Calixto Telit GL86x User Manual

Calixto-Telit GL86x GPRS MODEM
User Manual
© 2013 Calixto Systems Pvt Ltd. All Rights Reserved. No part of this document may be photocopied, reproduced, stored in a retrieval system, or transmitted, in any form or by any means whether, electronic, Mechanical, or otherwise without the prior written permission of Calixto Systems. No warranty of accuracy is given concerning the contents of the information contained in this publication. To the extent permitted by law no liability (including liability to any person by reason of negligence) will be accepted by Calixto Systems or employees for any direct or indirect loss or damage caused by omissions from or inaccuracies in this document.
Calixto Systems reserves the right to change details in this document without notice. Product and company names herein may be the trademarks of their respective owners.
#111, First Floor, 2H Main Road, Kasturi Nagar, Bangalore, India -560 043. Web: www.calixtosystems.com Email: info@calixto.co.in
_____________________________________________________________________________________
Revision History
Date
Revision
Remarks
20/02/2013
0.1 First version created
07/05/2013
0.2 Added pin numbers for
expansion connector.
Table of Contents
1. Introduction ................................................................................................... 5
2. CST-GL86x-MODEM Features: ........................................................................ 5
2.1 General features: ...................................................................................................................... 5
3. Calixto CST-GL86x-MODEM ordering Info ...................................................... 6
3.1 Product Variants ....................................................................................................................... 6
4. Product details ............................................................................................... 6
5. Hardware Description .................................................................................... 7
5.1 Telit GL86x module: .................................................................................................................. 7
5.2 GPRS Antenna .......................................................................................................................... 7
5.3 Power Jack ................................................................................................................................ 8
5.4 LED Indications ......................................................................................................................... 8
5.5 Battery connector ..................................................................................................................... 8
5.6 RS232-DB9 (J2) ......................................................................................................................... 8
5.7 Expansion Connector Slot (J7) ................................................................................................... 9
6. Electrical and Environmental Specification .................................................. 10
7. Communicating with Modem ....................................................................... 10
7.1 Serial Interface mechanism ..................................................................................................... 10
7.2 Communication Software ....................................................................................................... 11
8. Legal Notice ................................................................................................. 12
8.1 Customer Support: ................................................................................................................. 12
8.2 Usage Restriction: ................................................................................................................... 12
9. Warranty and Return Policy ......................................................................... 12
9.1 Warranty Period: .................................................................................................................... 12
9.2 Warranty Coverage: ................................................................................................................ 12
9.3 Product Repair: ....................................................................................................................... 13
9.4 RMA (Return Merchandise Authorization) .............................................................................. 13
1. Introduction
This document talks about details of Calixto’s Telit GL86x based GPRS modem (CST-GL86x-MODEM and CST-GL86x-MODEM-BC). These modems are optimum ready to use solution for customers of Machine to Machine (M2M) applications. This module is based on Telit GL865 GSM/GPRS module. Calixto provides optional battery charging feature for this modem (CST-GL86x-MODEM-BC). Some key application areas include:
Industrial M2M communications
Remote Monitoring and Control
Point of Sale Terminals
Metering
Warehousing
Logistics and Freight Management
.
2. CST-GL86x-MODEM Features:
2.1 General features:
Based on Telit GL86x GPRS module
o DUAL-Band EGSM 900 / 1800 MHz o Embedded TCP/IP, FTP, SMTP o Remote AT commands o License free Python Engine o Low power : 1.5mA @ Idle
Wide power input range from 9 to 24 Volt
o Ideal for automotive applications.
RS232 interface with DB9 connector
Optional battery charger feature
o Ideal for remote monitoring o Part number CST-GL86x-MODEM-BC
Expansion connector with following interfaces of GL86x module
o Auxiliary UART o 2 GPIOS o 2 ANALOG inputs o DAC Output o Audio in and out signala
Antenna connector options
o SMA and uFL options
Dimension
o 47mm x 75 mm
3. Calixto CST-GL86x-MODEM ordering Info
3.1 Product Variants
There are two variants of the module available:
Standard modem with Telit GL868 DUAL module: CST-GL868-MODEM
CST-GL868-MODEM with battery charging interface: CST-GL868-MODEM-BC
Note: There is option for customers to order GL865 QUAD version of the modem. But, minimum order quantity in this case will be 100.
