CALIBER MCD 893 User Manual

MCD893

Operating Instructions

DVD/VCD/CD/MP3/MP4/USB PLAYER

WITH FM/MW TUNER, BLUETOOTH, AND GPS

NAVIGATION SYSTEM

Safety Precautions

MUTE

OK

Th ank you for purc hasi ng t his pro d uct .
Ple a s e re a d th r o u g h these op e r a ting
instructions so you will know how to operate

your model properly. After you have nished

reading the instructions, keep this manual in
a safe place for future reference.

Onl y conne ct the unit to a 12-volt power
supply with negative grounding.

Never install this unit where the operation &
condition for safety driving is restrained.

Install the product correctly so that the driver
cannot watch any TV/DVD video unless the
vehicle is stopped and the emergency brake
is applied. This will reduce the risk of of

trafc accident caused by distraction by the

driver. Video function is allowed in case of
rear view video camera.

Ne v e r ex p ose t h is u n it, am plif i e r, a n d
speakers to moisture or water for preventing

electric sparks or res.

Please don't change the fuse on the power
cord without professional guidance, using
improper fuse may cause damage to this unit

or even cause re.

Please power off this unit at once and send it
back to the after-sales service center or the
dealer /distributor you purchased from if one
of the following symptoms is found:

(a). No audio output;
(b). No image output;
(c). Water or other obstacle enters the unit;
(d). Smoking;
(e). Peculiar smell.

To ensure safe driving, please adjust the
volume to a safe & comfort level in case of
emergency situations. You should still hear
outside noises while driving.

To provide a clear demonst ration and an
alter na tive for ea sy understa nd ing of the
operation o f this unit, graphic illustra ti on
was used. However, this illustration is not
necessary printed as the actual image found
on the unit.

EN - 1

EN - 2

Safety Precautions

Contents

Warning

Operate the unit correctly according to the
manual instruction to prevent unnecessary
problem.

Caution

This product is a
Use of controls or adjustments or performance
of p ro cedur es othe r than those s pecifie d
here in may res ult in haz ar dous radia tion
exposure . Do not open covers and do not
repair yourself. Refer servicing to qualified
personnel.

CLASS 1 LASER PRODUCT.

Two laser products

Wave length: CD: 780nm DVD: 650nm
La ser powe r: N o h azar dous rad iat i on is
emitted with safety protection.

To reduce the risk of fire electric shock, and
annoying interference, use only the included
components.

Caution of disc using

1. DO NOT use irregular shaped disc.

2. Disc Cleaning. Use a dry, soft cloth to
wipe the disc from center to edge, only neutral
detergent can be used.

Safety Precautions ....................................... 1

Features ....................................................... 3

Panel Controls .............................................. 4

Remote Controls........................................ 5-6

Basic Operations ....................................... 6-7

Disc Operations .......................................7-10

Tuner Operation .................................... 11-12

Bluetooth Operation............................... 12-14

Map Card and USB Operation.................... 15

Other Mode................................................. 15

DVD Setup............................................. 16-17

System Setup ............................................. 18

Device Connections............................... 19-20

Electrical Connections ................................ 21

Installation Guide ........................................ 22

Troubleshooting .......................................... 23

Specications ............................................. 24

3. When playing a new disc. New disc may
have some rough spots around the inner and
outer edges. If such a disc is used, remove
these rough spots with a pencil or ball-point
pen, etc.

EN - 3

Features

DVD-R/RW compatibility

It is possible to playback DVD-R/RW discs
recorded with the video f ormat and Video
Recording format.

Video CDs featuring PBC

compatibility

It is possible to playback Video CDs featuring
PBC (playback control).

WMA and MP3 compatibility

It is possible to playback WMA and MP3 les.

DivX® video compatibility

Refer to DivX compatibility on page90.
Dolby Digital compatibility
Dolby Digital:
“D o l b y ” an d th e do u b l e -D sy m b ol ar e
trademarks of Dolby Laboratories.
Ma n ufa c ture d un d er licen se f rom Dolb y

Laboratories.

About WMA

The Windows Media™ logo printed on the
box indic ates that thi s uni t can p layba ck
WMAdata.
!Windows Media and the Windows logo are
tr ade ma rks or re gis ter ed tra dem ark s o f
Microsoft Corporation in the United States
and/or other countries.
!This unit maynot operate correctly depending

on the application used to encode WMA les.

Button Operation Explanations

Touch panel key operation

It is poss ible to operate this un it by using
touch panel key.

Some frequent operations

1) Move cursor

2) Confirm

Open the SOURCE MENU

Touch the top left corner of TFT screen under
playing mode.

Touch screen

Due to the touch screen, you can fulll most

functions not only by pressing buttons but also
by touching the options you desired.

About MP3

Supply of this product only conveys a license
for private, non-commercial u se and does
not convey a license or imply any right to use
this product in any commercial (i.e.revenue­generating) realtime broadcasting (terrestrial,
sa tellite, cable and/o r a ny other media ),
broad-casting/streaming via internet, intranets
and/or other networks or in other electronic
content distribution systems, such as pay­au dio or a udio -on - dem a nd appl icat ions .
An inde p ende n t l i cens e for such use is
required. For de-tails, please visit http://www.
mp3licensing.com.

EN - 4

Panel Controls

10 11

VIDEO 2 IN (Yellow)

AUX 2 IN-L (White)

AUX 2 IN-R (Red)

12 13 14 15

Press POWER button (7) to turn on/off the unit.

