AIR COOLER
MODEL: AC 700 TRL
(Please read these instructions carefully before using for first time. Keep these instructions safe
for your future reference.)
INTRODUCTION
●Thank you for purchasing our air cooler.
●Each unit has been manufactured to ensure safety and reliability.
●Before first use, read the instructions carefully and keep it for further reference.
DIAGRAM
PERFORMANCE PARAMETERS
Model
Rating Power
Power
Max Water Injection Rate
Specification
AC 700 TRL
220V, 50Hz
110W
6L
Cooling only
FUNCTIONS
● Principle of Cooling: Water is took from the water tank by pump to the top, then the water
drops into paper evaporator . When the water in paper evaporator evaporates to water vapor, the
air is cooled. People will feel cool wind when the cool air is delivered by fan.
● Electronics control: safe and durable, attractive appearance.
● Adjustable speed and fan type: have three speeds and fan types, blow at a wide angle.
● Cooling: Through air evaporating, cut down the air temperature and raise relative humidity.
● Deliver wind at a wide angle: swing the blades automatically, deliver wind at horizontal wide
angle. Swing the blades transversely manually, select the direction discretionarily.
● Remote control: 6 meters far away, receive at 60 degree wide angle.
ASSEMBLING AND WATERING
1. Assembling castors: put the appliance on a flat surface, take out the wrench from foam box, then
assemble the castors.
Attention: the back castors are with brake, but the front ones are without.
2. Watering: pull 1/3 water tank, then add clean water
Attention:
a. Pay attention to the level of water tank when add water.
b. The level of water tank should not over “MAX” scale at any time, when humidifying, the
total level of water tank should not below “MIN” scale.
c. Put ice or frozen ice box to the water tank if you want to strengthen the efficiency of
cooling. But the total level of water tank should not over “MAX” scale.
CONTROL PANEL
OPERATION
● Timer key: press this key, the timer from 0.5 to 7 hours options with step 0.5 hours. It will
shutdown if the timer finished.
● ON/OFF at the back side: Please find this key and turn on the power at the BACK of appliance,
the air cooler will be ready, at the same time the buzzer reminds “Bi”. When the appliance need
stop to work, please turn off.
● ON/OFF on control panel : Press the key, turn on the appliance, second press, shut it down.
● Wind type: press this key, you can choose the normal wind, natural wind and sleeping wind
circularly. Under the situation of normal wind it has no corresponding indicator light, but others
have.
● Humidify: press the key to start the humidification function.
● Cooling: press the key to start cooling system. IMPORTANT: Please be sure there is enough
water in the water tank before press this key.
● Swing: press the key, the wind swings horizontal automatically. NOTE: Swing the blades
transversely manually, select the direction discretionarily.
● Anion: press the key to make the anion.
● speed: press this key, the corresponding function changes as follows when you press the key
serially: LOWMEDIUMHIGHLOW。
THE USE OF ICE BOX
The ice box has a particular feature of keeping cool, it can absorb heat and let the water temperature
below the environmental temperature.
Using methods：
a. add water to the ice box (not full) and put it into the refrigerator to make sure that it iced
absolutely.
b. Open the door, put the frozen ice box into the water tank.
c. There have two ice boxes , can be used circularly.
CAUTION
1. Use as per the rating voltage.
2. Do not repair or remake the appliance by yourself, it should be repaired by the repairmen.
3. Do not operate the appliance with wet hands, in order to avoid damage.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a damage.
5. When the appliance is not in use, switch off and unplug it.
6. Do not insert foreign things to air outlets and inlets, in order to avoid damage.
7. Do not use the appliance near explosive and combustible gas. Avoid long-term direct solar
radiation.
8. Use the appliance only on a flat surface.
9. Do not use outdoors.
10. The level of water tank should not over “MAX” scale at any time, when humidifying, the total
level of water tank should not below “MIN” scale.
11. After adding water to the water tank, do not tilt or knock over it when you put or move. If you
want to move , please push slowly from the side, in order to avoid spilling.
12. Do not turn over the appliance. If it is toppled over and there are some water in the body, should
unplug the power supply first. Then send it to the repair department or after-sales service and
overhaul the appliance.
13. Do not cover the air vent.
14. Clean the appearance with a lightly damp cloth. Do not use any type of detergents or solutions.
Do not rinse the appliance.
15. Do not make air outlets and inlets near the wall or curtain.
16. Do not knock or shake the body when using, otherwise it may cause stop automatically.
17. The water in tank will easily metamorphose and has odor in summer, please renew the water
frequently.
18. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for their
safety.
19. Children should be supervised to ensure that they do not play with the appliance.
20. To avoid the risk caused by instability of unit, you must fix the unit firmly according to manual
book.
21. Fan for temperate climates only.
22. Should it be necessary to move the unit after the water has been added, roll gently to the
required position and activate the bracket the castors.
23. The power cord is with “Y” type connection and it must be changed by professional
technicians if necessary.
CLEANING AND MAINTENANCE
WARNING: Ensure that the fan is switched off from the supply mains before removing the
air filter screen.
1. Clean the air filter screen (map 1)
Cut off the power supply, pull the handle of air filter screen, remove it from appliance.
Clean the air filter screen with neutral detergent and banister brush, then clean it with clear
water. Finally, reinstall to the appliance.
2. Clean the wetted pad (map2)
Cut off the power supply, take down the air filter screen, then draw the wetted pad from
support. Clean the wetted pad with neutral detergent and banister brush, then clean it with
clear water. Finally, reinstall to the appliance.
Attention: the wetted pad must be installed horizontally, in order to avoid leaking.
3. Clean the water tank (map 3)
Cut off the power supply, open the door, take out the water tank, clean it with neutral
detergent, and wash it with clear water, then reinstall to the appliance.
4. Clean the shell
Clean with neutral detergent and soft cloth.
Attention: cut off the power supply when clean the appliance as there have a high pressure
in the body. Do not leave any water on the surface of control panel.
MALFUNCTION AND MAINTENANCE
Malfunction
Causes
Solution
No action
1. Power off or poor
connection.
2. Not press the “ON” key
on the control panel.
1. Plug the power cord and
make sure it connects
well.
2. Press the “ON” key on the
control panel.
Poor effect of dust
1. Block the air filter screen
with dust.
2. Block the air inlet with
foreign things..
1. Purify the air filter screen.
2. Remove foreign things
from the air inlet.
Repair the appliance under the situation as follows:
1. Abnormal action or no action. it is invalid by the above approach.
2. Abnormal action caused by ingress of water or foreign things.
www.sbo-brand.com
Call Center : 0-2274-3434
Service Team : 088-008-0808
The Signature Brand Co,,Ltd
771 Prachautis Rd., Samsennok, Huaykwang Bangkok 10310
Loading...