HDMI CONNECTION TO ZONE 2
PLAYING THE SAME VIDEO/AUDIO IN BOTH ZONES. .....2
HDMI CONNECTION TO ZONE 2
PLAYING DIFFERENT VIDEO/AUDIO IN EACH ZONE. .....3
PRE-OUT CONNECTION TO ZONE 2
PLAYING THE SAME AUDIO IN BOTH ZONES. .....................4
PRE-OUT CONNECTION TO ZONE 2
PLAYING DIFFERENT AUDIO IN EACH ZONE. ....................5
SPEAKER CONNECTION TO ZONE 2
PLAYING THE SAME AUDIO IN BOTH ZONES. .....................6
SPEAKER CONNECTION TO ZONE 2
PLAYING DIFFERENT AUDIO IN EACH ZONE. ....................7
TABLE OF CONTENTS
ZONE 2 SETUP GUIDECXR200
ZONE 2 SETUP GUIDECXR200
2
1
Switch on Zone 2
– Using the remote: Press and hold the Zone 2 button, then press the Standby button.
– Using the Cambridge Connect app.
– On the front panel: Press the Zone 2 button (Zone 2 will be shown on the display), then press
the Standby button.
– In the Zone 2 Settings menu within the OSD: Zone 2 Power On.
2
Setting the Zone 2 Source to ‘Follow Main Zone’ will ensure that any video/audio (multi-
channel or stereo) that is playing in the Main Zone will be duplicated and sent to Zone 2.
CXR Setup Menu
Speaker Setup
Input Setup
Zone 2 Settings
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
Zone 2 Power
Zone 2 Source
Zone 2 Power On Volume
On
Follow Main Zone
- 30 dB
Any multi-channel audio source (eg. Blu-ray movie) playing in the Main Zone will be sent to the
Zone 2 TV as a 2CH PCM (stereo) downmix when Follow Main is selected.
Notes:
• Using HDMI connection for Zone 2 you will be using the TV in Zone 2 to play the audio and
video. The TV must have speakers.
• When using Follow Main, the same audio will be heard in both zones. Whatever source is
selected in the Main Zone will be repeated as stereo in Zone 2. This means that any source can
be heard in Zone 2.
ZONE 2
HDMI CONNECTION TO ZONE 2
PLAYING THE SAME VIDEO/AUDIO IN BOTH ZONES.
HDMI
Up to 7.2 speaker connection
HDMI
MAIN ZONE
3
1
Switch on Zone 2:
– Using the remote: Press and hold the Zone 2 button, then press the Standby button
– Using the Cambridge Connect app
– On Front panel: press the Zone 2 button (Zone 2 will be shown on the display), then press the
Standby button
– In the Zone 2 Settings menu within the OSD: Zone 2 Power On
2
The Zone 2 source can be selected using the remote control, front panel, app and the Zone
2 Settings menu.
CXR Setup Menu
Speaker Setup
Input Setup
Zone 2 Settings
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
Zone 2 Power
Zone 2 Source
Zone 2 Power On Volume
On
Source 3
- 30 dB
When setting the Zone 2 Source to any source that is the dierent from the main zone, the ‘raw’
audio and video will be sent into Zone 2, as output by the source. The audio is not down-mixed
to stereo in Zone 2 if you are not using the Follow Main feature.
If the selected Zone 2 Source has a stereo audio signal (eg. 2.0CH satellite signal/FM/Stream
Magic) the Zone 2 TV will be able to play both the audio and video signal.
If the selected Zone 2 Source has a multi-channel audio signal (eg. BD player/5.1 satellite signal)
the Zone 2 TV must be able to play/decode multi-channel HDMI audio, otherwise no sound will
be heard in this case.
Notes:
• Using HDMI connection for Zone 2 you will be using the TV in Zone 2 to play the audio and
video. The TV must have speakers.
• In Zone 2, if you want to watch/listen to a dierent source to the Main Zone, then we recommend
that the Zone 2 TV is able to play/decode multi-channel HDMI audio. If not, then for multichannel audio sources, only the picture will be displayed in Zone 2.
• The TV source (ARC) is only available in Zone 2 when set to Follow Main.
ZONE 2
HDMI CONNECTION TO ZONE 2
PLAYING DIFFERENT VIDEO/AUDIO IN EACH ZONE.
HDMI
Up to 7.2 speaker connection
HDMI
MAIN ZONE
Loading...