1. - Touch panel

2. - Microphone

3. - Remote sensor

4. - Mute

5. - Select the following sources:
>Radio
>Disc (when disc inserted)
>USB (when USB connected)
>AV1
>AV2 (front AV in)
>Blue-tooth
>Navigation

6. - Navigation

7. - Turn the unit on/off

POWER

Press button (9) to open the panel.

8. - Press to adjust volume level.

9. - Open the panel/Close the panel

- Hold it to access panel menu:
>Open the panel
>Eject the disc
>Close the panel
> Adjust the panel angle (TILT+/-)

10. - Reset

11. - AUX 2 in jack (on the right side

12. - Map card slot (SD/MMC card)

13. - Disc slot

14. - Indicator:
It will light up when you slide the

15. - Eject disc (when disc inserted)

- Reset the mechanism (press 2

of the panel)

panel down.

sec.)

Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a
safety feature to prevent driver distraction. In-dash DVD video functions will only operate when
vehicle is in Park and the parking brake is engaged. It is illegal in most countries for the driver to
view video while the vehicle is in motion.

EN - 5

Remote Controls

Press to turn on/off the unit.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

Remote control operating range

The remot e con tr ol can ope rate withi n a
distance of 3~5m.

1. - Select the following sources:
>Radio
>Disc (when disc inserted)
>USB (when USB connected)
>AV1
>AV2 (front AV in)

>Bluetooth
>Navigation

2. - Disc eject

3. - Menu (DVD)

4. - Title (DVD)

5. - Goto search

6. - Radio band

- Video system PAL/NTSC

7. - Sound/display setting

- Setting menu (press 2 sec.)

8. - System setup

9. - Close the panel step by step

10. - Open the panel step by step

11. - Zoom (DVD/VCD)

12. - Enter

13. - Menu cursor

14. - Stop/Return

15. - Digit area

16. - Enter source menu

17. - Power on/off

18. - Angle (DVD)

19. - DVD subtitle

20. - A-B repeat

21. - Repeat

22. - On screen display

23. - Track random play

24. - Radio tune

- Track skip/seek

25. - Program

26. - Volume

27. - Play/Pause

28. - Mute

29. - DVD audio

- VCD audio L/R/ST

EN - 6

Remote Controls

Basic Operations

Replacing the lithium battery of
remote control unit

When the range of the operation of the card
remote control becomes short or no functions
while operating, replace the battery with a new
lithium battery. Make sure the battery polarity
replacement is correct.

1. Open the back cover of the remote control
unit.

2. Inse rt the b utt on- typ e bat ter y w ith t he
stamped (+) mark facing upward (CR2025
model), paying attention to place the battery
between the two pole metal pin.

3. Close the back cover.

Turn on/off the power

1. Press POWER button to turn on the unit.
The unit goes back to the last status after

power on.

2. When on, press POWER button to turn off
the unit.

Mute

Press to cut the sound.

Note:

• Pressing again or adjusting volume will

release muting.

• MUTE appears on the TFT during muting.

Adjust the volume

Press VOL +/- to increase or decrease the
volume level.
The adjustable range of volume is 0 to 39.

Playing source selection

Method 1:

Press SRC button on the panel o r remote
co ntrol to cy cle t hro ugh a ll the a vai lab le
sources.

Warning

• Store the battery where children cannot

reach. If a child accidentally swallows the
battery, consult a doctor immediately.

• Do not recharge, short, disassemble or
heat the battery or dispose it in a re.

• Do not expose or bring into contact the

battery with other metallic materials. Doing
this may cause the battery to give off heat,

crack or start a re.

When throwing away or saving the battery,

•

wrap it in tape and insulate; otherwise, the
battery may give off heat, crack or start a

re.

Method 2:

Open the 'SOURCE MENU' by touch SRC at
the top left corner of the TFT or press MODE
button on remote control, and then touch the
opt ion you desired or select the option by

moving the cursor and then conrm.

Note:

• When some devices are not ready, they

cannot be selected.

• You should stop switching when the playing

source you desired has been selected and
wait for some seconds, the unit will auto
enter the playing source mode you have

selected.

EN - 7

Basic Operations

Disc Operation

When parking brake applied

1. If 'PRK SW' cable is connected to hand

brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.

2. When the car is m o vin g ahe ad, if t h e

video disc is played, the screen appears
"WAR NIN G! ! E ng age Park ing B rak e to
View Video", and blank screen. The above
wa rni ng scre en wil l pr eve nt the dri ver
watching images. The passengers at the
rear seats can watch normally.

When reverse driving

If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the original work mode after the reverse
driving is done.

Steering Wheel Control

So urc e menu - > S ETT ING me nu ->S WC
Setting menu

1. At SWC menu, use < / > button to select a
function, then press and hold a button on
the steering wheel (if your steering wheel
support the function) until the item on the
screen lighted. Now the function is saved in
the button.

2. Rep eat step 1 to set functions o f other
steering wheel buttons.

3. Exit the setting menu and you can operate

the player by the buttons on the steering
wheel.

4. If you want to change the setting, enter the
SWC setting menu, select a function on
the screen, press and hold a button on the
steering wheel more than 2 seconds, then
the func tion is saved into the button on
steering wheel. At the same time, all other
steering wheel settings are clear, you must
reset them.

Insert a disc

Press on the panel to slide down the panel.
Insert a disc into the slot, and the unit will
change to disc mode automatically.

Note:

• Please check whether there is a disc in

the unit before you insert another one.

• The unit will exit current playing source and

enter DVD mode when one disc is inserted.

• Some r e c orded di scs, su ch as CD -R,

C D - R W, D V D - R, D V D +R , D V D -R W ,
DVD+RW cannot be played back because
of di ff erent recording status. Otherwise,
the discs without being closed could not be
played back.

