Calibre UK VGA-10+ User Manual
10-Channel Computer Video Distribution Amplifier
Calibre's 10-Channel RGB Video
Distribution Amplifier, the VGA-10+ is
the ideal means of running up to ten
monitors from a single VGA or other
analogue video source.
The VGA-10+ has the capability of
driving up to ten monitors, it is also
possible for a number of units to be
linked together if more than ten outputs
are required.
Each monitor can be run up to 100
metres away from the VGA-10+.
Calibre offers a full custom cable
manufacturing service using high
quality purpose-designed cabling.
Standard and large screen display
monitors can also be supplied for use
with the VGA-10+.
FEATURES
Run up to ten monitors, up to 1600x1200 resolution.
Can be interlinked for larger installations.
For use in training rooms, at exhibitions,
on display stands and for industrial purposes.
Distance up to 100 metres from the VGA-10+
to each monitor, dependent on resolution.
Cable compensation controls for long runs.
Cables made to customers' own requirements.
Signal switching accessories available for
complete training/industrial systems.
10-Channel Computer Video Distribution Amplifier
APPLICATION OF THE VGA-10+
REMOTE
DISPLAY
PC'S
MONITOR
VGA PC
All connectors are on rear of case.
Includes " Control" input and expansion
output for tutor control of Autoswitch based
classroom system. Turning the ControlSwitch
(available from Calibre) On/Off enables/disables
monitors connected via Calibre's AutoSwitch.
Multiple VGA-10+s can be interlinked for large
installations.
REMOTE REMOTE
DISPLAY
DISPLAY DISPLAY
VGA-10+
INPUT
1m
UP TO
100m
TECHNICAL SPECIFICATION
REMOTE
Video Input
RGB 0.7V 75R, Connector
15W HDD male.
Video Outputs
REMOTE
DISPLAY
RGB 0.7V 75R, Connector
15W HDD female. Ten
amplified outputs. Amplified
signals have 1 HF cable
compensation control per 2
outputs. Bandwidth with cable
REMOTE
DISPLAY
compensation flat 200MHz.
Sync
Separate or composite TTL
syncs, individually buffered.
VGA-10+ will also work with
sync on green. Output syncs
are in same format as input
syncs.
Power Requirements
220/240V AC, 50/60Hz. 110V version available
to order. Power consumption 30W max.
Approximate Size
19" Racking Case, 2U size, Front panel is 482 x
87.5 mm, case is 249mm deep excluding front
panel and connectors. Case is finished in black
epoxy paint.
Calibre UK Ltd
Cornwall House,
Cornwall Terrace,
Bradford, West Yorkshire
BD8 7JS, England
Tel +44 (0)1274 394125
Fax +44 (0)1274 730960
E-mail sales@calibreuk.com
Web-site www.calibreuk.com
Issue 1.8 10 December 2007 E&OE Specifications subject to change without notice. All trademarks acknowledged.
Loading...