9
transmitter. Lazerpoint RF™ transmitters offer superior range, stuck switch alarm,
battery test gauge and up to 500,000 activations utilizing standard AAA alkaline
batteries.

ACCESSORIES KEYPADS SPECIAL PURPOSE SWITCHES HANDS-FREE SWITCHES RF CONTROLS MOUNTING OPTIONS PUSH BUTTONS KEY SWITCHES

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)
Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

36” & 9” PUSH PLATE SWITCHES

SPECIFICATIONS

DIMENSIONS: CM-7536: 37 1/2”H x 5 7/8”W x 1 1/2”D OVERALL
(953mm x 150mm x 38mm )

CM-7509: 10 5/8”H x 5 7/8”W x 1 1/2”D OVERALL
(270mm x 150mm x 38mm )

CONSTRUCTION: HEAVY DUTY EXTRUDED ALUMINUM

FINISH: CM-75: ANODIZED CLEAR ALUMINUM

CM-75/BRZ: ANODIZED DARK BRONZE
CM-75/BLU: ANODIZED BLUE

OPERATING VOLTAGE: 12 OR 24V AC/DC

CONTACT TYPE: CM-7536: (2) SPDT MOMENTARY, FORM ‘C’

CM-7509: (1) SPDT MOMENTARY, FORM ‘C’

CONTACT RATING: 15 AMPS @ 30V

COMPLIANCE: UL LISTED SWITCH COMPONENTS, ADA COMPLIANT,

MEETS CALIFORNIA STATE BUILDING CODE, 1117B.6

OPTIONAL WIRELESS: ‘SNAP-IN’ LAZERPOINT RF™ WIRELESS TRANSMITTER
(SEE SEPARATE SPEC SHEET FOR DETAILS)

ORDERING INFORMATION

MODELS DESCRIPTION

CM-7536 36” LONG, COLUMN™ PUSH PLATE SWITCH

CM-7509 9” LONG, COLUMN™ PUSH PLATE SWITCH

9”

5 ⁄”

(150mm)

2 ⁄”

(66mm)

PUSH

TO

OPEN

CM-7509/4

5 ⁄”

(150mm)

2 ⁄”

(66mm)

PUSH

TO

OPEN

10 ⁄”

(270mm)(229mm)

1 ½”

(38mm)

OPTIONS

(Add suffix to model above)

FACEPLATE GRAPHIC OPTIONS

CM-XX/1 CM-XX/2 CM-XX/3CM-XX/A2

CM-xxx/1: For CM-7536 only, not available with ‘BRZ‘ and ‘BLU‘ architectural finishes

CM-xxx/3: For ‘PUSH TO OPEN‘, CM-7536 only, not available with ‘BRZ‘ and ‘BLU‘

architectural finishes

CM-XX/A4CM-XX/4

ARCHITECTURAL FINISHES:

CM-BRZ ADD ‘BRZ‘ TO MODEL # FOR DARK BRONZE FINISH, CM-7536 ONLY

CM-BLU ADD ‘BLU‘ TO MODEL # FOR ANODIZED BLUE FINISH, CM-7536 ONLY

OPTIONAL WIRELESS TRANSMITTER

CM-TX9 LAZERPOINT RF™ 915MHZ. TRANSMITTER WITH BATTERIES

COMPATIBLE 48” AND 42” TALL BOLLARDS (MOUNTING POSTS)

CM-48-DSU-CLR 48” EXTRUDED ALUMINUM BOLLARD, CLEAR ALUMINUM FINISH

CM-48-DSU-BRZ 48” EXTRUDED ALUMINUM BOLLARD, DARK BRONZE FINISH

CM-42-DSU-CLR 42” EXTRUDED ALUMINUM BOLLARD, CLEAR ALUMINUM FINISH

CM-42-DSU-BRZ 42” EXTRUDED ALUMINUM BOLLARD, DARK BRONZE FINISH

36”

(914mm)

CM-7536/4

37 ½”

(953mm)

FINISHES SPECIFICATION:

‘BRZ’ DARK BRONZE (BHMA 710,
313AN) FINISH

‘CLR’ CLEAR ALUMINUM
(BHMA 628, US28) FINISH

Contact factory for custom CM-75
switch orders including different
lengths, finishes, graphics and LED
indicators.

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)

Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

MKTG-LIT-SP-COL75R4