All information in this user manual is protected by copyright law. Whereby, no
organization or individual shall copy or reprinted the whole or part of this user manual
by any means without written authorization from Xiamen Caimore Communication
Technology Co.,Ltd.
Trademarks :
Caimore,, & CAIMORE are all registered trademarks of Xiamen Caimore
Communication Technology Co.,Ltd. Other trademarks mentioned in this manual
belong to other organizations related. Xaimen Caimore Communication Technology
Co.,Ltd does not own the right of other trademarks and logos.
Notice:
Due to product updates or functional upgrading, we may renew the content of this
file,andthisfileonlyforreference.Allthestatements,information,
recommendations, etc. in this file do not compose any form of guarantee and we
Caimore reserves the right of final explanation.
Revision History:
Tel:+86 592 5901215web: en.caimore.com
Xiamen Caimore Communication Technology Co.,Ltd
2
2
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
(Note : The power accessories for WIFI Vehicle device are using three vehicle
power supply cables---red, yellow and black. The red is positive and connect the
ACC,the black is negative, and the yellow is positive and connect the battery with
the voltage range of 7V-33V.Ifyou want to have other indoor tests, please use the
power adapter and connect to the DC with vehicle cable.)
1.3Indicator:
Indicator:
2.1 Packing List
Tel:+86 592 5901215web: en.caimore.com
Chapter 2 Installation
Xiamen Caimore Communication Technology Co.,Ltd
7
7
1 PowerIndicator
②
WIFIIndicator
③
COMMCommunication
3G/4G Antenna
Power light
Online light
SIM card slot
3G/4G
indicator
light
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
SIM cards store information of user ’s ID, telephone directory, network settings,
and additional services etc. Gateway supports 1.8V/3V/5V SIM card, SIM card
interface socket uses a drawer-type SIM card connector, and users can easily install
SIM card without open the chassis.
Without electrifying device, please use a needle object to press on the out button
of SIM card outlet, SIM card sheath will flick out at once. Cover SIM card with SIM
card sheath. But you must pay attention to put the side which has metal point of SIM
card outside, and insert card sheath back to SIM card outlet. See below of the picture:
Tel:+86 592 5901215web: en.caimore.com
Xiamen Caimore Communication Technology Co.,Ltd
9
9
Picture 2-3-1
Warning: forbid to pull out or insert SIM card with electricity.
This Gateway supports RS232 asynchronous communication serial interface
and adopts RJ45. Serial interface mainly used to configure control or configure to be
DTU function.
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
We release this setting instruction in order to realize below mentioned two points.
First, When customer receives our device, they can check fast whether the device is
good or not, whether it can work normally or not. Second, Most customer can use
device fast by only changing setting parameters of this setting instruction (other
Tel:+86 592 5901215web: en.caimore.com
Xiamen Caimore Communication Technology Co.,Ltd
11
11
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
parameters are default setting). Take Window XP as an example, let us explain our
wireless industrial fast setting process.
Fast setting usually need to configure WAN parameter and LAN parameter and
keep other parameters as leaving-factory default setting. If need to change other
parameters, please read < chapter 4 Detailed Parameters Configuration >
3.1、Inset SIM card into gateway SIM card holder(
3.2、Connect antenna(refer 2.4)
refer 2.3
).
Tel:+86 592 5901215web: en.caimore.com
Xiamen Caimore Communication Technology Co.,Ltd
12
12
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
address automatically ”, after that, then click “OK” . In this way, wireless gateway
assigns IP address to customer PC automatically. At this time, if DNS also adopt
assigning automatically, also can select “obtain DNS server address automatically ”,
then DNS setting is also ok. When arrive <3.5 Set DNS>, customer can skip and no
need to set DNS.
Method 2:Adopt static IP
Click Windows system “ Control Panel” -> click“ network connection”->“ local
connection” ,then select “ properties(R) ” ,select “ Internet protocol (TCP/IP) ” ,
click“properties(R) ” , it will show following window, then revise IP address
according to below example (customer can configure his own IP address according to
actual situation, but customer has to make sure IP address of PC side and gateway
side are in the same network segment.method of configure gateway IP address, please
reference ( 4.1.3 LAN configuration ) , meanwhile please type LAN IP address of
wireless gateway into TCP/IP properties “ default gateway ”on PC side and consider
it as PC default gateway), after revising, please click “ OK”.