Eject the disc

Method 1:

Press on the panel to slide down the panel.
Press (EJECT) to eject the disc.

Method 2:

Press on the panel more than 2 seconds
to enter panel menu, and touch EJECT on the
TFT to eject the disc.

Method 3:

Press on the remote control to eject the
disc.

Notes:

• After ejecting the disc, the unit reverts to

SD card mode automat ically if yo u have
inserted one SD card, or the unit reverts to
radio mode.

• You can eject a disc when the unit powered

of f. The un it rem ain s o ff aft er the disc
ejected.

• If t he disc is not remo ve d from the unit

within 10 seconds, the disc will be reloaded
to prevent accidental damage.

Using the touch screen controls

The t o u c h ke y ar e a s fo r CD / V C D / D V D
playback are outlined below:

EN - 8

Disc Operation

A - Turn to main source menu
B - Display on screen control menu

Stop playback temporarily

- D u r i n g pl a yback, pr e s s to pause
playback.

- The sound will be muted.

- Display "PAUSE " in the screen.

Press again to continue playback.
To resume normal play, repeat the

operation.

Disc Playback

1. When disc inserted, display shows READ.
For MP3 or disc with mixed files, reading
time may exceed 1 minute.

2. ERROR will be displayed if error found in
disc operation.

3. For VCD/CD, VCD or CD icon will appear
on the display.

4. While MP3/WMA les playback, MP3/WMA

icon will appear on the display.

5. For D VD , DVD icon will ap pe ar on the
display and TITLE appears. Press to
play.

File type supported

Audio file:
Video file:

MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 /7.0)
MPEG 2 (*.vob)
MPEG 1 (*.dat)

Picture file:
MP3 file:

ISO 9660 or ISO 9660 + Joliet format - Max.
30 characters.
Max. nested directory is 8 levels.
The max. album number is 99.
The max. length of each track is 99 minutes
59 seconds.
Supported sampling frequency for MP3 disc:
8KHz to 48KHz (44.1KHz preferably).
Supported bit-rates of MP3 disc are: 32 - 320
kbps (128 kbps preferably).

MP3(*.mp3), WMA(*.wma)

JPEG (*.jpg)

Disc and le NOT supported

*.AAC, *.DLF, *.M3U, *.PLS, MP3 PRO files

and les with DRM.

Open session discs.

Stop playback entirely

During DVD, VCD, CD, MP3 playback:

1. P r e s s
stopping the pla yb ac k and the relevant
location on the disc is saved, press to
resume the playback from the saved disc
location.

2. Press twice to cease the playback. Press

beginning the Title page of the DVD or the

rst track of VCD / CD.

key on r e m o t e co n t r o l on c e

t o s tar t t he pla yba ck from th e v ery

Select desired track

- Press or to skip to the next track.

- Use 1-9 and 0, 10+ buttons on the remote

control to select desired track number.

Fast forward/bac k w a r d d u r ing
playback

Press or for more than 2 seconds once or
more to select X8 to fast backward or forward
track during playback.

- D u r i n g th e fa s t forward or ba c k w a r d

operation, press

- D u r i n g th e fa s t forward or ba c k w a r d

operation, the volume will be muted.

briey to playback again.

Intro (for CD/VCD only)

You can play the beginning of every track for
15 seconds in sequence.

1. During playback, press

INT ON/OFF will appear on the display.

2. Press

INT

again to select the current track.

INT

once.

EN - 9

Disc Operation

Random track playback (for CD/
VCD/MP3 Only)

You can play all the tracks in random order.

1. During playback, press

- RDM icon will appear on the display.

2. P r e ss
playback.

RDM

ag a in to se l e c t no rm a l

RDM

once or more.

Repeat

During playback, press

- RPT icon will appear on the display.

- For VCD/CD: Display appears RPT ONE
RPT ALL

- For DVD: Display appears RPT CHAPTER

RPT TITLE RPT OFF

- For File disc: Display appears RPT ONE
RPT DIR

Note:

If you do not select RPT on, when the entire
disc or T ITLE pla yback has finis hed , the
system will stop. If no other control, after 5
minutes the unit will turn into standby mode.

RPT OFF

RPT ALL RPT OFF

REPT

once or more.

Repeat A - B

Select desired passage to repeat playback.

- Press REPT A - B once to select starting

point Display shows REPEAT A.

- Press REPT A - B again to select ending

point.

Display shows REPEAT A - B, and selected

passage start to replay.

- Press REPT A - B once again to exit. Display

shows A - B CANCELLED.

GOTO

Go to des ire d t rac k/c hapt er or tim e p oin t
directly.

GOTO

Press
track or DVD Title/Chapter and time display on
top of the screen. Current item is highlighted.
Use / to select desired item. Use digit
button to select number. Press

conrm.

button on the remote control,

ENTER

to

Program

- Press

Fo r DVD and File disc , select titl e and

For VCD and CD, select track number.

- Press to play, or move the cursor to

- If you w ant to delete the l is t, move the

- Press

PROG

/

or / cursor and digit button to enter

number.

chapter number.

select "PLAY" and press

cursor to "CLEAR", press
all the list set before.

to enter program list. Use

ENTER

ENTER

PROG

again to exit program play.

DVD Audio Select

AUDIO

Press
to li s t e n if t h e DV D has mu l t i ple au d i o
languages.

R/L

or

to select audio language

VCD Audio Select

R/L

Press

to select audio channel to listen.

