The names, logos, emblems, slogans,
vehicle model names, and vehicle
body designs appearing in this manual
including, but not limited to, GM, the
GM logo, CADILLAC, the CADILLAC
Emblem, and XT4 are trademarks and/
or service marks of General Motors
LLC, its subsidiaries, affiliates,
or licensors.
For vehicles first sold in Canada,
substitute the name “General Motors
of Canada Company” for Cadillac
Motor Car Division wherever it
appears in this manual.
This manual describes features that
may or may not be on the vehicle
because of optional equipment that
was not purchased on the vehicle,
model variants, country specifications,
features/applications that may not be
available in your region, or changes
subsequent to the printing of this
owner’s manual.
Refer to the purchase documentation
relating to your specific vehicle to
confirm the features.
Keep this manual in the vehicle for
quick reference.
Canadian Vehicle Owners
A French language manual can be
obtained from your dealer, at
www.helminc.com, or from:
Propriétaires Canadiens
On peut obtenir un exemplaire de ce
guide en français auprès du
concessionnaire ou à l'adresse
suivante:
Helm, Incorporated
Attention: Customer Service
47911 Halyard Drive
Plymouth, MI 48170
USA
Using this Manual
To quickly locate information about
the vehicle, use the Index in the back
of the manual. It is an alphabetical
list of what is in the manual and the
page number where it can be found.
Litho in U.S.A.
Part No. 23272680 A First Printing
As with other vehicles of this type,
failure to operate this vehicle correctly
may result in loss of control or a
crash. Be sure to read the driving
guidelines in this manual in the
section called “Driving and Operating”
and specifically Driver Behavior 0 171,
Driving Environment 0 171, and Vehicle
Design 0 171.
Danger, Warning, and
Warning
{
Warning indicates a hazard that
could result in injury or death.
Caution
Caution indicates a hazard that
could result in property or vehicle
damage.
Caution
Warning messages found on vehicle
labels and in this manual describe
hazards and what to do to avoid or
reduce them.
Danger
{
Danger indicates a hazard with a
high level of risk which will result
in serious injury or death.
A circle with a slash through it is a
safety symbol which means “Do Not,”“Do not do this,” or “Do not let this
happen.”
Symbols
The vehicle has components and
labels that use symbols instead of
text. Symbols are shown along with
the text describing the operation or
information relating to a specific
component, control, message, gauge,
or indicator.
M : Shown when the owner’s manual
has additional instructions or
information.
* : Shown when the service manual
has additional instructions or
information.
0 : Shown when there is more
information on another page —“see page.”
Vehicle Symbol Chart
Here are some additional symbols that
may be found on the vehicle and what
they mean. See the features in this
manual for information.
u : Air Conditioning SystemG : Air Conditioning Refrigerant Oil9 : Airbag Readiness Light
This section provides a brief overview
about some of the important features
that may or may not be on your
specific vehicle.
For more detailed information, refer to
each of the features which can be
found later in this owner’s manual.
Stop/Start System
The Stop/Start system will shut off
the engine to help conserve fuel.
It has components designed for the
increased number of starts.
When the brakes are applied and the
vehicle is at a complete stop, the
engine may turn off. When stopped,
the tachometer displays AUTO STOP.
See Tachometer 0 128. When the brake
pedal is released or the accelerator
pedal is pressed, the engine will
restart. See Stop/Start System 0 184.
The automatic engine Stop/Start
feature can be disabled and enabled
by pressing the switch with the
symbol. Auto Stop is enabled each
time you start the vehicle.
h
Remote Keyless Entry
(RKE) System
The Remote Keyless Entry (RKE)
transmitter may be used to lock and
unlock the doors from up to 60 m
(197 ft) away from the vehicle.
Q : Press to lock all doors.K : Press to unlock the driver door or
all doors depending on the vehicle
personalization settings.
Lock and unlock feedback can be
personalized. See VehiclePersonalization 0 147.
Press and hold
sound the panic alarm. Press again to
cancel.
7 for three seconds to
b : Press twice quickly to open or
close the liftgate. Press once to stop
the liftgate from moving.
Press the key release button near the
bottom of the transmitter to remove
the key. Never remove the key without
pressing the button. The key can be
used for the driver door and the
glove box.
See Keys 0 27 and Remote KeylessEntry (RKE) System Operation 0 28.
Remote Vehicle Start
The engine can be started from
outside of the vehicle.
2. Immediately press and hold
for at least four seconds or until
the turn signal lamps flash.
Start the vehicle normally after
entering.