This example parameter setting:
Tel:+86 592 5901215web: en.caimore.com
Xiamen Caimore Communication Technology Co.,Ltd
15
15
Open “IE”, type 192.168.9.1:9999 (gateway default LAN port default IP
address)on the address bar. Picture as below:
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
If “method 1: adopt obtain IP automatically “of “3.3 Network Setting on PC
Side” has selected “Obtain DNS server address automatically” and also save it,
then can skip this step.
After finishing 3.4 Setup WAN Information, please re-power wireless
gateway, then wait for gateway “online” indicator to be on, when it on, customer
can set DNS of PC side.
Click“local connection”, select “properties(R)”, select“Internet protocol (TCP/IP)”,
click “properties(R)”, it will display below window, select“Obtain DNS server
address automatically”, then click“OK”. In this way, gateway will assign DNS server
address automatically for PC.
Tel:+86 592 5901215web: en.caimore.com
Xiamen Caimore Communication Technology Co.,Ltd
20
20
Picture 3-5-2
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Method 2: Set DNS of PC according to DNS obtained by gateway
According to the third chapter, the method of rapid configuration, configurate and
connect PC with wireless gateway, and then set the IP address of each other. Finally,
login gateway by IE; when login on network successfully, namely online indicator is
on, please click “system status”of gateway to check DNS assigned by carrier.
Tel:+86 592 5901215web: en.caimore.com
Xiamen Caimore Communication Technology Co.,Ltd
21
21
Record this DNS assigned by carrier, and then type this DNS to“First DNS server” of
PC. The process is to click “start” ->“control panel”; click “network connection”,
and picture as below:
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Picture 3-5-4
Click “local connection”; select “properties(R)”; select“Internet protocol (TCP/IP)”;
click “properties(R)”; and it will display below window; revise it according to DNS of
gateway system status; after that, click“OK”.
Tel:+86 592 5901215web: en.caimore.com
Xiamen Caimore Communication Technology Co.,Ltd
22
22
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
When finishing 3.1-3.6 steps, please re-power wireless gateway, and then wait
gateway“Online ” indicator on (if indicator is not on after more than 1 minture, please
check above steps and configuration information are right or not. If all are right, but
indicator is still not on, please feel free to contact us for technical help). when online
indicator is on, users can use gateway to login network or operate wireless data
transmission. Type website address on IE of PC, like www..com, and then
congratulations on you, you are online already and can transfer wireless data now.
Tel:+86 592 5901215web: en.caimore.com
Xiamen Caimore Communication Technology Co.,Ltd
23
23
Chapter 4 Detailed Parameter Configuration
Calling center number, Access Point Name, Username and Password:
Usually the information is default setting (refer to Appendix 5). Usually it
doesn’t need to revise. If use APN/VPND, it needs to type these information
supplied by ISP to the exact place.
Searching Network Mode: According to requirements to select the network
type, default as AUTO.
PIN code: If mobile UIM/SIM card set PIN code already, please input it here.
Extra Initialization commands: it used in special situation, usually here is
blank. If customer has any especial command, customer can input here.
PPP User Name Authentication Protocol;This device uses the PPP
authentication mode for user name and password negotiation.
The way to obtain IP: Support obtaining IP automatically, specify the local IP
and Specify the Remote client’s IP. Defaultsituation is obtain IP
automatically, it is the IP address assigned by ISP when wireless dial-up. If
select Specify IP address, please input according to ISP supplied information.
Otherwise, it can’t be online by dial-up. If ISP requires to specify one kind,
and the other one is obtaining automatically, please input 0.0.0.0.
Notice:
1. PIN code can’t be input casually to avoid locking the card.
2. Please don’t input extra initialization command casually to avoid dial-up is
unavailable.
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)