Apple, Apple Logo, Mac, the Mac logo and Macintosh are trademarks of Apple Inc.
Microsoft, Windows and Windows Logos are registered trademarks of the Microsoft Corporation.
All other trademarks are the property of their respective owners.
*Specications and package contents are subject to change without notice.
Contents
Introduction
General Use Warnings
Safety Warnings
Tech Specs
Package Contents
CalDigit VR2 Overview
CalDigit VR2 Front Panel
CalDigit VR2 Rear Panel
Installing the CalDigit VR2
LCD Menu Overview
LCD Display Information
CalDigit VR2 LCD Menu Tree Overview
RAID Tool Feature Overview
Conguring your RAID
Using the LCD Menu
Using RAID Tool
Accessories and Parts
Technical Support & Warranty Information
Technical Support
CalDigit Warranty Information
4
5
5
6
7
8
8
8
9
10
10
12
13
15
15
17
19
20
20
20
03
Introduction
Thank you for choosing the CalDigit VR2. The CalDigit VR2 is the most complete two drive
RAID system on the market today. It oers unmatched performance, impressive connectivity
and superior quality all in a sleek and easily upgradeable enclosure that is both portable
and functional.
Please use the following quick installation instructions to setup your CalDigit VR2.
Note: Please only use the CalDigit VR2 in places with cool and natural
ventilation. Please do not use the CalDigit VR2 under extremely hot or
cold environments to avoid possible data damage that can be caused by
extreme temperatures.
04
General Use Warnings
Please read the CalDigit VR2 manual thoroughly and become familiar with the product
before use.
Only use the CalDigit VR2 in an area with cool ventilation. Make sure that the fan is
not obstructed to ensure heat dissipation. Do not leave or use the VR2 near a heat
source such as a heater or direct sunlight.
Avoid using the VR2 in extremely hot and cold environments as it will increase the
likelihood of premature drive failure. A safe temperature range is between 40F – 95F.
Avoid using the VR2 in humid environments. Moisture and condensation can accumulate
in the drive and damage the electrical components, resulting in unit failure
and catastrophic data loss.
Only use the power adapter that has been supplied with the VR2 Drive. An excessive or
inadequate power supply can result in unstable performance or drive failure.
Make sure to transport your VR2 with care. Hard drives are sensitive to shock and
rough handling can result in degrading performance or disk failure.
Safety Warnings
Keep the VR2 away from liquids and moisture. Direct application of liquids on the VR2 can
result in electric shock, re hazard and damage the unit. If your VR2 gets wet while it is still
o, do not turn it on.
Do not tamper with or try to repair the VR2 unless you are a certied CalDigit technician.
Doing so can result in personal injury and damage the VR2. This will also void your
warranty. If you have any issues, contact CalDigit Technical Support.
1x SuperSpeed USB 3.0 Port up to 5Gbps
1x eSATA Port up to 3Gbps
2x FireWire 800 (IEEE 1394b) Ports up to 800Mbps
1x FireWire 400 (IEEE 1394a) Port up to 400Mbps
RAID Function:
Supports RAID 0, 1, Spanning, JBOD*
Automatic online fast disk rebuilding
Automatic disk failure detection
Hot swappable disks
*USB 3.0 & eSATA do not support JBOD
System Requirements:
Windows 2000, XP, Vista, 7 or later
Mac OS 10.4 or later
USB 3.0
Windows XP or later, Mac OS 10.5 or later
Notes:
Downloadable versions of the user manual & drivers are available on the CalDigit support page.
http://www.caldigit.com/support.asp
Burst transfer rates will vary from one computer to another. Depending on the host conguration, average speeds are usually lower.
Weight varies by conguration and manufacturing process.
IMPORTANT: Use of this product is subject to acceptance of the software license agreements included. Product contains electronic documentation.
1TB (Terabyte) = 1000GB. 1GB = 1,000,000,000 bytes. Total accessible capacity varies depending upon operating environment (typically 5-10% less).