Califone WB80 User Manual
Model WB80
Interactive Whiteboard
User Manual
Model WB80 Interactive
Whiteboard
Thank you for purchasing the Califone® Model WB80 Interactive Whiteboard.
We encourage you to visit our website www.califone.com to register your
product for its warranty coverage, to sign up to receive our
newsletter, download our catalog, and learn more about the complete
line of Califone® audio visual products, including portable and installed
wireless PA systems, multimedia players and recorders, headphones
and headsets, computer peripheral equipment, visual presentation
products and language learning materials.
califone.com
3
1. IMPORTANT SAFETY INSTRUCTIONS
Before using this product, read the instruction manual for important safety
information. Please retain this manual for future reference and warranty
information.
Troubleshooting & Servicing
Do not attempt to service or repair the device yourself. Refer all servicing
to qualied service personnel. Do not attempt to modify the device in any
way. Doing so could invalidate your warranty.
Moisture and heat sources
Do not use this apparatus near water (for example, sinks, baths, pools) or
expose it to rain, moisture, dripping or splashing liquids. Do not expose
the unit to high temperatures, high humidity or direct sunlight.
Cleaning
When cleaning the device, please use a soft, dry cloth. Never use
Benzene, paint-thinner, or other chemicals on the device.
Location
Place the device in stable location, so it will not fall causing damage to
the device or bodily harm.
Intended use
The product may only be used with the original parts intended for it. The
product may only be used in closed and dry rooms. The intended use
includes adherence to the specied installation instructions. The
manufacturer accepts no liability for damage arising due to improper use.
WARNING: Changes or modications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
IMPORTANT
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
The unit’s circuitry may cause interference to nearby radios. To prevent
interference, either switch the unit off or move away from the affected
radio.
NOTE: This equipment has been tested and found to comply within the
limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for
help.
califone.com
4
NOTE: Shielded cables may be required to be used with this unit to ensure compliance with the Class B FCC limits.
califone.com
5
2. PACKAGE CONTENTS
• (1) USB corner sensor piece (R-B)
• (3) Corner sensor pieces (L-B, L-U, R-U)
• (16) Full-length sensor pieces
• (2) Half-length sensor pieces (4 & 4A)
• (1) Male-Male USB extension cord
• (1) Female-Male USB extension cord
• (1) bag of black anodized screws
• (1) bag of black plastic Screw Covers
• (1) bag of silver screws
• (1) Software Installation CD (Draw & Present Software)
• (1) User Manual
Unpacking the Unit
Inspect the unit once the packaging has been opened for any damage
that occurred during shipping and contact us immediately. Please keep
the packing material for further use.
3. TOOLS AND MATERIALS NEEDED
• (1) Phillips screw driver
• (1) Level (3’ preferred)
• (1) Tape measure
• (1) Roll of 1/2” (0.5”) double-sided mounting tape
INSTALLATION LAYOUT
57 689
L-U
R-U
4. SETUP AND INSTALLATION
4.1 HARDWARE INSTALLATION
Unpack box and itemize your contents
4A
3A
2A
1A
L-B
4
3
2
1
Select wall/whiteboard surface to mount WB80. The WB80 requires a 67.75” wide x
5A6A7A8A9A
R-B
6
48.375” wide area. IMPORTANT: The wall must be at to ensure the white board
sensors have line-of-sight to each other. The wall can be slightly concave, but should
not have any large bumps that could disrupt the path between the sensors. Use a level
to ensure there are no such bumps.
Use the tape measure to measure from the oor to the desired
height of the bottom of the WB80. Mark the wall 4 times (1 foot apart).
califone.comcalifone.com
7
Loading...