ASSEMBLY INSTRUCTIONS
EXTENDABLE DINING TABLE
CC-320617
CUSTOMER SERVICE INFORMATION
Please do not return to the store. If any pieces are missing call our toll free number at
1-888-287-4275 from 9:00 am to 5.00 pm CST (Monday to Friday) for replacement parts.
For faster service, have the style number handy when calling.
GENERAL INFORMATION & TIPS
1. Please read the assembly instructions prior to assembling the table.
2. To avoid damage, assemble the table on a non-abrasive surface such as carpet.
3. Make sure all bolts tightly fastened before the table is used.
4. This table is not for commercial use.
Please make sure you have all parts before beginning assembly. Please wait until all steps
are completed before tightening bolts.
Allen wrench. For tightening all bolts.
It's included in hardware list.
PARTS AND HARDWARE LIST
A. Table top
QTY: 1 pc QTY: 2 pcs QTY: 1 pc
D. 2 3/4" Bolt
QTY: 8 pcs + 1 QTY: 4 pcs + 1
G. Washer
B. Leg frame C. Cross bar
E. 1 1/2" bolt F. Spring Washer
QTY: 8 pcs + 1
H. Umbrella hole plug
QTY: 8 pcs + 1 QTY: 1 set
1
ASSEMBLY INSTRUCTIONS
STEP 1
B
E
B
C
E
G
F
A
D
- Put the table (A) face down on a flat non-abrasive surface.
- Attach the leg frames (B) into table top (A) and secure using washers (G), spring washers (F) and
2 3/4" bolts (D) as diagram shown.
** DO NOT TIGHTEN ALL BOLTS YET.
- Next, attach the cross bar (C) into pre-assembled leg frames (B) and insert 1 1/2" bolts (E) into
predrilled holes as shown.
- Make sure all parts are correctly connected and tighten all bolts completely using allen wrench.
- Turn the table upright.
STEP 2
STEP 3
FOLDABLE LEAVES
METAL PIN
To extend :
- Pull the table top from each end.
- Unfold the leaves.
- Push both ends of table top together. Make sure metal pins
are matched with holes as diagram shown.
UMBRELLA HOLE COVER
H
OUTER UMBRELLA HOLE
Put the umbrella hole plug (H) into hole of table top (A) as diagram shown.
2
MAINTENANCE
gray color transformation does not in any way affect the durability of the furniture.
n of the world’s forest resources and is diligent
Due to teak wood’s natural characteristics, wood color and grain variations may be
present. This is a symbol of the originality of each unit and gives each finished piece a
distinctive look and inherent charm.
Care Instruction :
Teak wood, when left bare and unsanded, will naturally fade to a silver-gray color. This
silver-
To maintain the smooth finish and golden brown color of your teak furniture, you will
need to sand the furniture regularly. To prolong the period of time needed between
sanding, teak oil may also be applied.
If you choose to apply teak oil, apply every 6 months, or follow the teak oil container
directions. Again, if you choose to maintain the smooth brown finish of your teak
furniture, this method requires some regular maintenance, such as sanding and
reapplication of teak oil. Teak oil, along with sanding, will help maintain the golden
brown color.
Staining :
Please note, once you stain your teak, it will not return to the natural golden brown or
weathered silver-gray color without sanding off the stain. Staining is intended to be
permanent. If you choose to stain your furniture after it has turned silver-gray, you must
first sand it before applying the stain.
Do not leave your teak wood furniture in puddles of water or on wet ground.
Cover your teak wood furniture during winter months or move into covered
storage, if in wet climates.
The manufacturer supports protectio
in sourcing legally harvested wood.
Thank you
The manufacturer
3
1 year Limited Warranty
from exposure to elements, oil spills, fluids or chemicals; glass against breakage; hardware
Warranty is to the original purchaser when items are purchased from one of our authorized
The furniture is warranted to be free from defects in material and workmanship of the
original product when purchased from one of our authorized dealers. If a product fails
and is under the terms of our limited warranty, the item will be replaced, usually for a
small fee. In the case of discontinued models, an item of similar quality and style will be
offered to the customer.
1 year limited frame warranty
Frames are warranted to be free from defects in material and workmanship.
Fading or discoloring caused by putting the product under sunlight or rain is not
covered by this limited warranty. Damage to the frame due to improper assembly
or exposure to water and sub-freezing temperatures is not covered. ( Do NOT
allow water to accumulate inside frame )
Finish
The finish is warranted against peeling, cracking, or blistering for a period of 1
year, provided the unit has not been scratched or abraded. Scratches and chips
resulting from normal wear and use are not covered. Peeling resulting from
exposure to elements is not covered.
Warranty Exclusions : Furniture used for commercial, contractor or any non-residential
purposes, clearance items, display models or items purchased “as is”, freight damage,
furniture damaged by acts of nature, vandalism, fire, abuse, lack of proper care and
maintenance, or improper assembly, straps and fabric against fading or discoloration
against corrosion or rusting; buckling or splitting of tubing resulting from exposure to
water and freezing temperatures. Also excluded: loss of use or time, inconvenience,
money, travel, packaging or any other consequential or incidental damages. In no event
shall the manufacturer’s responsibility exceed the value of the replacement product.
retailers and is not transferable. All warranty claims must be submitted with a dated
register receipt within the warranty period. Should replacement of the warranty
item be unavailable, the manufacturer reserves the right to substitute items of our choice
that are of similar style and quality. For quality control purposes and verification, we
reserve the right to request photography of the damage item(s). The terms of this
warranty are subject to change without notice.
4
Loading...