Califone PA920PS User Manual

PA920PS PowerPro Portable PA
Owner’s Manual
PowerPro™ 920PS Owner’s Manual
Thank you for purchasing this PowerPro PA, the most versatile and appropriate portable PA for use in school, business, houses of worship and government facilities.
We encourage you to visit our website to register your PA for its warranty coverage at califone.com/regis­tration, and while there please signup to receive our enewsletter, and learn more about the complete line of Califone audio visual products including: Portable and installed wireless PA systems, multi-media players & recorders, headphones and headsets, computer peripheral equipment, visual presentation products and lan­guage learning materials.
Unpacking
Check carefully for damage which may have taken place during transit. Report any damage claim directly to the freight carrier immediately. Save product(s) and packaging for inspection by the carrier’s claim agent. Notify your dealer of the pending claim.
Warranty Registration
Please register for your 6-year limited warranty online at www.califone.com/registration to activate.
Service Repairs
Should your unit require repair contact the dealer or Califone Service Department at: (800) 722-0500 to obtain a Return Authorization (RA) number. After receiving the RA from Califone then ship the unit to Califone prepaid, writing the RA visibliby on the outside of the box.
Contents
a) PowerPro PA920PS b) Power Cord c) Operation Manual d) Master Volume Remote Control
Power
On/O
Volume
Down
Remote Control
POWER
-
VOL
MUTE
VOL+
Volume Up
Mute
1
Wireless
UHF receiver
Power switch
with power & battery status LED indicators
AC/DC,
6 hour operation
on one battery
charge and
performs even
while charging
PowerPro™ PA920PS Features
SET/SYNC
RF
AF
CAUTION:
AVIS:
MISE EN GARDE:
AC 100 ~ 240V IN (100W)
47~63Hz 2.7A MAX
CALIFONE INTERNATIONAL INC. califone.com MODEL : PA920PS
p
p
MAXON
PLL 16CH RECEIVER
TO PREVENT ELECTRICAL SHOCK AND RISK OF FIRE, DO NOT
REMOVE UNIT FROM CASE. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICE TO QUALIFIED SERVICE PERSONNEL.
BATTERY MUST BE CHARGED FOR AT LEAST 10 HOURS BEFORE
THE INITIAL OPERATION.
RISQUE DE SHOC ELECTRIQUE NE PAS OUVRIR.
AFIN DE PREVENIR TOUT RISQUE DI’NCENDIE OU SHOCS
ELECTRIQUES, NE PAS EXPOSE CETAPPAREILALA PLUIE OU A UNE
HUMIDETE, EXCESSIVE.
BATTERY STATUS
F
U
S
E
p
POWERFUSE 3A
MUTE
VOL+
MASTER VOLUME
FULLLOW
ON
OFF
E215921
U
L
USC
®
LINE IN
VOL-
MUTE
p
p
TREBLE
BASS
BATTERY SWITCH
SWITCHED R-SPEAKER
OUT OUTEXT-SPEAKER
LO HI
LO HI
230V
Telescoping Handle
Digital Master volume control with LED level indicators
Audio Line In
Bass and Treble Level volume control
Battery Switch
Integral Wheels
Switched/unswitched speaker out
Tripod Mount
Califone® wireless PA systems deliver professional quality sound in a variety of presentation settings. Since they’re simple
to set up and operate, you won’t need an audio expert. Whether it’s a large meeting of parents, an all-school spirit rally or a guest
lecturer transmitting wireless audio from a laptop, you’ll have clear audio so everyone can listen and participate!
2
FOLDER SKIP
POWER
PAIR
BLUETOOTH RECEIVER
MAXON
DOWN/REV UP/CUE PLAY/PAUSE EJECTSTOP
USBREMOTE DISC
TREBLE
LO HI
BASS
LO HI
LINE IN
MIN MAX
DISC/BT
MIN MAX
SPEECH
MUSIC
PUSH
MIC-2 IN MIC-2 IN
MUTE
p
p
MASTER VOLUME
MUTE
VOL-
VOL+
BATTERY SWITCH
ON
MIX R
TRANSMITTER
OUT
LINE
LINE IN
OUT IN
TO PREVENT ELECTRICAL SHOCK AND RISK
OF FIRE, DO NOT REMOVE UNIT FROM CASE.
