Café™ 30" Five in One Oven
with 240V Advantium® Technology
CSB923M2NS5
FEATURES & BENEFITS
Unmatched versatility to unleash your imagination - Enjoy a whole new level
of cooking flexibility with a single oven that can be used in five dierent
ways. Use it as a Convection Oven, Microwave, Toaster Oven, Warming/
Proofing Oven, and Precision Cook Oven with Advantium Technology.
Cook smarter, not longer - Achieve oven-quality results in a fraction of the
time as halogen light, microwave energy and True European Convection
work together to provide the exact amount and type of heat your food
needs, precisely when it needs it
Say goodbye to rubbery leftovers - Achieve crispy results at microwave
speed with more than 20 reheat programs that make leftovers taste
like new
The perfect marriage of quality and speed - Eliminate the need for
preheating and cook your favorite foods four-to eight-times faster than
a conventional oven
Healthy meals without the fuss - Fresh vegetables and rice are perfectly
prepared with a steam cook option that simplifies the entire process
Clean-up has never been easier - Keep your oven looking like new at
all times with steam clean
The perfect fit you’ve always dreamed of - When you’re updating your
kitchen, attention to detail is a priority. That’s why Café Advantium
wall ovens are guaranteed for an exact fit for an easy and seamless
replacement.
FEATURES
Cooking Modes
Style Built-In
Control Type 7" Full Color LCD Touch Control
Interior Oven Light Ye s
Oven Interior Stainless Steel
Microwave Watts (IEC-705) 950
Turntable Size 16
Control Features
Cooking Technology 5 in 1 Oven with 240V Advantium
Grill Pan Ye s
Rack Type Wire Oven Rack
Precision Cook; Crisp Reheat; Convection;
Microwave; Proof, Warm
Add 30 Sec; Over 175 Programmed Menu
Selections
CAPACITY
Total Capacity (cubic feet) 1.7
POWER / RATINGS
Electrical Input - 240V Watts 6300
Voltage (MIN) 208
Voltage (MAX) 240
Volts/Hertz 240V; 60Hz
Amps 240V/208V 30
Broiler Wattage 2400W
WEIGHTS & DIMENSIONS
Approximate Shipping Weight 92
Cavity (W x H x D) 20-1/16 x 8-1/2 x 17
Height (Front) 20-1/8
Net Weight 82
Overall Height 20-1/8
Overall Width 29-3/4
Overall Depth 21-1/2
Cabinet Width 30
ACCESSORIES
Metal Oven Pan Yes - Precision Cooking Tray
APPEARANCE
Color Appearance Platinum
Handle Brushed Stainless; Café Minimal Style
Café™ 30" Five in One Oven
A= Allow 1" overlap of oven over bottom edge of cutout, and allow
2-3/4" overlap at top edge of cutout.
B= Allow 3/4" - 2-1/8" for overlap of oven over side edges of cutout.
C
L
2x4’s or
equivalent
solid floor
21-5/8"
over centerline
of cabinet
25-1/4"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
20-1/8"
29-3/4"
2x4’s or
equivalent
solid floor
25-1/4"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
20-1/8"
29-3/4"
A= Allow 1" overlap of oven over bottom edge of cutout, and allow
2-3/4" overlap at top edge of cutout.
B= Allow 3/4" - 2-1/8" for overlap of oven over side edges of cutout.
25-1/4"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
20-1/8"
29-3/4"
A= Allow 1" overlap of oven over bottom edge of cutout, and allow
2-3/4" overlap at top edge of cutout.
B= Allow 3/4" - 2-1/8" for overlap of oven over side edges of cutout.
25-1/4"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
20-1/8"
29-3/4"
with 240V Advantium® Technology
CSB923M2NS5
WARRANTY
Parts warranty
Labor warranty Limited 1-year entire appliance
Warranty notes See written warranty for full details
Limited 1-year entire appliance
Limited 5-year magnetron tube
DIMENSIONS AND INSTALLATION INFORMATION
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Note: 2" minimum between cutouts when installed
above warming drawer or single wall oven.
Installation information: Before installing, consult
installation instructions packed with product for
current dimensional data.
20-1/8"
Note: Advantium 240 volt models cannot be
installed under 36 inches height.