L R Stereo

DVD Subtitle Select

SUBTITLE

Press

language to show if the DVD has m ultiple

language subtitles.

to se l e c t th e su b t itle

DVD Title Select

TITLE

Press

/ or / cursor or digit number to select,

press

to display title or chapter list, use

ENTER

to play.

DVD Angle Select

ANGLE

Press

if the DVD has multiple-angle views.

to select different angle to view

ZOOM

ZOOM

Press

zoomed accordingly.

b u tto n , t h e p i ctu r e wi ll b e

to play.

to delete

EN - 10

Disc Operation

DVD Playback Menu

While playback touch the center of the screen:

Touch the icon to access desired function.

1. Display source menu

3. Stop

4. Track skip/seek
DVD menu left/right

5. Display Select Menu

6. Audio select

7. Subtitle select

8. Play/Pause/Enter

Video CD Playback Menu

While playback touch the center of the screen:

CD Playback Menu

While playback touch the center of the screen:

Touch the icon to access desired function.

1. Display source menu

2. Track intro play

3. Stop

4. Track skip/seek

5. Display select menu

6. Repeat play

7. Random play

8. Play/Pause

MP3/MP4/PHOTO Menu

Touch the icon to access desired function.

1. Display source menu

2. Track intro play

3. Audio select

4. Stop

5. Track skip/seek

6. Display select menu

7. Repeat play

8. Random play

9. Play/Pause

Touch to access desired function.

1. Display source menu

2. Back to upper folder

3. Track up/down

4. Display playback info

5. Stop

6. Track and ID3 display

7. Track skip/seek

8. MP4/MP3/PHOTO select

9. Track select / Folder select

10. Display select menu

11. Repeat play

12. Random play

13. Play/Pause

EN - 11

Tuner Operation

Radio Menu

Touch to access desired function:

1. Display source menu.

2. Select previous/next preset station.

3. Touch to tune automatically.
P r e s s mo re th a n 2 se c onds to tu n e

manually.

4. Touch to select preset station 1-6.

5. Display select menu.

6. Hold it to scan preset stations .

7. Auto search and store stations.

8. Band switch:
FM1-FM2-FM3-MW1-MW2

RDS Basics

RDS service availability varies wi th areas.
Pl eas e und ers tan d i f R DS ser vice is not
available in you area, the following service is
not available.

AF Mode

AF

(Alternative Frequency): When the radio
si gna l st ren gth is poor , e nabl ing the AF
function will allow the unit to automatically
se arc h a not her st ati on wit h t he sam e P I

(program identication) as the current station

but with stronger signal strength.

So urce men u - > SE TTIN G m e nu ->RD S
Setting menu -> AF ON/OFF
AF ON: AF function is activated.
AF OFF: AF function is disabled.
Remark: AF indicator on LCD will flash until
RDS information is received. If RDS service
is not available in your area, turn off the AF
mode.

TA Mode

Some RDS FM stations periodically provide

trafc information.

TP

(Trafc Program Identication)

Broadcasting of trafc information

TA

(Trafc Announcements Identication)

Radio announcements on trafc conditions

So urce men u - > SE TTIN G m e nu ->RD S
Setting menu -> TA ON/OFF.
When TA mode is turned on, the TA indicator
will blink.

When trafc announcement is received, the TA

indicator will display. The unit will temporarily
switch to the tuner mode (regardless of the
current mode) and begin broadcasting the
announcement at TA volume level. After the
traffic announcement is over, it will return to
the previous mode and volume level. When
TA is turned on, SEEK, SCAN, AMS function
can only be received or saved when traffic

program identication (TP) code is received.

TA SEEK/TA ALARM

So urce men u - > SE TTIN G m e nu ->RD S
Setting menu -> TA SEEK/ALARM.

If the TA (Trafc Announcements) is turned on

and there is no traffic program identification

code received in the specied time, no TA/TP

will display and either TA ALARM or TA SEEK
will be activated.
TA ALARM mode: Alarm is turned on.
TA SEEK mode: TA SEEK is automatically
activated.

TA VOL

So urce men u - > SE TTIN G m e nu ->RD S
Setting menu -> TA VOL

RETUNE Mode

So urce men u - > SE TTIN G m e nu ->RD S
Setting menu -> RETUNE L/S
RE TUNE -S or R ETUN E-L is time len gth
selection of TA SEEK retune interval.
RETUNE-S: Short, TA SEEK retune interval is
45 seconds.
RETUNE-L: Long, TA SEEK retune interval is
180 seconds.
REMARK: RETUNE mode functions for TA
during TA SEEK mode only.

EN - 12

Tuner Operation Bluetooth Operation

SRC PA IR SEL

1 234567

8 90+

REG Mode

So urce men u - > SE TTIN G m e nu ->RD S
Setting menu -> REG ON/OFF.
RE G ON: AF f unc tion wil l imp lem ent t he
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG OFF: AF function will ignore the regional
code (of the PI) and stations in t he o th er
regions can also be tuned automatically.

EON (Enhanced Other Networks)

When EO N da t a is re c eived, th e EO N
indicator lights and the TA and AF functions
are enhanced.
TA: Traffic information can be received from
the current station or stations in other network.
AF: The frequency list of preset RDS stations
is updated by EON data. EON enables the
radio to make fuller use of RDS information.
It constantly updates the AF list of preset
stations, including the one that currently tuned
into. If you preset a station around the area at
your home, you will later be able to receive the
same station at an alternative frequency, or
any other station serving the same program,
EON also keeps track of locally available TP
stations for quick reception.

Note:

For your safety, avoid talking on the phone as
much as possible while driving.