When the vehicle starts, the parking
lamps will turn on.
Remote start can be extended.
Canceling a Remote Start
To cancel a remote start, do one of
the following:
.
Press and hold
parking lamps turn off.
.
Turn on the hazard warning
flashers.
.
Turn the vehicle on and then off.
See Remote Vehicle Start 0 35.
Starting the Vehicle
1. Press and release Q on the RKE
transmitter.
/ until the
/
Door Locks
Keyless Access
Press the button on the door handle
and pull the handle when the Remote
Keyless Entry (RKE) transmitter is
within range. See Remote Keyless Entry(RKE) System Operation 0 28.
Manual Operation
From outside, use the key in the
driver door. The key cylinder is
covered by a cap. See Door Locks 0 36.
From the inside, pull once on the door
handle to unlock it, and again to
open it.
From outside, press Q or K on the
RKE transmitter. See Remote KeylessEntry (RKE) System Operation 0 28.
From inside, press Q or K on the
power door lock switch. See PowerDoor Locks 0 39.
Liftgate
Power Liftgate Operation
The power liftgate switch is on the
driver door. The vehicle must be in
P (Park).
Choose the power liftgate mode by
selecting MAX or 3/4. Press
the driver door. The driver door must
be unlocked. On the RKE transmitter
press
b twice quickly until the
liftgate starts moving.
Press any liftgate button while the
liftgate is moving to stop it. Pressing
again reverses the direction.
8 on
To close, press
the liftgate next to the pull cup.
To disable the power liftgate function,
select OFF on the liftgate switch. See
Liftgate 0 41.
l on the bottom of
Windows
The power windows work when the
ignition is on, in ACC/ACCESSORY,
or when Retained Accessor y Power
(RAP) is active. See Retained AccessoryPower (RAP) 0 187.
Using the window switch, press to
open or pull to close the window.
The windows may be temporarily
disabled if they are used repeatedly
within a short time.
See Power Windows 0 56
Seat Adjustment
.
Raise or lower the entire seat by
moving the rear of the control up
or down.
See Power Seat Adjustment 0 63.
Reclining Seatbacks
Power Seats
.
Tilt the top of the control
rearward to recline.
.
Move the seat forward or rearward
by sliding the control forward or
rearward.
.
Raise or lower the front part of the
seat cushion by moving the front
of the control up or down.
.
Tilt the top of the control forward
to raise.
See Reclining Seatbacks 0 64.
IN BRIEF11
Memory Features
If equipped, memory seats allow two
drivers to save and recall their unique
seat positions for driving the vehicle,
and a shared exit position for getting
out of the vehicle. Other feature
positions may also be saved, such as
power mirrors and power steering
wheel, if equipped. Memory positions
are linked to RKE transmitter 1 or 2
for automatic memory recalls.
Before saving, adjust all available
memory feature positions. Turn the
ignition on and then press and release
SET; a beep will sound. Then
immediately press and hold 1, 2,
or B (Exit) until two beeps sound.
To manually recall these positions,
press and hold 1, 2, or
saved position is reached.
When Seat Entry Memor y is enabled
in vehicle personalization, positions
previously saved to memory buttons
1 and 2 are recalled when the ignition
is changed from off to on or ACC/
ACCESSORY.
When Seat Exit Memory is enabled in
vehicle personalization, the feature
automatically recalls the previously
saved exit position when exiting the
vehicle.
Memory adjustments may not be
available upon delivery or after service
until steps in “Saving Memory
Positions” section are performed. See
Memory Seats 0 65.
B until the
Heated and Ventilated
Seats
Uplevel Buttons Shown, Base Buttons
If equipped, the buttons are near the
climate controls on the center stack.
To operate, the engine must be
running.
J or z to heat the driver or
Press
passenger seat cushion and seatback.
C or { to ventilate the driver
Press
or passenger seat.
Similar
Press the button once for the highest
setting. With each press of the button,
the seat will change to the next lower
setting, and then to the off setting.
The indicator lights above the buttons
indicate three for the highest setting
and one for the lowest. If the front
heated seats are on high, the level
may automatically be lowered after
approximately 30 minutes.
See Heated and Ventilated Front Seats0 68.
Head Restraint Adjustment
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback recline
angle as little as necessar y while
keeping the seat and the head
restraint height in the proper position.
See Head Restraints 0 61 and PowerSeat Adjustment 0 63.
Refer to the following sections for
important information on how to use
seat belts properly:
.
Seat Belts 0 72
.
How to Wear Seat Belts Properly
0 73
.