Note: Use of the accessory drawer will replace
the bottom trim piece for applicable installations.
Please see installation instructions for full details.
C
L
2x4’s or
equivalent
solid floor
Suitable
bracing
to support
runners
over centerline
(Must support 130 lbs.)
21-5/8"
of cabinet
For answers to your Café™ product questions, visit our website at cafeappliances.com.
29-3/4"
Cabinet width
21-1/2"
To back
of Control
Conduit
(46" long)
4-3/16"
A
B
A
B
Junction box location
2-1/2" MIN. between cutouts
recommended—2" MIN. required
Construct Solid Bottom
MIN. 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
9-1/4" cutout height
28-1/2" cutout width
2" MIN. between cutouts
1" MIN. above toekick or adjust
to oven installation height
(240-volt models only)
Café™ 30" Five in One Oven
with 240V Advantium® Technology
CSB923M2NS5
DIMENSIONS AND INSTALLATION INFORMATION
Preparation with an Accessory Drawer
Prepare the opening: The Advantium 240V can be installed in combination
with other GE/Monogram appliances. Always follow each product's Installation
Instructions to compete the installation.
Single oven installation: Order a 30" wide single oven cabinet or cut the
opening in a wall to the dimensions shown.
* For existing cutouts, a maximum width of 28-1/2" is acceptable. If the
opening is slightly wider, secure a furring strip on each side of the
cutout for securing the oven.
- Always maintain 36-3/4" minimum height from the floor to the cutout in
any single or combined installation.
- Allow 3/4" to 2-1/8" case trim overlap on the sides and 1" overlap on the
bottom of the opening for all models. The amount of overlap on the sides
depends on the actual cutout width. Allow 2-1/4" case trim overlap on the top.
- Oven overlaps will conceal cut edges on all sides of the opening.
When installed over a single oven or a warming drawer, allow at least
2" between the two openings. This separation will provide clearance for
bottom overlap of the Advantium 240V and the other appliance overlaps.
Construct a solid oven floor of 3/8" min. thick plywood supported by 2 x 4
or 2 x 2 runners on all sides.
- the support must be level and rigidly mounted, flush with the bottom edge
of the cutout.
* For existing cutouts, a maximum width of 28-1/2" is acceptable. If the opening
is slightly wider, secure a furring strip on each side of the cutout for securing
the oven.
Note: Additional clearances between the cutouts may be required. Check to
be sure the oven supports above the Warming Drawer location do not obstruct
the required interior depth and height. See Warming Drawer installation
instructions for details.
27" or 30"
36-3/4"
Min.
17-1/2"
23-1/2"
25-1/4"
Installation over Warming Drawer:
27" or 30"
17-1/2"
23-1/2"
25-1/4"
Construct base -
Min. 3/8" plywood
supported by 2x4
or 2x2 runners all
four sides.
Construct base -
Min. 3/8" plywood
supported by 2x4
or 2x2 runners all
four sides.
2" Min.
(3" recommended)
Per warming
drawer
requirement
Installation Over a Wall Oven and Warming Drawer:
* For existing cutouts, a maximum width of 28-1/2" is acceptable. If the opening
is slightly wider, secure a furring strip on each side of the cutout for securing
the oven.
Note: Additional clearances between the cutouts may be required. Check
to be sure the oven supports above the Warming Drawer location do not
obstruct the required interior depth and height. See Warming Drawer
installation instructions for details.
Caution: For personal safety, the mounting surface must be capable
of supporting the cabinet load, in addition to the added weight of this
approximate 80-pound oven and 30-pound drawer, plus additional oven
loads of up to 50 pounds or a total weight of 160 pounds.
36-3/4"
Min.
Installation over a Wall Oven and Warming Drawer:
27" or 30"
45-1/4"
Min.
17-1/2"
23-1/2"
Construct solid
bottom - Min. 3/8"
plywood supported
25-1/4"
Per warming drawer requirement
by 2x4 or 2x2
runners all four
sides
2" Min.
(3" recommended)
Per oven
requirement
2" Min.
For answers to your Café™ product questions, visit our website at cafeappliances.com.
© 2019 GE A ppliances PC92772 06/19
Loading...