Wireless calling system
Wireless Calling Receiver
User Manual
(ZJ-82)
Thanks for choosing this wireless calling system. The receiver host adopts RF wireless and learning
code technology. It can easily pair up to 999 channels of wireless calling transmitters and 1 manager
remote controller. The receiver host uses advanced industrial micro processor and high-sensitivity
superheterodyne receiving technology which make the products very stable.
At same time, the wireless calling receiver host has advanced number speaker function, it can
clearly read the number, function, room number and so on and compatibly for different working mode,
suitable for different places.
The wireless calling system has millions of different code which can be paired easily and freely. And
it is widely used in restaurant, café, bar, tea shop, KTV, bank, office, factory, hotel, hospital and so on.
Working frequency: 433.92MHz/315MHz
Working voltage: DC9V/2A
Standby current: <130mA
Working current: <1600mA
Sensitivity: -105dBm
Dimension: 400x157x39mm
--1--
Summany
Technical Data
Adopt the latest industrial stable chipset.
Independent storage avoiding data lost
Memory 20 calling records history
7 prompt voice selectable
Calling number speaker and time whole point speaker
Multiple working mode optional for different places
Self testing technology makes it working well every time
Super error correction
Address data only avoiding repeat
Menu settings voice prompt, easy to set
Calling records display can be fixed or cycle
Calling records cycle display time is adjustable
Adjustable volume
Restore the factory default function
High receive sensitivity
LED tube display, easy to read
Beautiful designing and portable to move
Features
--2--
Button Function & Installation to the wall
Short press to enter settings menu;
Short press to submenu or confirm setting.
Short press to page up the number;
Long press to page up the number quickly;
Browse the calling records.
Short press to page down the number;
Long press to page down the number quickly;
Browse the calling records.
Delete the paired call buttons in pairing settings;
Delete the current calling record.
Back to previous menu or standby status.
Connect power adapter.
Connect to alarm
Audio output 1
Audio output 2
SET
UP
DOWN
DEL
BACK
DC9V
Alarm
Audio 1
Audio 2
Diagram
1st call number
2nd/3rd call number
Antenna
Settings button
Note:
1) The display has 3 numbers in one screen. It shows the latest 3 calling information.
2) It has 3 working modes: 999 mode / Area mode / 99 model+A/b/C functions.
3) When it works with keypad call button, it works as queue calling service.
How to install the display to the wall?
1. Screw the fixed hook on the wall.
2. Hang the receiver up to the hook.
fixed screw
fixed hook
Loading...