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICE TO QUALIFIED SERVICE PERSONNEL.
BATTERY MUST BE CHARGED FOR AT LEAST
10 HOURS BEFORE THE INITIAL OPERATION.
RISQUE DE SHOC ELECTRIQUE NE PAS OUVRIR.
AFIN DE PREVENIR TOUT RISQUE DI’NCENDIE
OU SHOCS ELECTRIQUES, NE PAS EXPOSE
CETAPPAREILALA PLUIE OU A UNE HUMIDETE,
EXCESSIVE.
CAUTION:
MISE EN GARDE:
AVIS:
POWER
USBREMOTE DISC
TREBLE
LO HI
MUTE
p
p
MASTER VOLUME
MUTE
VOL-
VOL+
BATTERY SWITCH
ON
MIX R
TRANSMITTER
OUT
LINE
LINE IN
OUT IN
POWER
TREBLE
LO HI
PLL 16CH RECEIVER
p
p
MAXON
MUTE
p
Operation
Battery
Charge the battery for at least 10 hours before the first use of the PA920, or the PA920PS. Simply plug the power cord into an AC outlet and set the battery switch to the ON position. The charging indicator will flash until fully charged, then it will stay green. The unit can be used while it is plugged in for charging.
There are LED indicators above the main power switch to show AC Power and Bat-
BATTERY STATUS
FULLLOW
age, rather than stored with a low battery. This will prolong battery life. Storing more than 30 days without recharging will deteriorate the battery.
Digital Master Volume Control
When the main power switch is turned on, the Digital Master Volume Control is at the lowest level to prevent accidental damage to the amplifier or internal speakers. The volume can be controlled in two ways; using the “Up” “Down” buttons on the mixer panel or using the infrared Master Volume remote control. The Master volume control has 5 green LED indicators to show the Master volume level and a one red LED for speaker mute. When Mute is turned ON the red LED will lit and the green LEDs will turn o. While on Mute, all sound will cut o to the PA920PS speaker and connected speaker. The Master volume remote control must be used in front of the speaker as the sensor is behind the speaker grille.
Recommended Set-up Procedure
Ideally the master volume should be at maximum volume before the wireless receiver volume is adjusted to the desired loudness. Since there are always at least two (2) volume controls to contend with, it is suggested that prior to turning the power on for the receiver, its volume control be set at “10 o’clock”.
tery Status. When the unit is turned on, the one on the left will light “red” when the battery has a low charge. the ones on the right will glow “green” to show partial charge, full charge or if operating on A/C power.
It is recommended that the battery be recharged after several hours of us-
3
MASTER VOLUME
VOL+
p
MUTE
VOL-
Non-powered
Q319
Wireless
Mic
XLR speaker
cable
Companion Speaker
SPEAKER
IN
CALIFONE INTERNATIONAL INC. califone.com MODEL : PA920SP
M319
Wireless
Transmitter
Channel
M-319
Power
PADM515/510
Dynamic
Microphones
On
O
DYNAMIC MICROPHONE
On
O
DYNAMIC MICROPHONE
p
PA920
PowerPro™
2 - 16 Channel Receivers
1 - Transmitter
Bluetooth Media Input
2 - XLR & 1/4” Mic Jacks
CD Player
USB Media Player
p
MIN MAX
H L
p
MIC 2
SPEECH
MUSIC
E215921
U
L
USC
®
p
p
MAXON
PLL 16CH RECEIVER
p
MAXON
LINE IN
MIN MAX
PUSH
MIC-2 IN MIC-2 IN
TO PREVENT ELECTRICAL SHOCK AND RISK
CAUTION:
OF FIRE, DO NOT REMOVE UNIT FROM CASE.
