Camden Door Controls CM-45-1, CM-45-2, CM-45-2AL, CM-45-2AR, CM-45-3 Specsheet
...
DOOR ACTIVATION
DEVICES
PUSH/EXIT SWITCHES
Listed
Components
(CONCEALED MOUNTING SCREWS)
(EXPOSED MOUNTING SCREWS)
(EXPOSED MOUNTING SCREWS)
CM-45/2
CM-46/4
CM-46CB/4
Compliant
CM-45/46
4 1/2” SQUARE ALL - ACTIVE SWITCHES
FEATURES
FEATURES
• LARGE, EASY TO OPERATE SWITCHES
• ALL-ACTIVE DESIGN REQUIRES MINIMAL
ACTUATION FORCE
• MEETS ADA REQUIREMENTS
• CM-45 AND CM-46 OFFER STAINLESS
STEEL CONSTRUCTION. CM-46CB
ALUMINUM FACEPLATE
DESCRIPTION
Camden Door Controls CM-45/46 Series all-active switches are heavy-duty, ADA-compliant
door controls. The 4 1/2” square faceplates are stainless steel or aluminum, and the
assemblies are designed for easy installation.
Both series mount to standard single gang or double gang electrical boxes. CM-45 series
is sold as a complete assembly, which is mounted to the in-wall box (or surface box) using
stainless steel Allen screws and a hex key (included with the switch). Access to the
mounting screws is through small holes in the front of the faceplate. This provides for
tamper resistance, while maintaining an attractive overall appearance.
CM-46 series is sold as a two part assembly. The rear assembly is mounted to the in-wall
box (or surface box). The front faceplate is then screwed to the rear assembly using
either standard or security screws (included with kit).
The SPDT (and optional DPDT) switches are UL/CSA approved, and rated 15 amps @ 30
VDC. The push switches are offered with different graphics, and in various architectural
finishes. Weather resistant, and water tight configurations are also available.
• FLUSH MOUNT OR SURFACE MOUNT
• UL/CSA APPROVED SWITCH,
RATED 15 AMPS @ 30V DC
• AVAILABLE WITH ‘ACTIVE‘ WHEELCHAIR
SYMBOL GRAPHICS
• OPTIONAL ARCHITECTURAL FINISHES
¾”
(19mm)
½”
(13mm)
APPLICATION
Camden all-active switches are designed for areas where an easy-to-activate, high
visibility switch is desired. Ideal for high-traffic areas, hospitals, wheelchair access,
seniors’ residences, etc. They can be surface or flush mounted.
Camden all-active switches are designed to control electric strikes, electromagnetic
locks and automatic doors. They may also be used for shunting, bypassing alarms,
request to exit, timed functions, and many other applications.
The switches are made for high frequency usage, in both indoor and outdoor
environments. Camden switches are versatile, and can be supplied in various
configurations and finishes, to suit any commercial, industrial, or residential application.
CM-45/46
ACCESSORIES KEYPADS SPECIAL PURPOSE SWITCHES HANDS-FREE SWITCHES RF CONTROLS MOUNTING OPTIONS PUSH BUTTONS KEY SWITCHES
5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)
Tel: (905) 366-3377 • Fax: (905) 366-3378 • E-mail: info@camdencontrols.com • www.camdencontrols.com
4 1/2” SQUARE ALL - ACTIVE SWITCHES
ARCHITECTS /ENGINEERS SPECIFICATIONS
The switches to be used throughout the complex shall be Camden Door Controls
CM-45, CM-46 or CM-46CB series all-active switches.
The switches shall be easy-to-activate, ADA compliant, 4 1/2” square. Switches shall
be all-active, whereby pressing any part of the faceplate will activate the device.
Faceplates shall be constructed of stainless steel or aluminum. Switches shall use
plastic spacers and rubber dampers for noise reduction. Switches shall be rated at
a minimum of 15 amps @ 30V DC.
ORDERING INFORMATION
All CM-45/46 series all-active switches are complete ready-to-install assemblies.
CM-45 series are supplied with stainless steel Allen screws and an Allen wrench
for mounting. CM-46 series are supplied with stainless steel tamperproof screws.
4 ½”
3 ¾”
(95mm)
(51mm)
(114mm)
2”
3”
(76mm)
3 ¼”
(83mm)
4 ½”
(114mm)
MODEL DESCRIPTION
CM-45 4 1/2” SQUARE PUSH PLATE SWITCH, CONCEALED SCREWS
CM-46
4 1/2” SQUARE PUSH PLATE SWITCH, EXPOSED SCREWS
CM-46CB BLUE 4 1/2” SQUARE PUSH PLATE SWITCH, EXPOSED
SCREWS. AVAILABLE WITH GRAPHIC OPTION ‘/1‘ (BLANK),
‘/2‘ (WHEELCHAIR), AND ‘/4‘ (WHEELCHAIR + ‘PUSH TO OPEN‘) ONLY.
OPTIONS
FACEPLATE GRAPHIC OPTIONS
CM-XX/1 CM-XX/2
CM-XX/4
CM-XX/A4
CM-XX/A2
CM-XX/4F
CM-XX/2AL CM-XX/2AR
CM-XX/4AL CM-XX/4AR
BOX
MOUNTING FOR
TYPICAL SINGLE
GANG ELECTRICAL
CM-45/46
MOUNTING FOR
TYPICAL DOUBLE
GANG ELECTRICAL
(Add suffix to model above)
CM-XX/3
TO LOCK
CM-XX/8
CM-XX/3F
TO LOCK
CM-XX/8B
BOX
Graphic Colors:
TO LOCK
DOOR
CM-XX/8D
VERROUILLER
CM-XX/8F
ARCHITECTURAL FINISHES: (
NOT APPLICABLE TO THE CM-46CB SWITCH)
Blue: /2, /2AL, /2AR, /4, /4AL, /4AR; /4F
Black: /A2, /3, /3F, A4, /8; /8D, 8F,
Red: /8B
CM-XXX-AB ADD ‘AB‘ TO PRODUCT # FOR ANTIQUE BRASS FINISH (BHMA 609, US5)
CM-XXX-SB ADD ‘SB‘ TO PRODUCT # FOR SATIN BRASS FINISH (BHMA 606, US4)
CM-XXX-OB
ADD ‘OB‘ TO PRODUCT # FOR OIL RUB BRONZE FINISH (BHMA 640, US10B)
(NOT COLOR MATCHED) (CANNOT BE CUSTOM LASER ETCHED)
CM-XXX-PB ADD ‘PB‘ TO PRODUCT # FOR POLISHED BRASS (BHMA 605, US3)
5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)
Tel: (905) 366-3377 • Fax: (905) 366-3378 • E-mail: info@camdencontrols.com • www.camdencontrols.com
WEATHERPROOF OPTIONS:
CM-XXX-WT ADD ‘WT‘ TO PRODUCT #
FOR BOOT AND WATER
TIGHT COATING
CONTACT OPTIONS:
DP: ADD DP TO PRODUCT # TO ORDER DPDT
SWITCH INSTEAD OF SPST SWITCH
(USE SPECIAL MOUNTING PLATE/TEMPLATE)
MKTG-LIT-SP-45&46R6
Loading...