CalDigit S2VR HD User Manual
S
2VR HD
5 Bay SATA 3Gb RAID Solution
Performance, Protected, JBOD
User Manual
CalDigit, Inc. 1941 Miraloma Ave, Unit B Placentia, CA 92870 USA
www.caldigit.com
The information of the products in this manual is subjected to change without prior notice and does not represent a
commitment on the part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual.
This manual may not be reproduced in whole or in part without the written consent of CalDigit Inc.
Copyright © 2006, CalDigit, Inc. All rights reserved
S2VR Duo S2VR HD, S2VR Pro, CalDigit name and logo are registered trademarks of CalDigit Inc.
All other trademarks are the property of their respective holders.
Rev 1.071306
Table of Contents
Introduction ………………………………………………………………………………………………. 2
Features and benefits of the S2VR HD ………………………………………………………………… 2
Specifications …………………………………………………..…………………………………………. 2
Firmware Update …………………………………………………………………………………….………… 2
Opening the Box ……………………………………………………………………………………….……… 3
Package Contents ……………………………………………………………… ………………….…….. 3
Front Panel LED Indicators ………………………………………………………………………..……. 3
Back Panel View of S2VR HD ……………………………………………………………………….….. 3
Hardware Requirements ………………………………………………………………………………….….. 4
FASTA-4e or FASTA-4x HBA Controller Cards ………………………………………………………..…. 4-6
Installing the Host Controller Card …………………………………………………………… ……… 4
Installing the Host Controller Card, Driver Installation ……………………………………………. 4
Verify System Profiler ……………………………………………………………………………………….... 6
Install S2VR Manager ………………………………………………………………………………………… 7
Installing the Hard Drive Tray Modules ……………………………………………………………………. 9
Connecting the S2VR to the HBA Controller ……………………………………………………………... 9
Power S2VR HD ON/OFF …………………………………………………………………………………...… 9
Open S2VR Manager ………………………………………………………………………………………….. 9
Setup Password, e-mail & voice alert...…………………………………………………………………….. 10
Configure RAID Level …………………………………………………………………………… ……………. 11
Basic RAID Configuration………………………………………………………………………………… 11
Advanced RAID Configuration ………………………………………………………………………… 13
Turbo Feature ..…………………………………………………………………………………… ………. 14
JBOD Mode ……………………………………………………………………………………… ………… 15
JBOD to Performance Mode …………..………………………………………………………………... 20
JBOD to Protected Mode ………………………………………………………………………………… 22
Protected Mode rebuild information ……………………………………….,…………………………….. 25
Demonstration of HDD Failure …………………………………………………………………… ……. 26
Troubleshooting ……………………………………………………………………………………………….. 27
General Safety Precautions ………………………………………………………… ……………………….. 27
Agency Approvals ……………………………………………………………………………………………… 27
Technical Support ……………………………………………………………………………………………… 27
Serviceability ……………………………………………………………………………………………………. 28
Glossary …………………………………………………………………………………………………………. 28
1
Introduction
Thank you for purchasing your CalDigit S2VR HD. CalDigit was established in North Orange County,
California, with a team of world class software and hardware engineers and support personnel.
This team working in close conjunction, developed an unparallel hardware product line in the S2VR series
SATA 3Gb/s RAID solution. CalDigit engineers emphasize the use of quality components to produce products
that would both lessen the chances of component failure, and loss of productivity.
The S2VR HD has 5 removable hard drive trays and can be configured for Performance, Prot ected RAID
and JBOD modes. JBOD and striped (the fastest mode), is what the S2VR comes pre-configured with,
JBOD and striped meets the demands of 1080 29.97fps 10 bit uncompressed HD users. In protected mode, the
S2VR allows for quality performance DV, DVCAM, HDV, DVC Pro HD, and SD. In performance mode,
the S2VR delivers high speed performance for use with Photoshop, or desktop p ublishing applications.
Important Info:
Please read this manual thoroughly as it is an important part of the complete S2VR HD package.
Neglecting to read through this manual and follow the directions herein could possibly result in
your S2VR HD operating abnormally, and out of the specification of the performance for which
it was designed. Please pay special care to note any WARNING notations or RED typeface indicators.
