Watch wireless calling receiver
I Instruction ---------------------------------------------1
II Feature ------------------------------------------------1
III Technical data ---------------------------------------1
IV Diagram of function -------------------------------2
V Using method ----------------------------------------3
VI Settings ----------------------------------------------3
VII Additional settings --------------------------------4
VIII List ---------------------------------------------------5
IX FAQ ---------------------------------------------------5
User Guide of
Watch Wireless Calling Receiver
I Instruction
This product concentrates the technology of wireless transportation,
digital identify, LCD display and micro processor together. The system
uses the chipset that contains millions of learning codes, makes the
products very safe and stable performance, as well as avoiding wrong
calling and incorrect display. This product can pair maximum 99 different
calling transmitters.
II Feature
LCD display, easy to read
Wrist watch design, simple to operate and take
Up to 99 calling transmitters matched
Smart wireless signal detecting and anti
Built-in adjustable vibration motor
Time display
III Technical data
1. Working voltage: DC3.6V~4.2V
2. Power-off current: <300μA
3. Standby current: <6mA
4. Working frequency: 433.92MHz
5. Receiving sensitivity: ≥-108dBm
6. Decoding: learning code
7. Modulation: OOK
8. Size: 59x35x16mm
1
IV Diagram of function
UP: in the standby status, press this button to browse the calling
records from 0 to 9;
in the pairing/deleting status, press this button to select number
STU: press this button for 2 sec to enter pairing status;
press this button for 6 sec to delete all the paired transmitters.
SET: Press this button to power on the receiver;
in deleting status, press this button to delete on transmitter;
in standby status, press this button to enter
time/vibration/button mode status.
POW: press this button for 3 sec to power off the receiver.
short press to delete one calling history.
LCD display
Power OFF/Delete record
Power ON
Time/vibration/mode
settings
Pairing
Page up
Times of calling
Function of caller button
Number of caller
DC5V power adapter
2
V Using method
1. Wear the watch receiver to the wrist, and put the transmitter button
to suitable place.
2. Press "SET" button to power off
3. Press the transmitter button to call for service. When the watch
receiver gets the message, it will display on the screen and vibrate.
4. Press "UP" button to browse the calling history, the receiver stores
the latest 10 records.
Note: before calling service, the transmitter should be paired to the
receiver according its numbers.
VI Settings
1. Pairing caller settings
After finish all the pairing, press "STU" button for 2 sec again to quit.
Press "UP" button to
select number from
01 to 99.
Press the transmitter
button, like no. 1.
Receiver shows 01F
and jump next number.
Press and hold on
the button "STU" for
2 sec to learn status.
3
2. Deleting callers
(1) Delete all the paired transmitters
Press "STU" button for 6s to delete all the transmitter buttons
(2) Delete someone transmitter
Press "STU" button for 2s into learning status, then press "UP"
button to select the number want to delete. And then press
"SET" button to delete the transmitter.
3. Vibration settings
Press and hold "SET" button for 2s, the icon in right corner
will flicker. Press "UP" button to adjust the level of vibration.
4. Timing settings
Press and hold "SET" button for 2s again, the hour or minute
position will flicker, then press "UP" button to adjust the time.
5. 2/4-button mode settings
Press and hold "SET" button for 2s again, it enters 2-button mode
or 4-button mode settings.
VII Additional function
1. Low power indication
When the power icon shows empty, please recharge the
battery in time.
2. Wireless interference indication
If there is another RF signal interference source, the icon
will flicker.
is 4-button mode, used for 1/3/4/6-button transmitters.
is 2-button mode, used for 1/2-button transmitters.
4
VIII List
IX FAQ
5
Loading...