Wireless Calling Receiver
User Manual
(ZJ-49PC )
Call
Wireless calling system
999-channel Wireless Calling Receiver
ZJ-49PC User Manual
Features
Summary
Technical data
Thanks for choosing this wireless calling system. The receiver host adopts RF wireless and learning
code technology. It can easily pair up to 999 channels of wireless calling transmitters and 1 manager
remote controller. The receiver host uses advanced industrial micro processor and high-sensitivity
superheterodyne receiving technology which make the products very stable.
At same time, the wireless calling receiver host has advanced number speaker function, it can
clearly read the number, function, room number and so on and compatibly for different working mode,
suitable for different places.
This wireless calling receiver has USB port to connect to the computer, then the user can receive
the calling message, as well as export the calling records to statistics the service efficience and
quality.
The wireless calling system has millions of different code which can be paired easily and freely. And
it is widely used in restaurant, café, bar, tea shop, KTV, bank, office, factory, hotel, hospital and so on.
◆ Adopt the latest industrial stable chipset.
◆ Independent storage avoiding data lost
◆ Calling number speaker and time whole point speaker
◆ Colorful LED indication and connect to the computer
◆ Multiple working mode optional for different places
◆ Self testing technology makes it working well every time
◆ Super error correction
◆ Address data only avoiding repeat
◆ Menu setting voice prompt, easy to set
◆ Calling records display can be fixed or cycle
◆ Calling records cycle display time is adjustable
◆ Timeout calling display flickering prompt
◆ Adjustable volume
◆ Restore the factory default function
◆ High receive sensitivity
◆ LED tube display, easy to read
◆ Beautiful designing and portable to move
Working frequency: 433.92MHz
Sensitivity: -105dBm
Working current: <650mA
Standby current: <200mA
Working voltage: DC12V/2A
Decoding mode: learning code
Modulation: AM
PC connection port: USB port
Size: 410x158x45mm
1
Diagram
Button Function
2
Calling number area
(for transmitter or room)
Function area
(A/B/C/H)
Antenna
Display screen
Function button
Software
Audio out
DC12V
USB
Short press to turn up the number;
Long press to turn up the number quickly;
Browse the calling record.
Short press to turn down the number;
Long press to turn down the number quickly;
Browse the calling records.
Long press for 2sec to enter settings menu;
short press to submenu.
Back to previous menu or standby status.
Delete the paired transmitter in pairing settings;
Delete the current calling record.
Connect to computer by USB cable.
Connect DC12V/2A power adapter.
For test.
Audio output.
UP
DOWN
SET
BACK
DEL
USB
DC12V
Software
Audio out
Loading...