Lap-Shoulder Belt 0 75
.
Lower Anchors and Tethers for
Children (LATCH System) 0 98
Passenger Sensing System
The passenger sensing system turns
off the front outboard passenger
frontal airbag and knee airbag under
certain conditions. No other airbag is
affected by the passenger sensing
system. See Passenger Sensing System0 86.
The passenger airbag status indicator
will light on the overhead console
when the vehicle is started. See
Adjust the rearview mirror for a clear
view of the area behind your vehicle.
Manual Rearview Mirror
If equipped, push the tab forward for
daytime use and pull it rearward for
nighttime use to avoid glare of the
headlamps from behind.
Automatic Dimming Rearview Mirror
If equipped, automatic dimming
reduces the glare of headlamps from
behind. The dimming feature comes
on when the vehicle is started.
Rear Camera Mirror
If equipped, this automatic dimming
rearview mirror provides a wide angle
camera view of the area behind the
vehicle. For ease of use, adjust the
mirror for a clear view of the area
behind the vehicle while the display is
off. See Rear Camera Mirror 0 53.
Steering Wheel Adjustment
Manual Steering Wheel
To adjust the steering wheel:
1. Pull the lever down.
2. Move the steering wheel up
or down.
3. Pull or push the steering wheel
closer or away from you.
4. Pull the lever up to lock the
steering wheel in place.
Do not adjust the steering wheel while
driving.
Power Tilt and Telescoping Steering
Wheel
Press the control to move the tilt and
telescoping steering wheel up and
down or forward and rearward.
indicator light will turn off. The dome
lamps will come on when doors are
opened.
+ ON/OFF : Press to turn the dome
lamps on manually.
Reading Lamps
There are front and rear reading
lamps on the overhead console and
over the rear passenger doors. These
lamps come on automatically when
any door is opened.
To manually turn the reading lamps
on or off:
IN BRIEF15
Press the lamp lenses over the rear
passenger doors.
For more information on interior
lighting, see Instrument PanelIllumination Control 0 160.
The dome lamp controls are in the
overhead console.
To operate, press the following
buttons:
j OFF : Press to turn off the dome
lamps when a door is open. An
indicator light on the button will turn
on when the dome lamp override is
activated. Press
deactivate this feature and the
j OFF again to
Press the lamp lenses on the front
reading lamps.
Exterior Lighting
The exterior lamp control is on the
turn signal lever.
In Canada, the headlamps will
automatically reactivate when the
vehicle is shifted out of P (Park).
AUTO : Automatically turns the
exterior lamps on and off, depending
on outside lighting.
; : Turns on the parking lamps
including all lamps, except the
headlamps.
5 : Turns on the headlamps together
with the parking lamps and
instrument panel lights.
See:
.
Exterior Lamp Controls 0 156.
.
Turn and Lane-Change Signals
0 159.
Windshield Wiper/Washer
Windshield Wiper with Rainsense
(AUTO Shown), If Equipped
Windshield Wiper without Rainsense
(INT Shown)
With the ignition on or in ACC/
ACCESSORY, move the lever to select
the wiper speed.
HI : Use for fast wipes.
LO : Use for slow wipes.
AUTO : If equipped with Rainsense,
use this setting for intermittent wipes
when Rainsense is disabled,
or Rainsense wipes when Rainsense is
enabled. For intermittent wipes, move
the windshield wiper lever to AUTO.
Turn the band up for more frequent
wipes or down for less frequent wipes.
When Rainsense is enabled, move the
windshield wiper lever to AUTO. Turn
the band to adjust the sensitivity to
moisture to the desired level.
.
Turn the band up for more
sensitivity to moisture.
.
Turn the band down for less
sensitivity to moisture.
.
Move the windshield wiper lever
out of the AUTO position to
deactivate Rainsense.
To turn the Rainsense feature on or
off, see “Rain Sense Wipers” under
Vehicle Personalization 0 147.
INT : If equipped with Intermittent
wipers only, move the windshield
wiper lever to INT. Turn the band up
for more frequent wipes or down for
less frequent wipes.
OFF : Use to turn the wipers off.
1X : For a single wipe, briefly move
the lever down. For several wipes, hold
the lever down.
f : Pull the lever toward you to
spray windshield washer f luid and
activate the wipers.
See Windshield Wiper/Washer 0 117
and Rear Window Wiper/Washer 0 119.
IN BRIEF17
Climate Controls
The climate control buttons on the
center stack and on the climate
control display are used to adjust the
heating, cooling, and ventilation.
