Caig Labs L260-N8 Data Sheet
DeoxIT L260Np
7
Mechanical & Electrical Grease
Part No.: L260Np
Formulation: 99.5% DeoxIT7 L260Np Lithium Grease
0.5% Deoxidizing agent
No particles
Container Size:
L260-N12C 100% syringe dispenser 12 g
L260-N1 100% jar 28 g
L260-N8 100% jar 226 g
L260-N35 100% pail 16 Kg
Product Description:
Manufactured in semi-solid form for use as a combination cleaning, deoxidizing, protecting and
lubricating preparation. Greases protect against oxidation (galvanic corrosion) and are free
of mineral acids, sulphurs, alkalis and other noxious components aggressive to metals. DeoxIT7
Greases improve performance of electrical contacts and mechanical components that require
precise lubrication.
Particles: None. Maximum lubrication for relatively clean surfaces.
Temperature range: -40 to +260oC.
Features/Benefits:
100% Grease - Safe on Plastics.
Lithium-based preparation.
Good lubrication, excellent wear resistance, excellent pressure resistance, excellent oxidation
(galvanic corrosion) protection, high dripping-point characteristics.
USES:
Electrical:
Antenna connections, battery terminals, Buss bars, commutators, conductor rails, conductors,
contactors, disconnects, drying & processing equipment, high amperage/high voltage applications,
industrial electrical equipment (lifts, cranes, robotics, etc.), power tools, relays & switches (heavy
duty, knife, step, rotary), etc.
Mechanical:
Bearings (all types), doors (closures), drives (chain/sprockets), hatch closures, O-rings and seals,
linear motion systems, plugs (threaded holes), rack & pinion assemblies, screw devices (jacks, rails),
slide bushings, sliding parts, tracks/guides/rails, threaded closures, worm gears, etc.
Page 1
SPECS: (Base material)
M260 L260TYPE: M260 L260TYPE:
Flow Point, min. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viscosity @ 100oF, SUS . . . . . . . . . . . . . . . . . . . . .
ASTM Dropping Point . . . . . . . . . . . . . . . . . . . . . . .
Specific Gravity @ 20oC . . . . . . . . . . . . . . . . . . . . . .
Flash Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Lowest/Best Operating Temp. (general) . . . . . . .
1
Highest Operating Temp. (continuous duty) . . . .
Acid & Neutralization No. (mg KOH/g) . . . . . . . . . .
Saponification No. (mg KOH/g) . . . . . . . . . . . . . . .
Electrical Conductivity (27oC) (10
2
Dielectric Constant E
. . . . . . . . . . . . . . . . . . . . . .
r
-12
ohm-1 cm-1) . . .
(Tan ) (10-4) . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Dielectric Strength Ed . . . . . . . (kV/cm) . . . . . . .
2
Specific Insulation Resistance D (1012 ohm-cm) .
-30oC
763
260oC
1.85
300oC
-30oC
200oC
1.15
2.79
0.17
2.751
54.6
5.7
+.50/-.03
-30oC
785
285oC
1.87
300oC
-30oC
200oC
1.17
2.81
0.17
3.236
45.9
5.9
+.50/-.03
Oil Type . . . . . . . . . . . . . . . . .
Soap Type . . . . . . . . . . . . . .
Soap %, . . . . . . . . . . . . . . . .
ASTM - Penetration . . . . . . .
NLGI . . . . . . . . . . . . . . . . . . .
Deoxidizer . . . . . . . . . . . . . . .
Oxidation Inhibitor . . . . . . . .
Corrosion Inhibitor . . . . . . . .
Texture . . . . . . . . . . . . . . . . .
Color . . . . . . . . . . . . . . . . . . .
1
Temperatures are conservative values for reference only.
2
NOTE: All values are relative to an ambient temperature of 26 to
28oC (approx. 80oF). Dielectric strength value is a statistical average
taken from 10 measurings. Voltage measurement taken with 0.5%
accuracy. Tests conducted on base material only. Greases with parÂticles may have different measurements.
Other Formulations:
L260Cp Lithuim formulation with copper particles
L260Ap Lithuim formulation with aluminum particles
L260Gp Lithuim formulation with graphite particles
L260Qp Lithuim formulation with quartz particles
L260GQp Lithuim formulation with graphite and quartz particles
M260Np Mineral based with no particles
M260Cp Mineral based with copper particles
Mineral
None
280
2
Yes
Yes
Yes
Buttery
Amber
Synthetic Blend
Lithium-12 Hydroxy
9.52
295
2
Yes
Yes
Yes
Short Fiber
Amber
Shipping Information:
Hazardous: No
Other Information:
RoHS Compliant: YES
L260 MSDS Link:
Product Sheet: http://store.caig.com/app/site/media/sitemedia.nl/id.778/.f
MANUFACTURER DISCLAIMER:
To the best of our knowledge, the information contained herein is accurate. However, neither CAIG Laboratories, Inc., or any of its
subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may
present unknown hazards and should be used with caution. In particular, improper use of our products and their inappropriate combination
with other products and substances may produce harmful results which cannot be anticipated. Final determination of the suitability of
any material is the sole responsibility of the user. Although certain hazards are described herein, we cannot guarantee that these are the
only hazards that may exist. All service performed on internal parts and equipment should be provided by qualified technicians.
Contact Information:
North America
CAIG Laboratories, Inc.
12200 Thatcher Court
Poway, CA 92064 USA
Tel: (858) 486-8388
Fax: (858) 486-8398
Website www.caig.com
www.deoxit.com
General email info@caig.com
Technical email tech@caig.com
Page 2
Loading...