Calumet photographic TRAVELITE User Manual

Retail Locations

New York, NY 10011
16 W. 19th St.
212-989-8500

Cambridge, MA 02141
65 Bent St.
617-576-2600

Philadelphia, PA 19147
1400 S. Columbus Blvd.
215-399-2155

Bensenville, IL 60106
890 Supreme Dr.
630-860-7458

Chicago, IL 60622
1111 N. Cherry Ave.
312-440-4920

San Francisco, CA 94110
2001 Bryant St.
415-643-9275

Santa Barbara, CA 93101
228 E. Cota St.
805-965-7053

Santa Ana, CA 92705
1430 S. Village Way, Suite A
714-285-0143

San Diego, CA 92025
830 W. Valley Parkway
760-737-6002

Los Angeles, CA 90038
1135 N. Highland
323-466-1238

USER GUIDE

1-800-CALUMET (225-8638)
www.calumetphoto.com

Table of Contents

Introduction

Description Page

Introduction & Safety Notes 3

Control Panel Guide 4

Connecting and Using Your Travelite 5

Flash Power Control 6

Modeling Lamp Controls 6

Synchronization 6

Changing the Modeling Lamp 7

Changing the Fuse 7

Changing the Flash Tube 7

Mounting and Removing Reflectors 7

Travelite Accessories 8 – 9

Specifications 10 – 11

2

Dear Valued Customer,

Thank you for choosing the Calumet Travelite professional flash system. Accurate, ergonomic,
powerful and simple to use, the Travelite was designed by working closely with photographers
to develop a flash that meets the high standards demanded in professional studios today.

All ‘S-Type’ accessories from the Calumet/Bowens range can be used with the Travelite. For
details of all related products, please call 1-800-CALUMET (225-8638), contact your local
Calumet retail center or visit calumetphoto.com.

In order to obtain the full benefit from your purchase, please take a few moments to
familiarize yourself with this user manual.

Thank you,
Calumet Photographic

Safety Notes

ALWAYS

• Always switch power off and disconnect from
the supply before changing modelling bulb or
flash tube.

• Always disconnect the supply before changing
the fuse. Never replace with a fuse of a different
rating.
A spare fuse is fitted in the fuse holder under the
AC inlet (see page 4).

• Always excercise care when handling equipment
that has been in use. The reflector and front end
of the unit can become Very Hot.

• Always avoid placing cables where they can be
tripped over. Protect from heavy, sharp or hot
objects, which may cause damage and replace
damaged cables immediately.

• Due to the high voltage / high energy used in
Travelites, all servicing must be carried out by a
Calumet-authorized service center.

• Always remove the power cord by gripping the
plug. NEVER pull the cord.

• Always ensure that any extension cord used has
a suitable current rating to prevent overheating
and never use coiled extension cords.

• Always remove the flash head covers before
using.

DO NOT’S

• Do not use in an environment where moisture or
flammable vapor is likely to come in contact with
the unit.

• Do not plug your Travelite into an AC supply and
a Travel-Pak battery at the same time.

• Do not restrict air vents while in use.

• Do not use a unit with damaged housing,
moldings, flash tube or modeling lamp. If the unit
is dropped or damaged in any way, always have
it checked out before using.

• Do not operate the unit without a safe grounded
AC supply.

calumetphoto.com

3calumetphoto.com