Blue tooth i s a wir eless t ransm issio n way
for sho rt dista nce. The b uil t-in Blu etoot h
can connect with the mobile phones having
Bluetooth function.
After connecting, you can control your mobile

phone through the unit.

Pairing

Use this function to establish a connection
between the unit and your mobile phone.

Press the SRC button repeatedly on the panel
or touch BT on the SOURCE menu to enter

BlueTooth mode.

Touch PAIR, then “WAITING FOR PAIRING“
appears on the TFT .

Turn on B luetooth function of your mobile
phone, keep phone within 3 meters to the unit
and start to search for Bluetooth devices.
After the name of the Bluetooth module “SUN­BMA19” appears on the pairing list of your
mobile phone, select it. At this time, a pairing
co de is requ ire d. Ent er the pai rin g c ode
(“1234” by default) and the Bluetooth pairing
wi ll proc ess au tom ati call y. Som e m obi le
phones may instruct you to select connect or
disconnect, please select connecting.
After pairing successfully, the Bluetooth icon
stops to blink, “PAIR OK” will appear on the
screen.

To stop pairing, press PAIR during pairing.

EN - 13

Bluetooth Operation

Exit Pair

After pa i r su c c essfull y , if yo u want to
disconnect, press PAIR button. The TFT of
the unit display “EXIT PAIR”, Bluetooth icon
disappear.

Dial

1. Input dial number by the number button on

the TFT, touch

remote control to dial out.

2. Touch

control to cancel.

or press key on the remote

or press key on the

Receive

1. After pair successfully, if there is a call

in comi ng, the uni t s witc h t o B T mo de

automatically.

2. Touch

control to receive.

3. Touch

control to hang up.

or press key on the remote

or press key on the remote

Voice Transfer

During talking, touch to tr ansfer audio
from the unit to your mobile phone, and touch

again to transfer audio from your mobile

phone to the unit.

Note:

Some mobile phones will transfer audio from
the unit to themselves once the incoming call
is answered.

BT Audio

(if the mobile phone has the A2DP & AVRCP
functions)
After pair s uccessfully, in Bluetooth main
menu, open the audio player of your mobile
ph one a nd set t he trans mis sion mod e to
Bluetooth. At this time, the unit screen will
appear “MUSIC PLAYING”, and the audio will
be transferred from the mobile phone to the
unit. Some mobile phones may hint that to
connect with the unit. After found the Bluetooth
device name “SUN-BMA19” on mobile phone,
you should select to connect it, and then input

the pairing code (“1234” by default). When
music playback, touch to play/pause, and
press / key on the TFT or remote
control to previous/next track (if the options
are available).

History

After pair successfully, touch or press

key on the remote control to dial out the last
dialed number.

BT MENU General Operation

Press the SRC button on the panel or the
touc h key t o ent er SOURCE main menu,
touch SET to enter the unit system setting
menu , the n touch BT t o ent er BT s ettin g
menu.

1. PAIR ON/OFF

Set the automatically pair on or off. If select
ON , the unit will pair au toma t ical l y a n d
“WAITING FOR PAIRING” will appear on the
screen.

2. CONNECT ON/OFF

Set the automatic connection on or off.
When CONNECT ON and Paired OK, if the
distance is over 10 metres, the connection
wil l ex it. T h e Blueto o t h techn o l o gy wi l l
automatically establish a connection between
the unit and the registered mobile phone when
the t ra nsmission distance is 10 metres or
shorter.
When CONNECT OFF and Paired OK, if the
distance is over 10 metres, the connection
will exit. The Bluetooth technology will not
automatically establish a connection between
the unit and the registered mobile phone when
the t ra nsmission distance is 10 metres or
shorter.
Whether the automatic connections is set ON
or OFF, when power is off then on again, the
unit Bluetooth will connect the mobile phone
(if the Bluetooth function turning on) which is
paired OK last time.

EN - 14

Bluetooth Operation

3. ANSWER ON/OFF

Set the automatic answering a call ON/OFF.
When ANSWER ON and Paired OK, if there
is an incoming call, in 15 seconds, the unit
will answer automatically, and voice will be
transferred to the unit too.
When ANSWER OFF and Paired OK, if there
is an incoming call, the unit will not answer
automatically until you choose receiving or
rejecting.

Music Mode

A2DP

A2DP is short for Advanced Audio Distribution
Profile. The mobile phones supporting this
function can transmit stereo audio, whereas
the ones n ot supporting t hi s function can
transmit mono audio only.

AVRCP

AV RCP i s s hor t f or Aud io/Video Remot e

Control Prole. The mobile phones supporting

this functi on can c ontrol the playback of a
Bluetooth audio player.
In the mode of the music player working, if
you want to make a phone call, you can press
the number keys on the mobile phone or on
the remote control, then touch
the same time the music player will stop. The
TFT screen will appear “DIALLING”, after the
call received, the voice will be transferred to
the unit. When the call end, the TFT screen
will appear “MUSIC PLAYING”. Some mobile
pho n e ma y instruc t wh e t her re s u m e to
playback.
If there is an incoming phone call, the music
pl ayer wil l sto p, and t he TFT s cre en will
appear “PHONE NUMBER ANSWER?”. When
the call ends, th e TFT sc re en w il l appe ar
“MUSIC PLAYER”. Some mobile phone may
instruct whether resume to playback.

to dial. At

General Notes for Bluetooth

1. For N7X, N9X, PHILIPS, Sony Ericssion,
SAMSUNG mobile phones, during our test,
after the mobile phones appear connection
successful, the unit still appear waiting for

pairing. At this time you must nd the unit’s

Bluetooth module name “SUN-BMA19” on
the pairing list on your mobile phone and
select connecting in the submenu, then the
unit will appear pair OK. Otherwise, there is
no voice coming out when communicating,
th ough the mob ile phon e h a s a lrea dy
displayed pair OK. Some mobile phones,
such as PHILIPS, when it playbacks A2DP,

you must nd the unit “SUN-BMA19” in the
phone’s menu and reconnect (check your

mobile phone whether has the A2DP &
AVRCP functions).