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICE TO QUALIFIED SERVICE PERSONNEL.
BATTERY MUST BE CHARGED FOR AT LEAST
10 HOURS BEFORE THE INITIAL OPERATION.
AVIS:
RISQUE DE SHOC ELECTRIQUE NE PAS OUVRIR.
MISE EN GARDE:
AFIN DE PREVENIR TOUT RISQUE DI’NCENDIE
OU SHOCS ELECTRIQUES, NE PAS EXPOSE
CETAPPAREILALA PLUIE OU A UNE HUMIDETE,
EXCESSIVE.
BATTERY STATUS
F
U
S
E
p
POWERFUSE 3A
MIN MAX
SET/SYNC
p
RF
p
MAXON
AF
PLL 16CH RECEIVER
DOWN/REV UP/CUEPLAY/PAUSE EJECTSTOP
— FOLDER SKIP
USBREMOTE DISC
BLUETOOTH RECEIVER
PAIR
POWER
TREBLE
BASS
DISC/BT
SPEECH
MUSIC
FULLLOW
ON
OFF
LO HI
LO HI
MASTER VOLUME
VOL+
p
MUTE
p
VOL-
MUTE
OUT IN
LINE
LINE IN
TRANSMITTER
OUT
230V
MIX R
BATTERY SWITCH
SWITCHED R-SPEAKER
VOICE PRIORITY
OUT OUTEXT-SPEAKER
SET/SYNC
RF
AF
TRANSMITTER
UHF
MIC 1
MIN MAX
PUSH
MIC-1 IN
CALIFONE INTERNATIONAL INC. califone.com
AC 100 ~ 240V IN (100W)
47~63Hz 2.7A MAX
Connect to
Bluetooth enabled
smartphone
& media players
Q319
Wireless
Mics
USB
Media Player
1/4” speaker cable
4
CD
Player
PowerPro™ Product Family Operation Diagram
The PowerPro™ Series is compatible with other wireless Califone presentation systems providing great flexibility to adjust to any demand. The PA920 connects wirelessly in stereo to the PA920PS or via cable, both systems work with wireless microphones M319 and Q319. The Non-Powered Speaker can be connected to either unit via cable.
Q319
Wireless
Mic
XLR speaker
cable
PA920PS
Powered Speaker
1 - 16 Channel Receiver
1 - XLR Audio Line In
CALIFONE INTERNATIONAL INC.
E215921
califone.com MODEL : PA920PS
U
L
USC
®
MUTE
SET/SYNC
RF
AF
CAUTION:
AVIS:
MISE EN GARDE:
AC 100 ~ 240V IN (100W)
47~63Hz 2.7A MAX
p
p
PLL 16CH RECEIVER
TO PREVENT ELECTRICAL SHOCK AND RISK OF FIRE, DO NOT
REMOVE UNIT FROM CASE. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICE TO QUALIFIED SERVICE PERSONNEL.
BATTERY MUST BE CHARGED FOR AT LEAST 10 HOURS BEFORE
THE INITIAL OPERATION.
RISQUE DE SHOC ELECTRIQUE NE PAS OUVRIR.
AFIN DE PREVENIR TOUT RISQUE DI’NCENDIE OU SHOCS
ELECTRIQUES, NE PAS EXPOSE CETAPPAREILALA PLUIE OU A UNE
HUMIDETE, EXCESSIVE.
F
p
LINE IN
VOL+
VOL-
MUTE
p
MAXON
p
MASTER VOLUME
TREBLE
LO HI
BASS
LO HI
BATTERY STATUS
U
S
E
POWERFUSE 3A
230V
BATTERY SWITCH
FULLLOW
SWITCHED R-SPEAKER
ON
OFF
OUT OUTEXT-SPEAKER
M319
Wireless
Transmitter
Channel
M-319
Power
Non-powered
Companion Speaker
SPEAKER
IN
CALIFONE INTERNATIONAL INC. califone.com MODEL : PA920SP
1/4” speaker cable
5
PLL 16CH RECEIVER
AF
RF
SET/SYNC
p
p
MAXON
Wireless Operation
Radio frequency
successfully matching
to wireles mic
SET/SYNC
SET button -
Syncs wireless
channel with mic
Wireless UHF Receiver
Selecting a Wireless Channel
• Turn the receiver power ON
• Hold down the Set button until the display starts flashing
• Use the UP and Down buttons to select the desired channel
• Depress the Set button to save it.
