Cambo X2-PRO User Manual

MAIN OPERATING INSTRUCTIONS

X2-PRO

Digital Solutions

1. INTRODUCTION

1 2 4 5 6 7 8

9

3

11 12 13 14 15 16 17 18

19

20

21

22

10

Cambo now introduces the new generation technical camera that combines the latest
technology of today’s digital SLR cameras with full lens shift and tilt possibilities.
These instructions give short information about the main functions of this new photographic
system.

2. LIST OF FUNCTIONS

1. Column Tilt / Lateral Shift

2. Knob Lateral Shift

3. Knob Tilt

4. Lens Plate Housing

5. Locking lever Lens Plate

6. Lens Plate

7. Spirit Level Front Housing

8. Front Bracket

9. Base Bracket Lens Plate

10. Column Swing / Rise & Fall

11. Knob Swing

12. Knob Rise & Fall

13. Locking Knob Focus

14. Focus Knob

15. Spirit level 1 Focus Block

16. Focus Block

17. Shift Profile

18. Spirit level 2 Focus Block

19. Pin Mounting Block

20. Rear Standard

21. Mount Block DSLR Camera

22. Lever Mount block clamp

2

23. Safety knob Lever Lens plate

5 23 24 7 6 25 26 27

24. Bellows

25. Scale Swing (Tilt)

26. Scale Rise & Fall (Lateral Shift)

27. Scale Focus

28. Front Ring Bellows (3C)

29. ¼” Thumb Screw (3F)

INSTRUCTIONS

These instructions describe the main functions of the X2-PRO camera system.
Firstly the set-up of the camera in general is described. Then the possible lenses and interfaces are
presented. Finally the way to work with this new camera system is pointed out.

3 Camera Assembly

3A. Checking your parts list

Remove all camera parts from the carton box. To make a complete system make sure that you have one of
each of the following:

- X2-PRO Camera Body (is completely assembled)

- Mountblock DSLR camera (see 3B)

- Bellows with bayonet fitting appropriate DSLR camera (see 3B)

- Lens Plate (see 3C)

- Lens (see 3C)

- Your DSLR camera

3