Cleaning
al Te st E le ctr on ics
C
Use the following guidelines:
• Clean only the exteriors of any probe, cable or adapter. Use a soft cotton cloth
moistened with a mild detergent and water solution. Do not allow any portion
of the part to be submerged at any time.
• Dry the probe, cable or adapter thoroughly before attempting to make any voltage
measurement.
• Do not subject the products to solvents or solvent fumes as these can cause
deterioration of the body, cables and/or dielectrics.
Cal Test Electronics, Inc.
22820 Savi Ranch Pkwy.
Yorba Linda, CA 92887-4610
USA
Tel : 714-221-9330
Fax : 714-921-9849
E-mail : info@caltestelectronics.com
Web : www.caltestelectronics.com
CT2621C_UserManual_r01
CT2621C
Electrical DMM Kit
al Te st E le ctr on ics
C
al Te st E le ctr on ics
C
© 2016 Cal Test Electronics. All rights reserved.
Cal Test Electronics products are covered by US and foreign patents, issued and
pending. Information in this publication supersedes all earlier versions.
Specification subject to change without notice.
22820 Savi Ranch Pkwy.
Yorba Linda, California 92887
For product information, sales, service and technical support:
• Call: 714-221-9330
• Email: info@caltestelectronics.com
• Worldwide: http://www.caltestelectronics.com
Kit Components
5
.
.
1
tm. Desc ript ion M odel Quant ity
I
1. Sil icone L eads , 150cm (60 ”), B&R CT375 4-15 0 1
2. Pro bes, Fix Tip, 39 00 S eries, B& R CT3 975 1
3. Ex-Lg A llig ator Cl ips, B&R CT328 6 1
4. Adapter, 6mm Spad e, B&R CT266 1 1
5. Rigid A llig ator Cl ips, B&R CT296 6 1
6. Tri- Fold Nylon Po uch, Black CT304 1 1
Probe Cap s)
(
6.
.
2
.
4.
3
Loading...