There are two (2) LEDs on the receiver; RF reception (green) and AF Audio reception (blue). There are also LEDs on the front of the speaker above the grille making it easy to see if the receiver is working properly. A red LED indicates RF (radio frequency) from the transmitter/mic while an amber LED indicates audio. The green LED shows power status for the PA system.
RF
AF
p
PLL 16CH RECEIVER
Wireless mic channel selected
p
MAXON
Audio frequency successfully matching to wireless mic
Channel up /down
Power On/O & volume control
Feedback
Feedback is a shrill screeching sound produced by the speaker system when a microphone is being used too close to the front of the speaker. The microphone picks up the sound of the speaker system and it becomes reamplified. It is a self-sustaining loop which can damage the system if allowed to continue, not to mention the annoyance caused to persons nearby. Always stand 4 to 6 feet from the speaker to minimize the opportunity for feedback from the speaker system.
6
900 MHz Microphone & Beltpack Transmitter
The M319 and Q319 are designed to work with the PA920 series PAs.
M319 Wireless
Belt Pack Transmitter
Hi/Low RF
Power
3.5mm Mic In Jack
Channel Up
Channel
Down
Power
Switch
The M319 is used with these 2 microphones
Volume Control
Power Switch
Channel Up
Q319 Wireless
Microphone
LCD Channel Display
Channel Down
Power Switch
Headset Microphone
HBM319
Electret Lapel Microphone
LM319
7
Powered Companion Speaker PA919PS
The PA920PS works with the M319 and Q319 microphones. The Powered Companion PA has the same
amplifier, power supply and speaker compliment as the full featured PA920. It does not have the mixer
panel because it can be controlled by the PowerPro PA920.
With the integral 16-channel selectable wireless UHF receiver, it can function as a stand alone PA speaker
when using a Q319 Handheld microphone or the M319 Beltpack transmitter with a LM319, or HBM319
microphone. Although there are 5 LEDs on the front of the PA920PS only 3 lights function on this unit
because there is only one receiver. The red LED indicates RF, the amber LED is for audio, and the green
LED indicates power On.
Full Wireless Operation
Any audio from the PA920 can be transmitted to the PA920PS without wiring. There is no limit on the
number of PA920PS speakers that can be used with the PA920 within a range of 300 feet.
Audio Line Buss
When linking one PA920PS to the PowerPro PA920 via Line In, a XLR cable is connected to Audio Line
Out XLR connector on the PA920. The other end is connected to Line In XLR on the Powered Compan-
ion Speaker. The Master Volume Control on the Audio Line panel of the master will adjust the PowerPro
PA920 as well as all the Powered or Passive Companion Speakers, however the loudness needs to be
adjusted via the Master Volume Control on the PA920PS as well.
Tone Controls
The separate base and treble controls provide a wide range of adjustment for increasing or decreasing
either the bass or treble from “flat” frequency response. The center or “12 o’clock” position is flat.
Speaker out
Two 1/4” phone jacks for Switched and unswitched speaker output signals to connect to external speak-
ers. Switched output disengages main speaker, unswitched output divides output between main speaker
and passive speaker
8
PA920PS Specifications
Speaker System
Speaker: Bass reflex design turned to 50 Hz Woofer: 10” Dia., 2” Dia. voice coil, 40 once magnet, moisture resistant cone, 120 Watt capacity. Horn Tweeter: 4.25” square Compression horn driver, 12 once magnet, 1” Dia. voice coil,
30 Watts RMS, 8 ohm.
Amplifier: 90 Watts RMS Sound Pressure Level: 94 dB, 1 Watt@ 1 Meter
Wireless Receiver:
One 16-channel UHF wireless 904-925 MHz, internal antenna, on/o power and volume control, Audio and Radio Frequency receiving LED, 300’ reception range from main unit.