4. Product details
The figures below shows pictures of CST-GL868-MODEM-BC with important components marked. SIM card holder is in the other side of the board as in second picture
.
5. Hardware Description
5.1 Telit GL86x module:
This modem implements all the functionalities including Digital/Analog out using Telit’s GL86x series of GSM/GPRS module. Default version of the module is GL868 DUAL. For orders more than 100 lots, customers have opportunity to order different versions of GL86x modules. This document is not including any details of GL86x module. Customer can get more information from Telit web site for more information.
http://www.telit.com/en/products/gsm-gprs.php?p_id=12&p_ac=show&p=93
http://www.telit.com/en/products/gsm-gprs.php?p_id=12&p_ac=show&p=127
http://www.telit.com/en/products/gsm-gprs.php?p_id=12&p_ac=show&p=110
5.2 GPRS Antenna
Antenna connector allows transmission of radio frequency (RF) signals between the modem and an external customer-supplied antenna. Calixto provides option one of the two antenna connector options. One is uFL and other one is 5050ΩFME male coaxial jack. As an option Calixto provides WIP Antenna with 50ΩFME male coaxial jack connector.
5.3 Power Jack
The power Jack supported is 2mm DC power jack with locking option. The figure below shows the power jack used in the modem.
5.4 LED Indications
There are two LEDs in the CST-GL868-MODEM. LED1 (at D1) is power LED and LED2 (at D6) is GPRS status LED. For CST-GL868-MODEM-BC, there is an additional Charging Indicator LED (D2).
5.5 Battery connector
CST-GL868-MODEM-BC modem has additional battery connector. This is a 2 pin Relimate connector (location B1).
5.6 RS232-DB9 (J2)
This DB9 connector has main UART of the GSM/GPRS module in RS232 level.
Pin No PIN Name Pin Type Signal Type Description
1 NC Not Connected
2 TXD O RS232 Transmit Data of RS232
3 RxD I RS232 Reception Data for UART
4 NC Not Connected
5 GND Gnd Ground
6 NC Not Connected
7 CTS O RS232 Clear to Send
8 RTS I Request to Send
9 NC Not Connected
5.7 Expansion Connector Slot (J7)
Pin No PIN Name Pin Type Signal Type Description
1
VCC_3V8D
Power
3.8V supply (to use outside)
2 VCC_3V8D Power 3.8V Supply (to use outside)
3
GSM_EAR-
AO Audio Earphone Signal out, Phase-
4
GSM_EAR+
AO Audio Earphone Signal Out, Phase+
5
ADC1
AI
ADC ADC Input1
6
ADC2
AI ADC ADC Input2
7
GSM_MIC-
AI
Audio
Mic Signal In, Phase-
8
GSM_MIC+
AI
Audio Mic Signal In, Phase+
9
DAC_OUT
AO D/A Digital to Analog converter from
module
10 GSM_GPIO_7
I/O CMOS 2.8V GPIO 7 or Buzzer from GL86x
11
GSM_GPIO_6
I/O CMOS 2.8V GPIO 6 or ALARM from GL86x
12
AUX_UART_TXD O CMOS 2.8V Module Aux UART transmit(
13
AUX_UART_RXD I CMOS 2.8V Not Connected
14
GND
Gnd
Digital Ground
6. Electrical and Environmental Specification
Parameter
Min Max
Input Power Supply
-DC 9-24V 9-24V
Operating Temperature
00 C
+700 C
Relative humidity
- Operational
10% 90%
7. Communicating with Modem
7.1 Serial Interface mechanism
Customers can interface the modem through main (DB9 Connector). Following are the serial interface format used in Calixto GL86x modem in below figure:
The CST-GL868-MODEM is built around Telit GL86x module. Customers can follow all the programing mechanism suggested by Telit.
