CalAmp CVF-200-23, CVF-200-27, CVF-200-24 Installation & Quick Start Manual
© 2015 CALAMP / MBUD-0278v1 | 05/2015
WWW.CALAMP.COM
Questions? Call: 888-823-7237 or Email: techspecialists@calamp.com
CVF-200 Installation
Quick Start Guide
1
22
Red
Power
Primary power to the CVF 12V Nominal
Battery Positive
2
22
Black
Ground
Vehicle or Chassis Ground
Battery Negative
3
22
White
Ignition
Ignition wire
Required for Starter Disable & Tow
Alert
4
22
Green
Output 0
Output to Starter Disable Relay
Output to Starter Disable Relay
5
22
Blue
Input 1
Not Used
Not Used
6
22
Blue/White
Output 1
Output to Payment Reminder Buzzer
Output to Payment Reminder Buzzer
CVF-200 INSTALLATION PROCESS – EASY AS 1-2-3
STEP ONE: SELECT THE INSTALLATION LOCATION
For optimal performance, CalAmp recommends
The CVF-200 is a full-featured, GPS product designed for collateral asset protection in automobiles. The new, smaller-sized
devices are equipped with CalAmp’s proprietary SkySmart technology, providing customers with any required OTA (over-the-air)
updates device updates, dual processor performance and standard battery backup. The CVF-200, when coupled with the
LenderOutlook
TM
collateral assurance solution, is ideal for vehicle finance, auto rental and location-based applications.
The CVF –200 series offers three device model options. All models include battery backup and a motion detector. The battery
backup provides protection against potential tampering, and the motion detector provides notification if a vehicle is towed.
Additionally, the CVF-200 series supports LenderOutlook’s Mileage Manager and Location Validation Reporting.
P/N
CVF-200-23 CDMA, Locate Only
CVF-200-24 CDMA, Locate with Starter Disable
CVF-200-27 CDMA, Locate with Starter Disable and Payment Reminder
Device Type Description
Backup
Disconnect &
Tow Alerts
Location Validation
Analytics
CVF-200 Wiring Harness
Wire Wire Gauge Color Signal Name Description Input/Output
On-line
Renewals
The CVF-200 must be installed in a horizontal position, label-side up and unobstructed by metal.
an in-dash installation.
• above the gauge cluster
• above the air vent
• above the glove box
© 2015 CALAMP / MBUD-0278v1 | 05/2015
WWW.CALAMP.COM
Questions? Call: 888-823-7237 or Email: techspecialists@calamp.com
STEP TWO: INSTALL THE CVF-200 AND OPTIONAL OUTPUTS
STEP THREE: ACTIVATE DEVICE AND TEST
LenderOutlook Installation Port a l
CalAmp recommends power generation from the vehicle’s ignition harness. This is required for with use with the Starter
Disable relay, Payment Reminder Buzzer and Tow alert.
Note: Verify that the white wire is powered only with the key in the Engine On condition, not the ACC or radio key position.
Before testing the device’s cellular and GPS signal strength,
confirm that both LED lights on the device are solid and the
device is installed in its final location within the vehicle
. The
device must acquire a GPS signal and communicate with the
wireless network.
Note: Confirm with the Lender for pre-funding
requirements and which functions to apply.
Two options for activating and testing devices:
• Installation Portal within the LenderOutlook application
• MobileInstall app, available as a free download from the
Google Play Store.
MobileInstall app
Loading...