Cafe CEP70302MS1 Specsheet
Café™ 30" Built-In Knob Control
ADA
COMPLIANT
Electric Cooktop
CEP70303MS2 / CEP70302MS1
ALSO
AVAILABLE IN
FEATURES & BENEFITS
Keep your kitchen looking sleek and running eciently with a glass
surface that delivers rapid, even heat.
Tailor your burner size to your cookware with an 9"/7"/5" element
that's powerful enough to boil water quickly.
Take your design to the next level with white LED backlit knob lighting
with beveled edge black glass surface
When you’re updating your kitchen, attention to detail is a priority.
That’s why Café cooktops are guaranteed for an exact fit for an easy
and seamless replacement.
Tailor your burner size to your cookware with an 8"/5" dual element
Evenly heat large cookware like griddles or dutch ovens by controlling
two 7" synchronized elements with just the touch of a button.
Serve every dish at the perfect temperature thanks to a keep warm
setting on a fully-functional 6" element.
Melt butter without browning it using the melt setting.
Prevent unintended burner activation with control lock capability.
Keep your kitchen accident-free with a hot surface indicator light
that shows you with a glance when elements are too hot to touch.
CEP70302MS1
Stainless Steel
with Brushed
Stainless knobs
FEATURES
Cooktop Surface Black Ceramic Glass with Beveled Edge
Cooktop Burner Type 5 Ribbon Smoothtop
Element - Left Front 7" 1500W
Element - Left Rear 7" 1500W
Element - Right Front 8"/5" 2200W Dual
Element - Right Rear 6" 1200W
Element - Center 9"/7"/5" 3000W Power Boil
Control Location Front Center
Control Type Knob (Infinite switch)
Cooktop Control Features
Dishwasher Safe Knobs Ye s
Melt Setting Ye s
Indicator Lights
Filler trim kit JXTR32B
Control Lock Capability
Keep-Warm Setting
Sync-Burners Capability
Melt Setting
5 Hot Surface
Surface Element
"ON" Blue/Red
WEIGHTS & DIMENSIONS
Approximate Shipping Weight 48 lb
Cabinet Width 30 in
Cooktop Size 30 in
Cutout Dimensions
(Width x Depth) (In.) 28-1/2 x 19-5/8
Net Weight 42 lb
Overall Depth 20 7/8 in
Overall Height 5 9/16 in
Overall Width 29 3/4 in
POWER/RATINGS
Max. Connected Load (kW) at 208V 7.1
Max. Connected Load (kW) at 240V 9.4
Max. Current Draw (Amps) at 208V 33.9
Max. Current Draw (Amps) at 240V 39.2
Recommended Circuit Breaker
(Amps) at 208V 40
Recommended Circuit Breaker
(Amps) at 240V 40
ACCESSORIES
Griddle Optional
APPEARANCE
Frameless Yes
Café™ 30" Built-In Knob Control
Electrical junction box 16" MIN.
below countertop
CP9530SJ, PP9030DJ, JP7030DJ,
JP5030DJ
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
2" MIN. clearance
to side wall from cut-out
on left sides of unit and
1-1/2" clearance on
right side of unit
INSTALLATION ABOVE A WALL OVEN
Electric Cooktop
CEP70303MS2 / CEP70302MS1
WARRANTY
Parts warranty Limited 1-year entire appliance
Labor warranty Limited 1-year entire appliance
Warranty notes See written warranty for full details
DIMENSIONS AND INSTALLATION
Important: Requires a 5" free area between the bottom of the cooktop to any
combustible material, i.e., shelving. Free area not required when installing wall
oven underneath cooktop. Refer to installation instructions. Requires a 15"
minimum from cooktop to adjacent overhead cabinets. Units are furnished with
a 48" flexible armored cable.
Note: 30" Ribbon cooktops are approved for use over select GE 27" and
GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and
wall oven/warming drawer installation instructions packed with product for
current dimensional data. If installed with a GE Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed with
product before installing.
routed to install downdraft.
flat countertop surface and 25" minimum total countertop depth. In addition,
other clearances to front edge of the countertop must be considered. Before
installing, consult installation instructions packed with product for current
dimensional data.
Cutout filler trim kit: A filler trim kit is available for use if your countertop cutout
is larger than the dimension shown, up to 29-13/16" x 20-7/16". Order JXTR32B
for black or JXTR32W for white, to reduce the cutout opening for installation of
this cooktop. These kits may be ordered from your GE Appliances Dealer.
Voltage (60HZ AC) 240V 208V
Connected load (max.) 9.4Kw 7.1Kw
Current draw (max.) 39.2 Amps 33.9 Amps
Recommended circuit breaker† 40 Amps 40 Amps
†
Note: Check local codes for required breaker size.
Cooktop gas/electric supply may need to be re-
The countertop cutout requires 23-1/2" minimum
Approximate Cooking Dimensions
19-1/4"
2-1/2" MIN.
Required
29-3/4"
3-1/4" at front of unit and
5-9/16" at conduit location
1-3/4" MIN.
to rear wall
To insure accuracy, it is best to make a
template when cutting the opening in the counter
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
Cooktop
28-1/2" to
28-5/8"
20-7/8"
28"
19-5/8" to
19-3/4"
Installation above a wall oven
2-1/2" MIN
From front edge
of countertop to front
edge of cooktop cutout
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
ADDITIONAL ACCESSORIES
CXCE1HKPMBZ
Brushed Bronze
Knobs
For answers to your Café™ product questions, visit our website at cafeappliances.com.
CXCE1HKPMSS
Stainless Steel
Knobs
CXCE1HKPMBT
Brushed Black
Knobs
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
Electrical junction box 16" MIN.
below countertop
2" MIN. clearance
to side wall from cut-out
on left sides of unit and
1-1/2" clearance on
right side of unit
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
CXCE1HKPMCU
Brushed Copper
Knobs
© 2018 GE A ppliances PC90238 07/18
Loading...