7.2 Communication Software
Customer can use any serial terminal program in PC to communicate with modem. We have used “rsterm” for our development and test. Below figure shows typical screen shot of rsterm.
Customer can use either AT commands or program the GL86x module with Python script defined by Telit.
Some of the documents to be referred are:
1. Telit Modules Software User Guide_r13 (1vv0300784 Rev.13 2013-02-14)
2. Telit AT Command Reference guide_r16 (80000ST10025a Rev.16 -2013-02-07)
3. Telit Easy Script Python_r15 (80000ST10020a Rev 15 -2012-10-09)
4. Telit CMUX Implementation User Guide_r3 (1VV0300994 Rv0.3 – 2013-02-15)
5. Telit SIM Access Profile User Guide_r3 (80000ST10029a Rev.3-2011-03-01)
6. Telit IP Easy User Guide_r15 (80000ST10028A rev 15-2013-02-19)
8. Legal Notice
8.1 Customer Support:
Calixto Systems are excited to offer our customers an easy “out of box” experience by providing board support package, software demos, user manuals and other electro mechanical documentation to get our evaluation modules up and running. We also provide further electronic (email, wiki and discussion forum) support for evaluation of our modules using corresponding Calixto boards.
Customer product development support is not part of standard support offer from Calixto systems. If customers are interested, Calixto can offer product development services around Calixto modules.
8.2 Usage Restriction:
Calixto products are excellent starting point for customer’s applications development. But, selection and usage of Calixto systems products for a particular application is responsibility of customers. In order to minimize risks associated with customer applications, the customer must use adequate design and operating safeguards to minimize inherent or procedural hazards.
Calixto systems products are not intended for use in life support systems and appliances, nuclear systems or systems where malfunction can reasonably be expected to result in personal injury, death or severe property or environmental damage. Any use of products by the customer for such purposes are at the customer’s own risk.
Off the shelf products from Calixto systems are commercial temperature grade. If customers are looking for Industrial or Extended temperature products, please order them specifically.
9. Warranty and Return Policy
9.1 Warranty Period:
Calixto Systems guarantees hardware products against defects in workmanship and material for a period of twelve (12) months from the date of shipment.
9.2 Warranty Coverage:
Calixto systems at its sole discretion, to either repair or replace the defective hardware product at no charge. Shipment costs in both directions are the responsibility of the customer. The warranty is void if the hardware product has been altered or damaged by accident, misuse or abuse. The warranty is void if the damage is due to the shipping of the Products and other external causes like problems with electrical power, usage not in accordance with product instruction, and problems caused by use of parts and components not supplied by Calixto systems.
This warranty does not cover any items that are in one or more of the following categories:
a. Software and/or device drivers, b. External devices, c. Accessories or parts added to products after the products shipped from Calixto Systems. d. All Warranty terms are subject to change without prior notice.
9.3 Product Repair:
Calixto systems shall repair the defective products covered under this warranty that are returned to Calixto systems.
Calixto systems shall own all parts removed from repaired products.
Calixto systems will use parts made by various manufacturers in performing the repair. This can be
different from the components used in the original products.
The repaired products shall be warranted subjected to the original warranty only (If the original warranty period left was three months, the repaired product warranty will be only for three months)
Customers shall agree that an independent third party assigned by Calixto Systems may repair the products covered under this limited warranty.
9.4
RMA (
Return Merchandise Authorization)
Customer shall enclose the completed "Calixto Systems RMA Service Form" with the returned packages.
Customers shall provide all the relevant information of the defect in the “Calixto Systems RMA Service
Form”. This will reduce delay in defect identification and repair.
Customers shall take responsibility to ensure that the packages of defective Products are durable enough to be resistant against further damage and deterioration during shipment. In case of damages occurred during the transportation, the repair is treated as “Out of Warranty”.
Loading...