Camden Door Controls CM-1200-7012, CM-1200-70122, CM-1200-7024, CM-1200-70242 Specsheet

DOOR ACTIVATION

1 ¾”

DEVICES

KEY SWITCHES

CM-1200

CM-2200

Shown with mortise

cylinder (sold separately)

CM-1200/2200

STAINLESS STEEL KEY SWITCH CONTROLS

FEATURES

• SINGLE GANG AND NARROW STYLE
MODELS

• ACCEPTS STANDARD MORTISE
CYLINDERS, 1” – 1 1/4”

• HEAVY DUTY STAINLESS STEEL
FACEPLATE

• LOCATORS PREVENT CYLINDER FROM
SPINNING

• NO SET SCREWS REQUIRED

• VANDAL RESISTANT

• TAMPER PROOF SCREWS & DRIVER
PROVIDED

• INDOOR OR OUTDOOR
APPLICATIONS

• UL/CSA APPROVED SWITCHES

• 1 OR 2 SWITCHES MAY BE INSTALLED

• LEFT AND/OR RIGHT OPERATION

• WIDE RANGE OF SWITCH
CONFIGURATIONS

• COLOR CODED 18 AWG SOLDERED LEADS

• HEAT SHRINK PROTECTIVE SLEEVE OVER
CONTACTS

• CASTED CENTRE RIB PROTECTS
SWITCHES FROM DAMAGE

• CUSTOM COLOR FINISHES & ENGRAVING
AVAILABLE

• OPTIONAL LED INDICATORS

• FAST & EASY TO INSTALL

Listed
Components

ROHS

COMPLIANT

2 ¾”

(70mm)

(44mm)

CM-1200

CM-2200

4 ½”

(114mm)

4 ½”

(114mm)

DESCRIPTION

Camden Door Controls, CM-1200 and CM-2200 Series flush mount switches meet the
stringent demands of key switch controls. They are designed for use with standard
1”, 1 1/8”, or 1 1/4” mortise cylinders.

The CM-1200 is single gang 2 3/4” width, CM-2200 is only 1 3/4” wide, perfect for
door frames or narrow areas. Both models accept one or two switches, and have a
counter sunk cylinder opening, in a one piece casted assembly. A brass cylinder lock
ring, 2 socket /slotted screws, and 2 tamperproof screws with driver, are also
supplied. (The mortise cylinder is available separately from Camden Door Controls.)
The design and construction makes it ideal for all weather environments. The
assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations
to suit varied commercial and industrial applications, and functions. Camden Key
Switches provide a practical, cost effective means for authorized personnel to control
and signal various functions within a complex.

APPLICATION

CM-1200 and CM-2200 Series Key Switches will control overhead doors, electric locks,
electro-magnetic locks, electric strikes, and motors. They are also used for shunting,
bypassing, timed functions, activating and deactivating CCTV and access control
equipment, and other applications. They are constructed for high frequency use, and
will accept a standard mortise cylinder.

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)
Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

ACCESSORIES KEYPADS SPECIAL PURPOSE SWITCHES HANDS-FREE SWITCHES RF CONTROLS MOUNTING OPTIONS PUSH BUTTONS KEY SWITCHES

STAINLESS STEEL KEY SWITCH CONTROLS

ARCHITECTS /ENGINEERS SPECIFICATIONS

Key Switch Controls to be used throughout the site, or complex will be supplied
exclusively by Camden Door Controls. The CM-1200 and CM-2200 Series key
switches shall be used for all flush mount applications.

The stainless steel faceplate will incorporate a mounting platform for both the
cylinder and switches, in a single piece construction. The faceplate will have 180°
locators so that set screws shall not be required to prevent the cylinder from
rotating. Only a brass cylinder lock ring will be employed to hold the mortise
cylinder to the faceplate. The key switch shall be supplied with stainless steel
Torx or snake eye security screws.

The stainless steel faceplate with casted mounting platform, will have two holes
for switch mounting. It shall be possible to select either left or right operation.
In areas requiring dual control, two switches shall be used offering bi-directional
operation from the same key switch.

The switch component used will be a UL/CSA approved type, rated for 6A/30VDC.
Switches are to be supplied with color coded soldered leads, encased
in heat shrink tubing. The switch must be protected from accidental damage
from the cylinder cam, by having an integral metal centre rib incorpor ated into
the design of the faceplate.

ORDERING INFORMATION

⁄”

(3mm)

1 ½”

(38mm)

2 ¾”

(70mm)

CM-1200/CM-2200

3 ¼”

(83mm)

4 ½”

(114mm)

CM-1200

All CM-1200 and 2200 Series Key Switches are supplied with a stainless steel faceplate,
cylinder lock ring, 2 socket/slotted screws, and 2 tamperproof screws with driver.
(The mortise cylinder is not included, but is available from Camden Door Controls.)

MODEL MODEL DESCRIPTION

SINGLE NARROW
GANG STYLE

CM-1200 CM-2200 1 SPST MOMENTARY SWITCH, N/O
CM-1205 CM-2205 1 SPST MOMENTARY SWITCH, N/C
CM-1210 CM-2210 1 SPST MAINTAINED SWITCH
CM-1220 CM-2220 1 SPDT N.O. & N.C. MOMENTARY
CM-1230 CM-2230 1 SPDT N.O. & N.C. MAINTAINED

CM-1250 CM-2250 2 SPDT MOMENTARY SWITCHES
CM-1260 CM-2260 2 SPDT MAINTAINED SWITCHES
CM-1270 CM-2270 1 SPDT MAINTAINED, +

1 SPDT MOMENTARY

CM-1280 CM-2280 1 DPDT MOMENTARY SWITCH
CM-1282 CM-2282 2 DPDT MOMENTARY SWITCH
CM-1290 CM-2290 1 DPDT MAINTAINED SWITCH
CM-1292 CM-2292 2 DPDT MAINTAINED SWITCH

FOR LED INDICATORS, ADD:

-7012 RED 12V LED

-7112 GREEN 12V LED

-7212 RED & GREEN 12V LED’S

-7024 RED 24V LED

-7124 GREEN 24V LED

-7224 RED & GREEN 24V LED’S

-7412 AMBER 12V LED

-7424 AMBER 24V LED

-7612 BI-COLOR 12V LED

-7624 BI-COLOR 24V LED

1 ⁄”

(43mm)

3 ¼”

(83mm)

4 ½”

(114mm)

CM-2200

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)

Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

MKTG-LIT-SP-12&2200-R4