Cambro CMBH1826LTR Specifications
PMS 185 + Black
PMS 185 + White
2 colors
Camtherm
FOOD HOLDING CABINETS
HOT today
HOT today
®
COLD tomorrow!
COLD tomorrow!
48
Energy Efficient Than a Leading Metal Cabinet
%
More
• Hot or Cold and Hot Only models
• Plugs into standard 110V outlet
• Maintains humidity and consistent temperature throughout
DURABILITY THAT MAKES A DIFFERENCE
®
Camtherm®Food Holding Cabinets
Plugged or unplugged, Camtherm
Bulk Food Holding Cabinets hold and
transport hot or cold food within the
kitchen, on the truck, or at the point of
delivery or service. An environmentallyfriendly alternative to traditional metal
holding cabinets and refrigerators, the
Camtherm will expand your kitchen
capacity, maximize productivity, and
hold food safely for hours. Moist food
will stay moist and crisp food will
stay crisp.
Hot or Cold Camtherm
Discover how one cabinet can do the work
of two appliances to increase your storage
capabilities and menu flexibility. Need to
serve cold salads and sandwiches for
lunch and hot entrees for dinner? Simply
flip the switch and the cold holding used
earlier for refreshing lunches becomes a
hot holding cabinet for delicious dinners.
Each cabinet combines extreme durability
and excellent insulated holding performance
with simple, ener
gy-efficient thermoelectric
heating and cooling with:
• No Compressor
• No Heating Coil
• No Humidifier
Hot Only Camtherm
Hot Only Camtherm offers a safe and
energy-efficient alternative to metal hold-
ing cabinets. Food moisture is naturally
retained without a humidifier, while crisp
foods are kept crisp without a heating
coil. Thick, polyethylene foam insulation
keeps heat inside, while outer surfaces
remain cool to the touch. Thanks to this
thick insulation, even when the Camtherm
cabinet is unplugged, foods are kept at
safe temperatur
es for hours!
Both Hot or Cold and Hot Only Camtherm Cabinets
are available in low and tall profile models.
2 CAMBRO
®
www.cambro.com
Go Anywhere. Plug in Anywhere.
Save Electricity with Camtherm
In an independent laboratory test, Camtherm was tested against
a same-capacity, leading metal cabinet for energy efficiency.
The results: Over the course of 8 hours of holding, the Camtherm
cabinet used 48% less electricity than the metal cabinet.
Model Total Energy Consumption Over 8 Hours
Camtherm 2.06 kilowatt hours
Metal Cabinet 3.95 kilowatt hours
Difference 1.89 less
Testing was conducted at OCM Test Laboratories, Anaheim, California, May, 2006.
Hot-only cabinets were preheated to 165˚F (74˚C) and filled with 12 full-sized pans
of hot water. Energy consumption was measured for an 8-hour period, beginning
after units were preheated and loaded. Doors of each cabinet were opened and
closed simultaneously on a regular basis, as in normal use. Total energy usage of
the Camtherm Cabinet was 38% less than the metal cabinet when consumption
was measured for preheat, loading and 8-hour holding period.
®
IT’S ELECTRIC!
48
48
%More
%More
Energy Efficient
Than a Leading Metal Cabinet
Electrical Specifications
LOW PROFILE
olts
V
Plug type Nema 5-15P Nema 5-15P
Maximum amp draw 9.1 amps 13.7 amps
Amps run on 8.5 amps 13.2 amps
Watts 1100 1800
Hertz 50/60 50/60
Power input of heating unit 120 VAC 125 VAC
110V
TALL PROFILE
110V
www.cambro.com CAMBRO
®
3
Loading...