Cafe CGU366P2MS1 Specifications
Café™ 36" Gas Rangetop
ADA
COMPLIANT
CGU366P2MS1
FEATURES & BENEFITS
Keep your kitchen sparkling, even when there's a spill with
sealed cooktop burners that contain messes for easy cleanup.
Enjoy a full range of heat settings from ultra-low simmers to
intense boils, with six sealed 18K BTU dual stack burners.
Experiment with every cuisine with reversible burner grates that
are flat on one side and contoured on the other to accommodate
round-bottom cookware like woks.
Easily move heavy cookware across the surface without worry,
thanks to continuous, cast-iron burners.
Confidently cook over a steady flame with the electronic
ignition’s automatic reignition feature that instantly revives any
accidentally extinguished flames.
APPEARANCE
Color Appearance Stainless Steel
Control Knobs
Design Style Professional Stainless Steel
Installation Flush Installation Capable
Dishwasher Safe
Professional-Style
Stainless Steel Appearance
FEATURES
Cooktop Burner Type 6 Sealed, Dual Flame Stacked
Cooktop Surface Porcelain-Enamel
Ignition System Electronic
Burner - Left Front 18,000 BTU
Burner - Left Rear 18,000 BTU
Burner - Right Front 18,000 BTU
Burner - Right Rear 18,000 BTU
Burner - Center 18,000 BTU Front / 18,000 BTU Rear
Control Type Manual Simmer (1-9) Hi
Control Location Upfront
Cooktop Burner Grate Features
Cooktop Burner Grate Material Heavy Cast
Fuel Type Natural Gas (factory set)
Valves (Degree of Turn) 270
Automatic Re-Ignition Ye s
140 Deg. Simmer Burner All Burners - Adjustable
Configuration 6 Burners
Burner Indicator Light Ye s
Dishwasher Safe Knobs Ye s
Continuous Grates
Dishwasher Safe
Matte Black
Porcelainized Cast Iron 3-Piece Reversible (Flat/
Wok) Grates
Self-Clean
POWER/RATINGS
Burner BTU Ratings (000's/BTU) -
LP Gas
Burner BTU Ratings (000's/BTU) Natural Gas
Volts/Hertz/Amps
(6) 15.0
140 Degree simmer
(6) 18.0
140 Degree simmer
120v
60Hz
15A
WEIGHTS & DIMENSIONS
Approximate Shipping Weight 163 lb
Cabinet Width 36 in
Net Weight 135 lb
Overall Depth 27 1/2 in
Overall Height 8 1/2 in
Overall Width 35 7/8 in
ACCESSORIES
Conversion Kit Included - Nat. Gas to LP
Factory-installed island back guard Ye s
High Altitude Kit WB28K10553
Optional Back guard
12" stainless steel backsplash (ZX12B36PSS)
30"-36" adjustable stainless steel backsplash with
warming shelf (ZXADJB36PSS)
Café™ 36" Gas Rangetop
CGU366P2MS1
WARRANTY
Parts warranty Limited 1-year entire appliance
Labor warranty Limited 1-year entire appliance
Warranty notes See written warranty for full details
DIMENSIONS AND INSTALLATION
Professional rangetops oer a number of choices in size and rangetop
configurations.
Backsplash Accessories: The rangetop requires a 12" minimum clearance
to a vertical combustible surface at the rear. A backsplash is required
for installations with less than 12" clearance. The following backsplash
accessories are available, or a custom, non-combustible backsplash
can be used.
UX12B36PSS, 12" backsplash
UXADJB36PSS, 36" backsplash with shelf
Backsplash with Warming Shelf: All Professional Hoods feature infrared
warming lights. The 30"-36" adjustable backsplash with warming shelf is
a perfect complement when installed with the tapered or straight-sided
hoods.
- Restaurant-Style Professional Hoods are shipped with a 22" stainless
steel backsplash and warming shelf.
Advance Planning for Professional Rangetops: Professional rangetops
oer a number of choices in size and rangetop configurations.
- All Professional rangetops are factory set for natural or liquid propane
gas. The correct model should be ordered for the installation situation.
Note: Conversion kits are included with the rangetop if the wrong gas type
was ordered. High Altitude kit, WB28K10553, is also available. The kits
must be installed by a qualified service technician at additional cost.
Electrical Requirements: Rangetops must be supplied with 120V,
60Hz, and connected to an individual, properly grounded branch circuit
protected by a 15 amp circuit breaker or time-delay fuse.
Gas Supply:
- Natural gas models are designed to operate at 5" water column pressure.
For proper operation, the pressure of the natural gas supplied to the
regulator must be between 7” and 13” water column.
- The liquid propane models are designed to operate at 10" water column
pressure. For proper operation, the pressure of the LP source to the
regulator must be between 11” and 13” water column.
Product Dimensions and Clearance:
A suitable overhead vent hood is required for models with a grill and
is recommended for all other models. Due to the high heat capacity of
this unit, particular attention should be paid to the hood and ductwork
installation to assure it meets local building codes.
Clearances between rangetop and side wall or combustible material must
be at least 12" on each side.
Allow 8" free space below the top surface of countertop. Allow additional
clearances below the burner box to install the regulator and make house
gas supply connections. Use a 90° elbow to route the gas connections and
limit interference with drawers or other cabinetry.
* The opening between a 4" high backsplash must be 36" to allow the
rangetop to slide back against the wall.
WARNING: Installations without a hood require 48" minimum to
combustibles above the rangetop. A custom hood installation with
exposed horizontal combustible surfaces must have an “auto-on” feature.
Refer to hood installation instructions for specific hood clearances. The
surface of the entire back wall above the countertop and below the hood
must be covered with a non-combustible material such as metal, ceramic
tile, brick, marble or other stone.
For answers to your Café™ product questions, visit our website at cafeappliances.com.
Loading...