Features and benefits of the S2VR HD:
• SATA 3Gb/s Interface
• I/F Bandwidth 3Gigabytes per second
• Modular Design
• Hot Swappable HDD and Power Supply
• JBOD pre-configured, can also be set for Performance or Protected modes
• Hot Spare Drive function in Protected mode
• Easy RAID Configuration
• SuperLane Technology, simplifies your cabling
• Password Protection
• E-mail and Voice notification
• Temperature and Power Warning
• Supports 10 bit Uncompressed HD 1080/60i
• 3 Year Limited Warranty
Important Info: Any loss, corruption or destruction of data while using a CalDigit solution is the sole
responsibility of the user, and under no circumstances will CalDigit be held liable for the recovery or
restoration of this data. To help prevent the loss of your data, we highly recommend that you keep TWO
copies of your data; one copy on your S2VR HD, and a second copy on another S2VR HD unit, for
instance.
Specifications:
Physical Dimensions: 26.30" L X 15" W X 23.25" H / 263.29mm L X 150mm W X 232.50mm H
Power: Auto switching 100-240 VAC 47-63 Hz with PFC
Inrush current 65/130A @ 11/220VAC (at 25° ambient cold start)
Operating temperature: 0-40 degrees C or 32° to 104°F
Weight (net): 20.45lb / 9.28kg
Firmware Update
Firmware updates are made available to maintain compatibility with the latest software releases or
correct problems with previous versions. If you are experiencing problems with any CalDigit product,
visit our website at www.caldigit.com
for your particular product.
to check for any available firmware updates and download them
2
Opening the Box
Remove all components from the shipping container. Retain all boxes and packaging materials,
in the event that you have to return the product to the manufacturer. Examine the package contents
for any shipping damage. Contact the freight carrier immediately should damage exist.
Important Reminder: Please keep carton, all contents & packing materials in case you need to return unit.
Package Contents
• S2VR HD
• 5 Hard drive in tray module
• FASTA-4e HBA or FASTA-4x HBA depending on model. (Host Card)
• e-SATA cable
• Quick Installation shee t
• Driver CD & Manual
• Power Cord
Front Panel LED Indicators
Note: During Performance operations, it is normal that one or more blue LEDs on the front panel of the S2VR will
blink intermittently, or turn off altogether, (generally for only a few minutes at most), during the read/write process.
Please don’t confuse this normal LED operation as an indicator that the drive is bad or failing, as this is not the
case.
Back Panel View S2VR HD
3
Hardware Requirements
• PC or Mac with an available PCI-e or PCI-x slot 500 Mhz or faster**
• CD-ROM drive
• 1GB of RAM minimum
**Note: You may be able to install the S2VR solution into an older Mac or PC, however your overall
performance will be slower than with newer systems. For uncompressed HD video editing, we recommend a Dual
G5 or newer CPU with1GB machine or better.
Installing the Host Controller Card FASTA-4e or FASTA-4x
Your S2VR HD comes with a Host Adapter card, PCI-e or PCI-x. You must have this card properly installed in your
computer in order for your computer to work with the S2VR HD Storage System.
1. Turn off your computer and unplug the AC cord, attached to wall or power strip, etc.
2. Remove the cover of your computer and locate an available PCI-e or PCI-x slot on your motherboard & install
the required Host Adapter card.
Important Note: PCI-e and PCI-x cards are NOT interchangeable please check with your computers
original documentation to see which of these interfaces are supported in your particular system.
The PCI-x card will work with older PCI slots, however your performance will be reduced.
Driver Installation for Host Controller Card
1. Turn computer on.
2. Insert CD in CD-ROM drive.
3. Open CD, then open file CalDigit FASTA-4.pkg by double clicking on it.
4. Introduction Screen, CLICK Continue.
4
5. Select your OS hard drive as the Destination.
6. Next, CLICK Install.
7. Finishing Installation, CLICK Continue.
Informational Factoid: The FAQ section on our website has answers to the most
common questions and or potential problem(s) that you may encounter, please go to
http://www.caldigit.com/faq.asp
CalDigit, Professional Grade Products.
We are here to help!
for more information.
5
8. Installation complete, CLICK CLOSE.
Verify System Profiler
Check to make sure that the card has been installed under System Profiler.
Informational Factoid: Did you know that there are demonstration videos available
on the CalDigit website that will show you some of the technical aspects & real life
usage of the S2VR product line? Go to: http://www.caldigit.com/S2VRDuoOnlineDemo.asp
for more information.
CalDigit, Professional Grade Products.
6
Install S2VR Manager
1. Double CLICK the application on the provided CD,
CalDigit S2VR v1.03.
2. Introduction, CLICK Continue.
3. Select your OS Hard Drive as the destination, then CLICK Continue.
7
4. Installation Successful, CLICK Close.
5. Find the S2VR Manager. Directory: OS drive > Applications > Utilities > CalDigit S2VR > S2VR Manager
6. Drag S2VR to the Launcher.
7. Restart your computer for the S2VR Manager Installation to be complete.
8
Loading...