2. When pairing, some types of mobile phone
hint that how to operate, for example, when
you make a phone call by the unit, if the

mobile phone voice dosn’t be transferred

to th e un i t , no vo ice co m es o u t . Th e
SAMSUNG mobile phone hints that voice
should be transferred to Bluetooth device.

3. Depending on the mobile phone, if private
mode is selected, when you make a phone
call by the unit, or receive, the voice would
be transferred to the mobile phone. But
sometime the Bluetooth maybe disconnect
till the communication ends, then connects
your mobile phone to the unit automatically.
Some mob ile phones maybe nee d pair
again.

4. For mobil e phone, the Bluetooth device
n a m e mu s t be pr im a ry s y m bo l s o r
numbers. Otherwise, some unpredictable
issues m ay occur during the Bluetoo th
devices connecting and making phone call.

5. After paired O K, if no sound pr od uced,
please check whether the Bluetooth stereo
audio on the phone switched ON.

EN - 15

Map Card and USB Operation Other Mode

GPS Antenna,
signal receiving side up

GPS Antenna,
signal receiving side up

GPS Antenna,
signal receiving side up

Using Map Card (SD/MMC Card)

1. T o ope n the pa nel fi rst, press the
button on the panel. Insert a map card into
the corresponding slot, the unit will load
the map and s witch to navigation mode
automatically, then navigating by the touch
screen.

2. To remove the card, you should rst select

another source, in order to avoid damaging
the card, then slide down the panel, press
the card slightly, and take off the card after
it popped out.

Note: You can c ontro l the pane l usi ng

the touch panel control, refer to previous
section: “Panel Control”.

* The panel cannot close if the map card was

not fully inserted or did not remove after
popped it up.

Using USB device

1. Connect your USB device to the USB cable
which you placed in the dashboard or glove
box during installation of the car radio.

When connecting a USB device, the unit

will read the les automatically.

2. To remove t he USB device, you should

rst select another source, in order to avoid

damaging the USB device.

AV IN mode

External peripheral devices with RCA audio
and video outputs can be connected with the
unit.
For more details, please refer to < Electrical
Connections>.

NAV mode

Navigation system can be supported by the
MAP card connected with the unit.
For more details, please refer to <Navigation
Operation>.

GPS Antenna Installation Guide

You can mount the GPS antenna in the car or
out of the car.

• Fix the GPS antenna to a suitable position

on the dashboard behind the windscreen,
and ensure no obstacles to receive GPS
signals. When the satellites determine your
position, the navigation system can supply
instruct io n information . At the time the
satellit es do not determine your position
completely, the navigation system can not
supply instruction.

USB Notes

USB functions (ash memory type) MP3 music play

1. USB ash memory 2 in 1 support

2. Fat 12/fat 16/fat 32 is possible

- Fat 12/16 (dir: 200 support, le: 500 support)

- Fat 32 (dir: 200 support, le: 500 support)

3. File name: 32 byte/dir name: 32 byte /tag name:
32 byte

4. Tag (ID3 tag ver 2.0)

- Title/artist/album: 32 byte support

5. USB 1.1/2.0 support

(It can not support USB 2.0 speed. Just, get the

same speed with USB 1.1)

Not all kinds of USB devices are compatible with

the unit.

• Place the GPS antenna on the top of the

car outside, no obstacles on the receiving
direction.

EN - 16

DVD Setup

SETUP

Press
screen.
Use to select setup items:
SYSTEM - LANGUAGE - AUDIO - VIDEO

SYSTEM

TV System:

PAL/NTSC/AUTO

Select the output video format in the setting
menu.

to display setup menu on the

If you forget the password, please

enter 0000 to reset a new password.

Setting Rating:

1 KID SAFE / 2 G / 3 PG / 4 PG13 / 5 PG-R /
6 R / 7 NC-17 / 8 ADULT

The rating of the disc is from 1 to 8:
(1) with the most limits when playing.
(8) with the least limits when playing.
Original setting: 8

Note:
The rating can be selected on ly under the
password unlocked status, and the limits can
be worked only under the password locked
status.

Load Default:

RESTORE

If this item is selected, the unit will return to
original setting.

Screen Saver:

ON/OFF

The screen saver appears if disc stop last
more than 3 minutes. Original setting: ON.

Video Output Mode:

S-VIDEO

Setting TV type:

4:3PS/4:3LB/16:9

Select TV type to watch wide screen movies.
4:3 Pan Scan: For 4:3 TV, left and right edges
will be cut.
4:3 Le tter Box: For 4:3 TV, black bars will
appear on top and bottom.
16:9: For 16:9 wide screen TV.

Password:

1. Press number button " 0000 " on the remote

control, then press the ENTER button to

conrm.

2. Press the desired 4-digit password, and

then press ENTER button to conrm.

3. Record the password and keep it in a safe

place for future reference.

LANGUAGE

OSD Language

Select one language that you are familiar with
to display system menu.

Audio Language

Select one dialogue language that you are
familiar with when playing back DVD discs.

