Camden Door Controls CM-3000-R, CM-3010-R, CM-3020-R, CM-3030-R, CM-3040-2 User Manual

CM-3000 Series Illuminated Switches

Single Gang and Jamb Width

Installation Instructions

Figure 1 - Door Jamb Cutout

Package Contents

Model #

Part

CM-3000

CM-3030

CM-3100

CM-3130

CM-3010

CM-3040

CM-3110

CM-3140

CM-3020

CM-3050

CM-3120

CM-3150

Orange

Wire

- 1 1

Blue

Wire

1 - 1

Grey

Wire

1 1 2

In-line

Resistor

1 1 1

6-32x¾”

FLT HD

Screws

2 2 2

Description

CAMDEN DOOR CONTROLS CM-

3000 Series Exit Switches are heavy

duty push-buttons designed for

industrial and commercial applications,
where illumination is required. Buttons
are 1 5/8” (40mm) in diameter, and are
available in red or green (other colors
on request). The faceplate is 1/4” thick
brushed aluminum, in 1 3/4” or 2 3/4”
widths. Optional duranodic (US40) finish
is also available.

CM-3000 Series switches utilize UL
listed switch components. Finished
models comply with UL61058 Standard
for Switches. Rated 10 amps @ 30
VDC, either momentary or maintained operation.

Application

Camden illuminated Exit Switches are ideal for high traffic areas such as building front entrances and exits, as

well as institutions, such as hospitals where an
illuminated button is required. They can be surface,
flush, or mullion (narrow stile) mounted.
Camden Illuminated Exit switches are designed to

control electric locks, electro-magnetic locks,
electric strikes, automatic doors, and handicap
operators. They may also be used for automatic
doors, shunting, bypassing alarms, request-to-exit,
timed functions, and many other applications.

Installation

CM-3000, CM-3010, CM-3020, CM-3030, CM-3040
and CM-3050 are supplied with a brushed
aluminum faceplate that can be easily mounted to
a single gang electrical box.

CM-3100, CM-3110, CM-3120, CM-3130, CM-3140
and CM-3150 are supplied with 1-3/4” brushed
aluminum faceplate for door jamb mounting.

Figure 1 shows the cutout required for door jamb mounting.

www.camdencontrols.com
Toll Free: 1.877.226.3369

File:CM-3000_NF_MAN_Rev1.doc
Revised:February 2, 2011

5502 Timberlea Blvd.,
Mississauga, ON Canada L4W 2T7

Figure 2 - 12 Volt LED

Figure 3 - 24 Volt LED
Figure 4 – Single Gang Front

Figure 6 – Narrow Style Front

Figure 5 – Side View

WARNING: Do NOT apply power to the unit until all wiring is complete.

LED Wiring

For 12 V AC or DC power connections, please connect
you LED power leads directly to the center wiring
terminals (X1 and X2) as shown in Figure 2.

For 24 V AC or DC power connections, please use the
supplied resistor in-line with one of the two center
wiring terminals (X1 or X2) as shown in Figure 3.

CM-3000 Illuminted Switches Installation Instructions