Camden Door Controls CM-1082-7012, CM-1082-70122, CM-1082-7024, CM-1082-70242, CM-1082-7112 Specsheet

DOOR ACTIVATION

(70mm)

DEVICES

Listed
Components

ROHS

COMPLIANT

KEY SWITCHES

CM-1000

SURFACE MOUNT KEY SWITCH CONTROLS

FEATURES

CM-1000

Shown with

mortise cylinder

(sold separately)

2 ¾”

CM-1000

4 ½”

(114mm)

• WALL, PIPE OR PEDESTAL MOUNT

• ACCEPTS STANDARD MORTISE
CYLINDERS, 1” – 1 1/4”

• HEAVY DUTY 1/4” THICK ALUMINUM
PLATE

• 1 PIECE DIE CAST CONSTRUCTION

• LOCATORS PREVENT CYLINDER FROM
SPINNING

• NO SET SCREWS REQUIRED

• VANDAL RESISTANT

• CYLINDER SITS FLUSH TO FACEPLATE

• TAMPER PROOF SCREWS & DRIVER
PROVIDED

• INDOOR OR OUTDOOR APPLICATIONS

• WEATHER RESISTANT SURFACE
MOUNT BOX

• HEAVY DUTY RUBBER GASKET

• UL/CSA APPROVED SWITCHES

• 1 OR 2 SWITCHES MAY BE INSTALLED

• LEFT AND/OR RIGHT OPERATION

• WIDE RANGE OF SWITCH
CONFIGURATIONS

• COLOR CODED 18 AWG SOLDERED LEADS

• HEAT SHRINK PROTECTIVE SLEEVE
OVER CONTACTS

• CASTED CENTRE RIB PROTECTS
SWITCHES FROM DAMAGE

• BRUSHED ALUMINUM FINISH

• CUSTOM COLOR FINISHES AND
ENGRAVING AVAILABLE

• OPTIONAL LED INDICATORS

• FAST & EASY TO INSTALL

DESCRIPTION

Camden Door Controls, CM-1000 Series surface mount switches meet the stringent
demands of key switch controls. They are designed for use with standard 1”, 1 1/8”,
or 1 1/4” mortise cylinders. Fabricated from 1/4” thick aluminum, into a one piece
die cast construction, with unique Camden Door Controls features. All controls
provide for one (1) or two (2) switch configurations.

The CM-1000 Key Switch is supplied with a weather resistant aluminum utility box,
with a 1/2” threaded opening and close-up plugs. Also included are rubber gasket,
brass cylinder lock ring, 4 socket/slotted screws, and 2 tamperproof screws with
driver. (The mortise cylinder is available separately from Camden Door Controls).
The design and construction make it ideal for all weather environments. The
complete assembly is tamper and vandal resistant.

CM Key Switches are flexible, and can be supplied in numerous switch configurations
to suit varied commercial and industrial applications, and functions. Camden Key
Switch Controls provide a practical, cost effective means for authorized personnel to
control and signal various functions within a complex.

APPLICATION

CM-1000 Series Key Switches will control overhead doors, electric locks, electro­magnetic locks, electric strikes, and motors. They are also used for shunting,
bypassing, timed functions, activating and deactivating CCTV and access control
equipment, and other applications. They are constructed for high frequency use,
and will accept a standard mortise cylinder.

ACCESSORIES KEYPADS SPECIAL PURPOSE SWITCHES HANDS-FREE SWITCHES RF CONTROLS MOUNTING OPTIONS PUSH BUTTONS KEY SWITCHES

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)
Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

SURFACE MOUNT KEY SWITCH CONTROLS

ARCHITECTS / ENGINEERS SPECIFICATIONS

Key Switch Controls to be used throughout the site, or complex will be supplied
exclusively by Camden Door Controls. CM-1000 Series key switches will be used
for all surface, and/or pedestal applications.

The faceplate will incorporate a mounting platform for both the cylinder and
switches, in a single piece construction. The faceplate will have locators spaced
180° apart so that set screws will not be required to prevent the cylinder from
rotating. Only a brass cylinder lock ring will be employed to hold the mortise
cylinder to the faceplate. The one piece 1/4” thick aluminum assembly will be
tamper and vandal resistant, with a countersunk cylinder opening, and beveled
edges. The key switch will be supplied with stainless steel Torx or snake eye
security screws.

The one piece faceplate with casted mounting platform will have two holes for
switch mounting. It will be possible to select either left or right operation. In
areas requiring dual control, two switches will be used offering bi-directional
operation from the same key switch.

The switch component used will be a UL /CSA approved type, rated for 6A/30VDC.
Switches are to be supplied with color coded soldered leads, encased in heat
shrink tubing. The switch must be protected from accidental damage from the
cylinder cam by having an integral metal centre rib incorporated into the design
of the faceplate.

The surface mount utility box will be constructed out of thick wall aluminum,
with a threaded 1/2” conduit entry. A weather resistant heavy duty rubber gasket
will be supplied with each box.

2”

(51mm)

CM-1000

4 ½”

(114mm)

ORDERING INFORMATION

All CM-1000 Series Key Switches are supplied with an aluminum surface mount
switch box, brushed aluminum faceplate, rubber gasket, cylinder lock ring,
4 socket/slotted screws, 2 tamperproof screws, and screw installation tool.
(The mortise cylinder is not included, but is available from Camden Door Controls.)

MODEL DESCRIPTION

CM-1000 SURFACE MOUNT, 1 SPST MOMENTARY SWITCH, N/O
CM-1005 SURFACE MOUNT, 1 SPST MOMENTARY SWITCH, N/C
CM-1010 SURFACE MOUNT, 1 SPST MAINTAINED SWITCH
CM-1020 SURFACE MOUNT KEY SWITCH, SPDT N.O. & N.C. MOMENTARY
CM-1030 SURFACE MOUNT KEY SWITCH, SPDT N.O. & N.C. MAINTAINED
CM-1050 SURFACE MOUNT, 2 SPDT MOMENTARY SWITCHES
CM-1060 SURFACE MOUNT, 2 SPDT MAINTAINED SWITCHES
CM-1070 SURFACE MOUNT, 1 SPDT MAINTAINED, + 1 SPDT MOMENTARY
CM-1080 SURFACE MOUNT, 1 DPDT MOMENTARY SWITCH
CM-1082 SURFACE MOUNT, 2 DPDT MOMENTARY SWITCH
CM-1090 SURFACE MOUNT, 1 DPDT MAINTAINED SWITCH
CM-1092 SURFACE MOUNT, 2 DPDT MAINTAINED SWITCH

FOR LED INDICATORS, ADD:

-7012 RED 12V LED

-7112 GREEN 12V LED

-7212 RED & GREEN 12V LED’S

-7024 RED 24V LED

-7124 GREEN 24V LED

-7224 RED & GREEN 24V LED’S

-7412 AMBER 12V LED

-7424 AMBER 24V LED

-7612 BI-COLOR 12V LED

-7624 BI-COLOR 24V LED

FOR FINISHES, ADD:

‘BZ’ DARK BRONZE FINISH
(BHMA 710, 313AN)

5502 Timberlea Blvd. Mississauga, ON Canada L4W 2T7 • Toll Free: 1 877 226-3369 (CAMDEN9)

Tel: [phone] • Fax: [phone] • E-mail: [e-mail] • www.camdencontrols.com

MKTG-LIT-SP-1000-R4