Caline CT-30 Owner`s Manual

WARRANTY

One (1) Year Limited Warranty and Remedies

Subject to the limitations below, DeltaLab®
warrants to the original owner that the
components of this product are free from
defects in workmanship and materials,
subject to normal use and service, for
one (1) year from the date of purchase.
DELTALAB® MAKES NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE.
User is responsible for determining whether
this product is fit for a particular purpose and
suitable for user’s application. If the product
is defective within the warranty period, user’s
exclusive remedy and manufacturer’s sole
obligation will be, at its option, to replace the
product or refund the purchase price. Except
where prohibited by law, manufacturer and
seller will not be liable for any loss or damage

BATTERY

MADE IN CHINA

to Lock

4. Twist Cover

Battery

2. Replace

BATTERY

BATTERY

MADE IN CHINA

Battery Cover

3. Replace

MADE IN CHINA

Battery Cover

1. Remove

arising from the product, whether direct, indirect,
special, incidental or consequential, regardless
of the legal theory asserted, including warranty,
contract, negligence or strict liability.

If you experience any problems with your
DeltaLab product, please contact our toll-free
customer service team at 1-855-450-3685.

California Prop 65 Warning: This product may
contain a chemical(s) known to the state of
California to cause cancer or birth defects or
other reproductive harm.

All trademarks and registered trademarks
mentioned herein are recognized as the
property of their respective holders.

Made in China 1108-9633

locks. Pay attention to polarity.
the battery and rotate cover clockwise until it
battery edge to pop the battery out. Replace
until the compartment opens. Press on the
Rotate the battery cover counter-clockwise

battery.
standard CR2032 3V button-cell lithium
battery. If the screen flashes, replace the
Each Deltalab tuner is shipped with a fresh

www.deltalabeffects.com

Canadian ICES-003 CET.
This Class B digital apparatus complies with

operation.
interference that may cause undesired
accept any interference received, including
harmful interference, and (2) this device must
two conditions: (1) This device may not cause
rules. Operation is subject to the following
This device complies with Part 15 of the FCC

malfunction, electrical shock or fire.
Metal objects or particles can also cause
cause malfunction, electrical shock or fire.
to liquids. Liquids entering the device may
Avoid using this device in close proximity

Foreign Matter

cloth to wipe the surface.
screen. If cleaning is required, use a soft, dry
may cause damage to the finish or display
liquids on the surface of this device. Chemicals
Do not use cleaning chemicals or cleaning

Care

Chromatic

Clip-On Tuner

CT-30

Owner’s Manual

may cause the device to malfunction.
switches on this device. Use of excessive force
Do not apply excessive force to buttons or

Handling

televisions and radios to prevent interference.
Operate this device at a suitable distance from

Interference

leakage into the unit.
extended periods of non-use to prevent battery
preserve battery life. Remove battery during
Turn the power switch off when not in use to

Battery

• Proximity to magnetic fields

• Extreme dust or dirt

• Extreme temperature or humidity

• Direct Sunlight
in tuner malfunction:
Using the tuner in these conditions may result

Environmental conditions

while performing on stage or in the studio.
bright, clear display rotates for easy viewing
tuner in an advanced, portable design. The
The DeltaLab CT-30 is a full-featured clip-on

BATTERY

PRECAUTIONS/SAFETY

PRODUCT DESCRIPTION

FEATURES

MADE IN CHINA

BATTERY

7

8

1

4

2

3

5

TUNING IN METER MODE METRONOME MODE

1. Clip the CT-30 on to your instrument in a
place where it will pickup the vibrations of
the instrument such as the headstock of
a guitar.

2. Press the power button to turn the CT-30
on (pressing the power button again for 2
seconds will turn off the CT-30).

3. When the power is turned on, the reference
pitch defaults to A = 440 Hz . If you wish
to change the reference pitch (calibration),
press the Calibration Button up or down to
increase or decrease the reference pitch in
1 Hz steps over a range of 415Hz -- 466 Hz.
Once the pitch reaches 466Hz, it will start
over at 415Hz.

4. Play a single note on your instrument. The
name of the nearest note will be displayed.

5. Adjust the tuning of your instrument so that
the meter moves to the 0 position (center).
The tuning meter will be to the left of center
if your instrument is flat, or to the right of
center if your instrument is sharp.

The CT-30 has a built in visual metronome.
The metronome provides a visual reference for
keeping time. The LED meter will move back
and forth with the time and the DeltaLab logo
will flash with the time.

1. Press the power button to turn the CT-30
on (pressing the power button again for 2
seconds will turn off the CT-30).

2. Press and hold the metronome button(M) for
2 seconds until the screen changes to the
metronome screen.

3. Select the desired Beats Per Minute (BPM)
using the Calibration Button up/down
arrows. If you prefer to tap the tempo in, the
metronome button also functions as a “tap
tempo” button in metronome mode. Simply
tap in the tempo that you want.

4. Press the power/play button for one second
to start. Pressing the power/play button
again will stop the metronome.

5. In order to switch back to tuner mode press
the metronome button (M) for 2 seconds.

1. Power/Play Button – Turns power on or off. Starts Metronome.

2. Metronome/Flat Button – Switches between Tuner and Metronome mode. Flats the Tuning note.

3. Display – Shows note, calibration adjustments and tuning meter.

4. Calibration Frequency Indicator – Displays current “A” note calibration.

5. Note Indicator – Displays current note being played.

6. Calibration/Tempo Button – Adjusts tuner calibration or Metronome tempo.

7. Tuning Guide Indicator – Provides visual tuning reference for sharp, flat, and “in tune.”

6

8. Tuning Meter – Shows precise indication of current pitch.

9. Tuner Clip – Attaches tuner to instrument and picks up vibrations from instrument (for tuning).

10. Battery Cover

9

10

SPECIFICATIONS

2

1

3

1. Power/Play Button – Starts Metronome.

2. Meter Display – Moves back and forth
with time.

3. BPM Display – Shows tempo in beats
per minute.

4. DeltaLab Logo – Flashes on and off
with tempo.

4

Indicator: LED Display

Tuning Range: A

(27.5 Hz) - C8 (4186 Hz)

0

Tuning Mode: Vibration

Response Time: <20ms

Precision: +/- 1 cent

Calibration: 415Hz - 466Hz

Power Supply: 3 Volt

(CR2032 Lithium Battery)

Power Consumption: <16mA

Dimensions: 2.44”(62mm) Wide

x 1.3”(33mm) Deep x 1.5”(38mm) High

Weight: .91 oz (26g)