Uniprep 4 XL
Rotary Scraping Tool
Operating Instructions
Product Code: 01-05-010
Revision: 2
Designed and Manufactured in the UK
Helping you
make the right
connections.
© Copyright Caldervale Technology Ltd.
The copyright for this product and instruction manual is held by Caldervale Technology Ltd.
Any technical specifications, or illustrations part of this manual cannot be reproduced, used
illicitly or distributed in any form for competitive purposes.
Operating Instructions Uniprep 4 XL Rotary Scraping Tool
Contents
Contents
Page
01. Introduction 02
02. Safety Instructions 03
03. Operation 04
04. Removal After Completion 06
05. Specifications 07
06. Parts Diagram 08
07. Warranty Information 10
08. Certificate of Conformity 12
09. Service and Repair
13
10. Decommissioning and Disposal 13
01
Operating Instructions Uniprep 4 XL Rotary Scraping Tool
01. Introduction
01.
Introduction
General Description
The pipe preparation tool is designed to provide a fusible surface
on any polyethylene pipe material (new, weathered or previously
installed). In accordance with Gas Industry Standards GIS/PL2-5 Part 5
Electrofusion ancillary tools.
This product (Uniprep 4 XL) have been manufactured, inspected and
tested in accordance with the ISO9001 quality control systems
procedures in place at Caldervale Technology Ltd, Dewsbury.
Important!
This tool should be used in accordance with the pipe manufacturers’
recommendations and in line with local codes of practice.
This manual outlines the operation of the pipe surface preparation
tooling for the scraping of polyethylene (PE) pipe and forms a part
of the product to which it relates. It should be kept for the life of the
product. Any amendments issued by Caldervale Technology Ltd should
be incorporated in the text. The manual should be passed to any
subsequent holder or user of this product.
and
02
Before Using
It is important to ensure all component parts are present and in
serviceable condition. In addition, the condition of the cutting / peeling
tip should be checked for damage or excessive wearing.
Operating Instructions Uniprep 4 XL Rotary Scraping Tool
02. Safety Instructions
02.
Safety Instructions
1. Read and understand the whole instruction booklet before using
the tool.
2. It is imperative that all possible precautions are made to avoid
unexpected pipe movement when the tool is being used.
3. Never use the tool on pipes that are not within the specified
dimensions.
4. The tool tip holder spring tension is factory set and MUST NOT be
tampered with, without adequate training or instruction.
5. Operatives should wear eye protection, gloves, safety headwear and
footwear when using the equipment.
6. A single scrape / pass cannot be guaranteed to provide 100%
preparation, where this is required users are advised to consider
making 2 scrapes around the pipe.
03
Loading...