Note:

If the DVD disc has th e aud io fil e i n t he
selected language, the dialogues you listened

EN - 17

DVD Setup

to will be in the selected language.

If the DVD disc does not contain the audio le

in the selected language, the dialogues you
listened to will be in the default language.
You can change the language by pressing
[AUDIO] key of the remote controller.

Subtitle Language

Select one language that you are familiar with
to display DVD subtitles.

If the DVD disc h as the subtitl e file in the
select e d la n g u a g e , th e su b t i t le will be
displayed in the selected language.
If the DVD disc does not contain the subtitle

le in the selected language, the subtitle will

be displayed in the default language.
You can change the language by pressing
[Subtitle] key of the remote controller.

Menu Language

Select one language that you are familiar with
to display DVD menu.

Note:

If the DVD disc has the selected language, the
DVD MENU / TITLE will be displayed in the
selected language.
If the DVD disc does not contain the selected
lang uage, t he DVD MENU/ T ITLE will be
displayed in the default language.

VIDEO

BRIGHTNESS

Set the brightness of the video output with .

CONTRAST

Set the contrast of the video output with .

HUE

Set the hue of the video output with .

SATURATION

Set the saturation of the video output with .

SHARPNESS

Set the sharpness of the video output with .

AUDIO

KEY

Setup the tonality with the buttons.

EN - 18

System Setup

Sound Effect & TFT Setup

Touch SEL on the TFT, or press SEL button on the remote control to enter SELECT menu.
Touch the TFT or use remote control to adjust Audio/Video settings:
Audio: EQ sound effect(Flat-Pop-Rock-Clas.-OFF)/BASS/TREBLE/BALANCE/FADER
Video: BRIGHTNESS/CONTRAST/COLOR/DIM

SETUP Menu

Source menu -> Setting menu -> Setup menu

Touch the adjust icon on left or right to select.
Touch the up/down icon to access next/previous
list.

1. Display Source Menu

2. List up/down

3. Adjust

LOUD ON/OFF: P re s s

loudness on/off.

BEEP ON/OFF: Press / to turn button

beep sound on/off.

12/24 HOURS: Press / to select 12

hours or 24 hours mode.

/AM/PM: Press to set hours and press to set minutes.

VOL LAST/ADJUST: Press

level of latest power off.

Press / to choose VOL ADJUST, then set the turn-on volume level by

the next option.
A VOL: Press
MIRROR ON/OFF: Press / to turn mirror mode on or off. While enter MIRROR IMAGE ON

mode, the video of camera is mirror image.
PARKING ON: If you connect the PARKING brake wire to your hand brake contact, when

play video disc, the screen will be blank screen.
SUBW ON/OFF: Press / to turn subwoofer on/off.
SUB VOL: Press / to adjust subwoofer volume when SUB ON mode is active.

/ to turn

/ to choose VOL LAST, the turn-on volume level is the volume

/ to adjust volume level when VOL ADJ mode is active.

EN - 19

Device Connections

Notes of connection

• Thi s uni t is des i gned to be u s ed in a

vehicle with a 12-volt battery and negative
grounding. Before installing this unit to a
recreational vehicle, a bus, or a truck, make
sure the battery voltage is appropriate for
this unit to be used, otherwise, install a
transformer by professional to convert the
output voltage to 12V.

• To avo id shor t c irc uit in the el ect rica l

system, ensure that the negative battery
cable is disconnected before installation.

• To prevent short circuit in the wiring and

damaging to this unit, secure all wirings
with cable clamp or adhesive tape. Route
the wiri ngs in a sec ured, out of heating
place without touching any moving parts
such as gear shift, handbrake, and seat
rails to prevent the wiring insulation being
melted / wore off.

• Never pass the yellow power cord through

th e in stal l a t ion h o l e int o the en g ine
com p a r t ment an d co nnect to the car
battery. Other wise, a h igh possibi lity of
serious short circuit to the electrical system
may be occurred.

please don't connect P.CONT lead to the

power lead of the external power amplier,

otherwise, electric spark or other damage
may be resulted.

• Never ground the speaker output to prevent
the damage to the built-in power amplier.

• The min i m u m rating o f th e speake r s
connected to this unit is 50W with 4 to 8Ω

impedance.

• Replacing a new fuse with 15A rating when

the old one is broken, using no fuse or fuse
with improper rating may cause damage

to this unit or even res. If a proper fuse is

installed and electrical problems still occur,
please contact with any professional car
shops for inquiry.

• DO NOT connect other equipments with

the car battery to avoid battery overheating.

• Please make sure all the wiring connections

& the cables of the Speakers are well­in sulat ed. O the rwise , t his u nit m ay be
damaged by short circuit.

• If there is no ACC available, please connect

ACC lead to the power supply with a switch.

• If an external power amplier is connected,

EN - 20

Device Connections

Key A: Connect to steering
wheel control cable

Key A

SWC

Key B (standby)

Key B

GND

GND

Parking Brake Cable Connections

Reverse Driving Cable Connections

Steering Wheel Control Cable Connections

EN - 21

Electrical Connections

GPS Antenna

Radio Antenna in

ISO Connector

Fuse 15A

USB SLOT

VIDEO 1 IN(Yellow)

CAMERA IN (Yellow)
VIDEO OUT 2 (Yellow)

REAR AUDIO OUT-R (Red)

REAR AUDIO OUT-L (White)

FRONT AUDIO OUT-R (Red)

FRONT AUDIO OUT-L (White)

AUX 1 IN-L (White)

AUX 1 IN-R (Red)

SWC (Steering Wheel Control)

VIDEO OUT 1 (Yellow)

CAMERA (Pink) +

PARKING (Green) -

SUB.W (Brown)

Wiring Diagram

EN - 22

Installation Guide

1. If relevant, remove any other audio system from the car.

2. After unscrewing the four car radio attachment screws, insert the mounting sleeve into the

dashboard. Fix it rmly in place by folding down the metal tabs.

