Page 1
Café™ 30" Warming Drawer
ADA
COMPLIANT
CTW900M2NS5
FEATURES & BENEFITS
A range of temperatures for every need - Keep fresh courses at the ideal
temperature or heat up dishes perfectly using variable degree control with
80- to 210-degree settings
Humidity made flexible - From crispy to tender, always achieve the right
texture with variable humidity control that never compromises results for
the sake of warmth
A distinctly clean, smooth look - Your drawer is as easy on the eyes as it
is to use thanks to a frameless front that exudes simplicity and style at the
same time
It only takes a glance - Always know when your drawer is on with an
indicator light that illuminates when it’s in operation
Relish every bit of space - Keep items warm with an elevated half rack that
maximizes drawer space
FEATURES
Full Extension Ball Bearing Glides Ye s
Half Rack Ye s
One-piece stainless steel drawer Ye s
Power Cord Length 4' 8"
Receptacle Type 3-Prong Grounding
Variable Humidity Control Crisp - Moist
Variable Temperature Control Proof(80)/Low(140)/Med(170)/High(210)
Control Type On/O Rocker Switch
Indicator Lights “ON”
CAPACITY
Total Capacity (cubic feet) 1.9
POWER / RATINGS
Heating Element Wattage 450W
Volts/Hertz/Amps 120V/60Hz/15Amps
WEIGHTS & DIMENSIONS
Approximate Shipping Weight 65
Cabinet Width 30
Cutout Dimensions (w x h x d) (in.) 28-1/2 x 9-1/4 x 23-1/2
Interior Dimensions (w x h x d) (in.) 23-7/8 x 6-1/4 x 22-1/16
Net Weight 59
Overall Depth 23 1/4
Overall Height 10 1/2
Overall Width 29 3/4
APPEARANCE
Color Appearance Platinum
Installation
Handle Design Café Minimal
Handle Color Stainless Steel
Under Cooktop, Under Wall Oven ,
Flush Appearance with Hidden Controls
Page 2
Café™ 30" Warming Drawer
28-1/2"
10-1/2"
9-1/4"
Locate electrical
outlet in adjacent
cabinet 16" from
left side or 42"
from right side
29-3/4"
23-1/4"
24"
recommended
from floor
for under
countertop
installation
Allow 5/8"
overlap on
all sides
23-1/2" min.
2" min.
9"
9-1/4"
28-1/2"
Oven
cutout
2x2 or 2x4
anti-tip block
against rear
wall 9" from
floor to bottom
of block
1" min. above toekick
or adjust to oven
installation height
9"
Install
2x4 or 2x2
anti-tip
block 9"
from floor
to bottom
of block
2x4 or 2x2
runners or solid
bottom
(Must Support 150 lbs.)
Electrical outlet
flush with side of
cabinet 7" max.
Electrical outlet
42" max. from
right side
1-1/2"
Cabinet top
25"
36"
Countertop
height
1" Min.*
9-1/4
"
Install a solid barrier
below a cooktop
Install a solid barrier
below a cooktop
9"
23-1/2
" min.
Solid barrier
1/4" Air gap
Electrical
outlet 16" max.
from left side
28-1/2"
Install 2x4 or 2x2
anti-tip block against
rear cabinet wall 9" from
floor to bottom of block
7"
CTW900M2NS5
CTW900P2NS1
CTW900P3ND1
CTW900P4NW2
CTW900M2NS5
WARRANTY
Parts warranty Limited 1-year entire appliance
Labor warranty Limited 1-year entire appliance
Warranty notes See written warranty for full details
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Undercounter Installation: A solid barrier must be installed at least 1" from the
lowest point of the bottom of cooktop burner box to the top of the cutout. Use any
solid material such as 1/4"-thick plywood. Allow at least 1/4" air gap between the
barrier and the top of the warming drawer. See label on top of the warming drawer
for approved cooktop models.
Under Oven Installation: Additional clearance between cutouts may be required.
Check to be sure that oven supports above the warming drawer location do not
obstruct the required interior 23-1/2" depth and 9-1/4" height.
Door handle protrudes 2-1/2" from door face. Cabinets and drawers on adjacent
45° and 90° walls should be placed to avoid interference with the handle.
Installation Information: Before installing, consult installation instructions packed
with product for current dimensional data.
For answers to your Café™ product questions, visit our website at cafeappliances.com.
© 2019 GE A ppliances PC 92627 05/19
Loading...