Caliber MCD265 User Manual
AUX
MCD265
INSTRUCTION MANUAL
Car Stereo CD/CDR/CDRW/MP3/WMA Player
with PLL FM Stereo Radio
Radio Data System with PTY
USB Port and SD/MMC Card Input
Front AUX In
Flip Down and Detachable Front Panel System
LOCATION OF PARTS AND CONTROLS
141 5 15 16 267 6
12 9 10 13 19 20 21 22 23 24 27 25118
2 3
(1-6)
4
18 17
1. POWER ON/OFF ( )
2. FUNCTION SELECT BUTTON: BASS/TREBLE/BALANCE/FADER / TA SEEK/MASK
DPI/RETUNE/AUDIO DSP/LOUDNESS/CD MULTI/BEEP/SEEK/STEREO/LOCAL
3. VOL UP/VOL DOWN FOR BASS/TREBLE/BALANCE/FADER
4. PRESET STATIONS (1,2,3,4,5,6)
5. ‘AF’ FUNCTION (ALTERNATIVE FREQUENCIES)
6. ‘TA’ FUNCTION (TRAFFIC ANNOUNCEMENT)
7. ‘PTY’ FUNCTION (PROGRAM TYPE)
8. DISPLAY BUTTON (DISP)
9. MODE BUTTON (MODE)
10. BAND BUTTON (BAND)
11. AUTOMATIC OR MANUAL TUNING
(FREQ UP OR FREQ DOWN /CD TRACK/SEARCH BUTTON
12. AUTO SEEK SEARCH TUNING (A/PS)
13. ‘SCAN’ AUTOMATIC TUNING CONTROL (SCAN)
14. MUTE BUTTON (MUT)
15. LCD DISPLAY
16. PANEL RELEASE BUTTON ( )
17. CD SLOT
18. CD EJECT BUTTON ( )
19. PAUSE BUTTON
20. INTRO BUTTON (Preview all Tracks)
21. REPEAT BUTTON
22. RANDOM BUTTON
23, 24. + 10 TRACK SEARCH DOWN/UP
25. USB PORT
26. MULTI-MEDIA CARD (MMC) / SD CARD SLOT
27. FRONT AUX IN
EN-2
B
A
1 3 5 7
5
2 4 6 8
7
4 8
53mm
182mm
3
2
182mm
53mm
1
2
1
3
4
ISO CONNECTOR
RCA Jack Line Out:
Red (right) White (left)
ANTENNA
CONNECTOR A
4. MEMORY +12V
5. AUTO ANTENNA OUTPUT
7. +12V (TO IGNITION KEY)
8. GROUND
Note: (connector A no. 7) wire must be connected by car ignition key in order to avoid that car battery
becomes weak when the car will be not used for long period.
CONNECTOR B
1. REAR RIGHT SPEAKER (+)
2. REAR RIGHT SPEAKER (-)
3. FRONT RIGHT SPEAKER (+)
4. FRONT RIGHT SPEAKER (-)
5. FRONT LEFT SPEAKER (+)
6. FRONT LEFT SPEAKER (-)
7. REAR LEFT SPEAKER (+)
8. REAR LEFT SPEAKER (-)
Maintenance
FUSE REPLACEMENT
If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after the
replacement, there may be an internal malfunction. In this case, consult your nearest repairing center
Warning
Use the specied amperage fuse for each lead. Use of a higher amperage fuse may cause serious
damage.
CONNECTOR
LINE OUT
L (WHITE) R(RED)
ISO CONNECTOR
INSTALLATION
PRECAUTIONS
• Choose the mounting location carefully so that the unit will not interfere with the normal driving functions
of the driver.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight
or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration.
• Use only the supplied mounting hardware for a safe and secure installation.
• Be sure to remove the front panel before installing the unit.
NOTE : Inclination angle for car radio installation must not
exceed 30˚ otherwise the front panel will not open.
release screw and
bracket
Bend these
claws, if necessay
Note: Keep the release key in the safe place as you may need it in future to remove the unit from the car.
EN-3
Loading...