Cambridge ADEP60150PKGBNNH User Manual

Acrylic Pedestal Installation

Read the instructions below and follow all local plumbing and building codes.

Unpack and inspect your Tub and Pedestal for any shipping damages and

ensure no pieces are missing.

If any damages are discovered, DO NOT INSTALL

Please contact customer service at 1(866)448-Tubs. You may also call our

customer service for any other assistance with our products

Before installing it is suggested to have a blanket or soft
surface to avoid scratches while the tub is turned upside

down while attaching the pedestal.

TOOLS AND MATERIALS NEEDED :

17MM Socket Wrench Blanket Level

It is suggested to have atleast one partner in this installation

1. Begin by laying a blanket or soft cover on the
ground and flipping the tub upside down onto
the soft surface.
Once flipped, remove the plastic caps, nuts, and
washers off of the bolts protruding from the
bottom of the tub. Set these aside for later steps.

2. Unpack the pedestal and slip the bolts of the
tub through the holes in each bracket of the
pedestal.

4. Once the position of the pedestal is
correct, have your partner apply pressure to
the pedestal and use the nuts and washers
that were originally on the bolts of the tub to
tighten the pedestal to the tub.

5. With the pedestal fully secured to the tub,
adjust the levelers (Feet) of the pedestal to all
be at the same heighth. Using a level here is
suggested to garentee a level installation.

6. After adjusting the levelers (Feet) to the
correct heighth, flip over the pedestal tub and
use your level to double check the level of the
tub. If adjustments need to be made, now is the
time to flip the tub and make adjustments.

RRepeat this step untill completely level to finish
the installation.

3. Before tightening down the pedestal, ensure
the crease around the tub is properly alligned.
If you notice any issues you can move the
pedestal around on the tub (while keeping the
bolts in the brackets) to find the correct
positioning for the pedestal.