Cafe CT9070SHSS Specs
F
E
Conduit
40"
D
Cutout depth
23-1/2" MIN
B
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from oor
Cutout height
27-1/4" MIN.
27-5/16" MAX.
16-1/4" MIN.
32-1/2" MAX.
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from oor
Cutout height
27-1/4" MIN.
27-5/16" MAX.
16-1/4" MIN.
32-1/2" MAX.
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and ush with sides of cutout
or solid bottom oor.
F
E
Conduit
40"
D
Cutout depth
23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout 1-1/4"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 28-5/8"
F – Overall width 29-3/4"
CT9070
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from oor
Cutout height
27-1/4" MIN.
27-5/16" MAX.
16-1/4" MIN.
32-1/2" MAX.
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
Cutout depth
23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout 1-1/4"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 28-5/8"
F – Overall width 29-3/4"
CT9070
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from oor
Cutout height
27-1/4" MIN.
27-5/16" MAX.
16-1/4" MIN.
32-1/2" MAX.
22" to
bottom of
junction box
Junction box
location
MAX.
CT9070SH
GE Cafe™ Series 30 in. Built-In French-Door Single Convection Wall Oven
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
MOST 30" WALL CABINETS CAN BE USED
WITH THIS UNIT.
NOTE: These ovens are not approved for
stackable installations. Cabinets installed
adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating.
Door handle protrudes 2-1/2" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
INSTALLATION I N FORMATI O N :
Before installing, consult installation
instructions packed with product for
current dimensional data.
KW R ATI N G
240V 4.5
208V 3.4
BREAKER SIZE
240V 20 Amps
208V 20 Amps
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
CT90T0
ADA
COMPLIANT
Listed by
Underwriters
Laboratories
Speci fication Revised 4/16
CT9070SH
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
X
Y
Countertop
If Y = 0.0” the n X = 0. 0”
O
therwise,
X
= Y + 1.0” (2.5 cm) Min.
Ca binet D oor
INSTALLATION TO ADJACENT COUNTERTOP
AND CABINET DOORS
14” Min.
O
ven Door Side
C
lea ranc e
(
Both S ides)
16” Min.
O
ven Door
Fr
ont
C
lea ranc e
TOP VIEW
GE Cafe™ Series 30 in. Built-In French-Door Single Convection Wall Oven
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: This model is not approved for installation below a
countertop or in combination with a separate cooktop. The
minimum installation height from the floor is 16-1/4".
NOTE: A minimum gap of 14" from either side of the wall
oven
to an adjacent 45 or 90 cabinet, drawer or was is required to
avoid interference with the opening of the doors. The handles
protrude 2-1/2" from the door face.
NOTE: Countertops may need to be notched on either
side of the wall oven to avoid interference with the
opening of the doors.
Installation information: Before installing, consult installation
instructions packed with products for current dimensional
data and for alternate installation options.
THIS MODEL IS NOT APPROVED
FOR FLUSH-MOUNT INSTALLATION
INSTALLATION TO ADJACENT COUNTERTOP
If Y = 0.0” the n X = 0. 0”
therwise,
O
= Y + 1.0” (2.5 cm) Min.
X
X
Y
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
If both ov ens a re French Door models, then 30” min.
If the sec ond oven is a drop down door model , the n 14” min.
en 30” min .
el, then 14” m in.
INSTALLATION TO ADJACENT
COUNTERTOP AND CABINET DOORS
AND CABINET DOORS
TOP VIEW
9 1/ 2”
Countertop
Ca binet D oor
16” Min.
ven Door
O
ront
F
lea ranc e
C
14” Min.
ven Door Side
O
lea ranc e
C
Both S ides)
(
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
ELEC. ELEC.
Junction box
location (may also
be located in
adjacent cabinet.)
5
1/ 4”
Speci fication Revised 4/16
Loading...