Receiver Sensitivity: -95 dBm
Audio Line In
One Line level XLR jack provided for attaching PA920 speaker via cable.
Mixer Panel
Audio Controls: Separate Treble and Bass controls
Digital Master Volume Control with LED indicators
Mute button
Wireless Master volume adjustment Speaker Out: Switched 1/4” jack disengages main speaker, unswitched 1/4” jack divides power between main speaker and passive companion speakers
Power Sources
Power Supply: 320W single output switching power supply with cooling fan AC Input: Voltage range 85-264VAC
DC Output: 36V/8.8 A Batteries: Two 12 volt (sealed and maintenance-free) lead acid batteries included Charging Time: Full charge in 8-10 hours Operating Time: 6 hours max power output (normal music on full charge)
Battery ON/FF switch Led indicators for AC and Battery status
Dimensions: 22”H x 14”W x 14”D Weight: Actual 47 lbs, shipping 52 lbs. Compliance: FCC, CE, C-UL
9
CAUTION
RISK OF ELECTRIC SHOCK - DO NOT OPEN
DO NOT REMOVE COVER OR BACK. NO USER SERVICEABLE PARTS INSIDE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
REFER SERVICING TO QUALIFIED PERSONNEL.
!
The lightening flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
This product is not designed to function normally in strong electro­magnetic fields. Consequently, the
audio quality may degrade while the product is exposed to strong electromagnetic fields. Normal audio quality operation will be recovered when the strong electromagnetic field is no longer present.
WARNING:
TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, SO
NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
Attention: all safety and operating instructions should be read before operating appliance. All operating and use instructions should be followed when operating the appliance. Heed and adhere to all warnings on the appliance and in the operating instructions. Retain all safety and operating instructions for future reference.
Water & moisture - do not use the appliance near water; ie. Bathtub, washbowl, kitchen sink, laundry tub, wet basement or swimming pool.
Ventilation - do not situate the appliance so that its location or position interferes with its proper ventilation. For example, the ap­pliance should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. The appliance should not be placed in a built-in installation, such as a bookcase or cabinet, that may impede the flow of air through the ventilation openings.
Heat - situate the appliance away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
Power sources - connect the appliance only to a power supply type described in the operating instructions or marked on the appliance.
Grounding or polarization - precautions should be taken so that the grounding or polarization means of the appliance are not defeated.
The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are
!
in the papers with the appliance.
Ce produit n’est pas conçu pour un fonctionnement dans de forts champs électromagnétiques. Par conséquent,
produit est exposé à un fort champ életromagnétique. La qualité sonore redeviendra normale après affaib-lissement du champ électromagnétique.
Power cord protection - power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, conve­nience receptacles, and the point where they exit from the appliance.
Cleaning - the appliance should be cleaned only as recommended by the manufacturer.
Non use periods - unplug the appliance power cord from the outlet when left unused for a long period of time.
Object & liquid entry - care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
Damage requiring service - the appliance should be serviced by qualified service personnel when: (a) the power supply cord or the plug has been damaged (b) objects have fallen or liquid has been spilled into the appliance (c) the appliance has been exposed to rain (d) the appliance does not appear to be operating normally or exhibits a marked change in performance (e) the appliance has been dropped or the enclosure damaged.
Servicing - the user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing refer to a qualified service personnel.
la qualité sonore peut diminuer si ce
Califone® International, LLC
9135 Alabama Avenue, #B, Chatsworth, CA 91311 Tel (818)407-2400 | (800)722-0500 | Fax (818)407-2405 | (877)402-2248 Visit us online at califone.com
Loading...