Caframo 967 User Manual

CARE AND MAINTENANCE

This Caframo fan has been designed for many years of
problem free operation. There are however a few simple
things that you can do to enhance the life of your fan.

1. Keep the air vents clear and free of dirt. These vents are
necessary to keep the motor cool while in use. Unplug the
fan, and use a vacuum to remove any dirt from the vents.

2. Replace the fan blade should it become damaged.

TO REPLACE A DAMAGED FAN BLADE

1. Holding the body of the fan in one hand, grasp the
damaged blade in your other hand, and pull the blade off
the motor shaft.

2. Firmly grasp the new blade and push it straight onto the
motor shaft as far as it will go.

To order a replacement fan blade contact:

$ 6 ft. power cord

Customer Service
Caframo Ltd.
R.R.#2
Airport Road
Wiarton, Ontario, Canada
Phone: [phone]

-

1850 rpm high

-

OPERATION

1. To operate the fan, turn control knob to first setting

for low speed, last setting for highest speed.

Model 967

READ AND SAVE THESE INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electrical shock, this plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.

WARNING - To reduce the risk of fire or electrical shock, do not use this product

with any solid-state speed control device( Dimmer
Switch).

$

Unplug fan before cleaning.

$ Use common sense when using this and/or any electrical appliance.
$ Do not position too close to any objects which may be drawn into the blades and

stop the air flow.

$ Do not use outdoors
$ Do not use on wet surfaces or immerse in water. Never allow water to drip into

the motor housing.

$ Do not use if power supply cord becomes frayed or brittle.
$ Do not use gasoline, thinners or other harsh chemicals to clean fan.
$ Do not use near fireplaces, furnaces, stoves, or other high temperature heat

sources.

Specifications

$ 120 volts, 60Hz, 0.38 Amp.
$ 4 speeds 1200 rpm low

1350 rpm
1600 rpm

OWNER=S MANUAL