3. If this has not already been done, attach the brackets (2x) to the car radio.

In order to do this, use the supplied at head screws (M5x6mm).

4. Perform the required electrical connections:

- If necessary, connect the PARKING brake wire to your hand brake contact in order to activate
the video display when playing a DVD (when the car is parked).

- Connect the wire that activates the reversing camera to the reversing sensor or to a reversing

light. If necessary, connect your reversing camera to the car radio’s reversing camera input

using a video cable (not supplied).

- Ensure that you now place the USB cable located at the back of the unit in such a way that it
comes out of the dashboard or the glove box.

5. Then check that everything works before installing the main unit in the mounting sleeve.

Note: if necessary, use the mounting screws and bolt rubber to complete installation of the unit.

Install the car radio in the dashboard using the supplied at head screws (M2.6x5mm).

6. Turn on the unit and slide down the panel, then attach the outer trim frame.

If you are not sure how to install this unit correctly, contact a qualied technician.

EN - 23

Troubleshooting

The following checklist can help you solve the problems which you may encounter when using the
unit. Before consulting it, check the connections and follow the instructions in the user manual.

Problem Possible cause Solution
General

The unit will not switch on.

No sound

The unit or screen does
not function normally.

DVD mode

The appliance will not play
discs.

S o u n d s k ip s d u e t o
vibration.

TUNER mode

Unable to receive stations.

Poor quality reception of
radio station.

Preset stations are lost.

USB/SD/MMC mode

Una b l e to in s e r t USB
device or SD/MMC card.

The USB device or SD/
M M C c a r d can n o t be
read.

The remote control is not
working or does not work
properly

Car ignition is not on.
C a b l e i s n o t p r o p e r l y
connected.
Fuse is burnt.

Volume is set at minimum or
the mute function is on.

The unit system is unstable. Press the RESET button.

The disc is inserted incorrectly.
The disc is dirty or damaged.

Mounting angle is over 30˚.

Mounting is unstable.

The antenna is not connected
properly.

T h e a n t e nn a i s n o t f u l ly
extended or it is broken.

T h e b a t t e r y c a b l e i s n o t
properly connected.

The memor y ca r d or US B
device has been inserted the
wrong way round.

NTFS format is not supported.

The SD/MMC card is not map
card.

The batteries are low or empty. Change the batteries.

Turn your car key in the ignition.
Check cable connection.
Replace fuse with a new fuse of the
same capacity.

Check the volume or switch the mute
function off.

Disc must be inserted with the label
side fa ci ng up. Clean th e disc and
check for damage. Try another disc.

Adjust mounting angle to less than 30˚.

Mo u n t the un it se c u rely wi t h th e
supplied parts.

Connect the antenna properly.

Fully exte n d th e an t e n n a an d if
broken, replace it with a new one.

Connect the permanent live on the unit
to the permanent live on the vehicle.

Insert it the other way around.

Check that the USB disk file system
is in FAT or F AT 32 format. Due to
different formats, some models of USB
storage devices or MP3 players may
not be read.

Using a map card.

Specications

General

Power supply 12V DC (11V-16V)
Test voltage 14.4V,

Maximum power output 45Wx4 channels
Continuous power output 30Wx4 channels (4

Suitable speaker impedance 4-8 ohm
Pre-Amp output voltage 2.0V (CD play mode:

Fuse 15A
Dimensions (WxHxD)

- Chassis 178x100x164mm

- Nose 170x105x21

Weight 3.0kg
Aux-in level
Sub-woofer out 4.0V

negative ground

10% T.H.D.)

1KHz, 0 dB, 10K
load)

300mV

Disc Player

System D i sc di g i tal au d io

Frequency response 20Hz - 20KHz
Signal/noise ratio >80dB
Total harmonic distortion L e s s tha n 0 . 2 0 %

Channel separation >60dB
Video signal output NTSC/PAL
Video output level 1±0.2V
Video signal input NTSC/PAL

system

(1KHz)

AM(MW) Radio

Frequency range 522- 1 620 K Hz

530- 1 710 K Hz

Usable sensitivity 30dBμ

(Europe)

(USA)

Components

Machine screws M5x6 mm 4
M2.6x5mm 4
Mounting bolt (50 mm) 1
Wire connector 2
Trim plate 1
Operating Instructions 1
Rubber cushion 1
Remote control 1
AV cable 1
Map card 1
GPS antenna 1

Note: Specifications and the design are
subj ec t to change without not ice due t o
improvements in technology.

7 INCH TFT LCD

Display resolution (dot) 1440(W) x 234(H)
Active area (mm) 154.08 x 86.58
Screen size (inch) 7.0 (Diagonal)
Dot pitch (mm) 0.107×0.370
Contrast ratio 300
Brightness 350 nits

FM Stereo Radio

Frequency range 8 7 . 5 - 1 0 8 . 0 M H z

8 7 . 5 - 1 0 7 . 9 M H z

Usable sensitivity 8dBμ
Frequency response 30Hz-15KHz
Stereo separation 30dB (1KHz)
Image response ratio 50dB
IF response ratio 70dB
Signal/noise ratio >55dB

(Europe)

(USA)

EN - 24

CLASS 1

LASER PRODUCT