If equipped, Tap Shift allows you to
shift an automatic transmission
similar to a manual transmission. To
use the Tap Shift feature:
1. When in D (Drive), pull back on
the shift lever to enter
M (Manual Mode).
2. Use Tap Shift to manually shift
the automatic transmission.
3. To exit, pull back on the shift
lever a second time.
See Manual Mode 0 196.
Vehicle Features
Infotainment System
See the infotainment manual for
information on the radio, audio
players, phone, navigation system, and
voice or speech recognition. It also
includes information on settings.
Steering Wheel Controls
The infotainment system can be
operated by using the steering wheel
controls. See "Steering Wheel
Controls" in the infotainment manual.
Cruise Control
J : Press to turn the system on and
off. A white indicator appears in the
instrument cluster when turned on.
RES+ : If there is a set speed in
memory, push up briefly to resume to
that speed or press and hold to
accelerate. If the cruise control is
already active, use to increase vehicle
speed. To increase speed by 1 km/h
(1 mph), push RES+ up to the first
detent. To increase speed to the next
5 km/h (5 mph) mark on the
speedometer, push RES+ up to the
second detent.
SET− : Push down briefly to set the
speed and activate cruise control.
If the cruise control is already active,
use to decrease vehicle speed. To
decrease speed by 1 km/h (1 mph),
push SET− down to the first detent.
To decrease speed to the next 5 km/h
(5 mph) mark on the speedometer,
push SET− down to the second detent.
* : Press to disengage cruise control
without erasing the set speed from
memory.
See Cruise Control 0 203 or AdaptiveCruise Control 0 206 (if equipped).
Driver Information
Center (DIC)
The DIC display is in the instrument
cluster. It shows the status of many
vehicle systems.
S or T : Press to move between the
interactive display zones in the
cluster. Press
previous menu.
S to go back to the
y or z : Use the thumbwheel to
scroll to the previous or next
selection.
V : Press the thumbwheel to select.
See Driver Information Center (DIC)0 140.
Forward Collision Alert
(FCA) System
If equipped, FCA may help avoid or
reduce the harm caused by front-end
crashes. FCA provides a green
indicator,
detected ahead. This indicator
displays amber when following a
vehicle much too closely. When
approaching a vehicle ahead too
quickly, FCA provides a flashing red
alert on the windshield and rapidly
beeps or pulses the driver seat.
See Forward Collision Alert (FCA)System 0 223.
V, when a vehicle is
Forward Automatic
Braking (FAB)
If the vehicle has For ward Collision
Alert (FCA), it also has FAB, which
includes Intelligent Brake Assist (IBA).
When the system detects a vehicle
ahead in your path that is traveling in
the same direction that you may be
about to crash into, it can provide a
boost to braking or automatically
brake the vehicle. This can help avoid
or lessen the severity of crashes when
driving in a forward gear.
See Forward Automatic Braking (FAB)0 226.
Front Pedestrian Braking
(FPB) System
If equipped, the FPB system may help
avoid or reduce the harm caused by
front-end crashes with nearby
pedestrians when driving in a for ward
gear. FPB displays an amber indicator,
~, when a nearby pedestrian is
detected directly ahead. When
approaching a detected pedestrian too
quickly, FPB provides a red flashing
alert on the windshield and rapidly
beeps or pulses the driver seat. FPB
can provide a boost to braking or
automatically brake the vehicle.
See Front Pedestrian Braking (FPB)System 0 227.
Lane Keep Assist (LKA)
If equipped, LKA may help avoid
crashes due to unintentional lane
departures. It may assist by gently
turning the steering wheel if the
vehicle approaches a detected lane
marking without using a turn signal in
that direction. It may also provide a
Lane Departure Warning (LDW) alert
as the lane marking is crossed. The
system will not assist or alert if it
detects that you are actively steering.
Override LKA by turning the steering
wheel. LKA uses a camera to detect
lane markings between 60 km/h (37
mph) and 180 km/h (112 mph).
See Lane Departure Warning (LDW)
0 231 and Lane Keep Assist (LKA)
0 231.
Lane Change Alert (LCA)
If equipped, the LCA system is a
lane-changing aid that assists drivers
with avoiding lane change crashes
that occur with moving vehicles in the
side blind zone (or spot) areas or with
vehicles rapidly approaching these
areas from behind. The LCA warning
display will light up in the
corresponding outside mirror and will
flash if the turn signal is on. The Side
Blind Zone Alert (SBZA) system is
included as part of the LCA system.
IN BRIEF21
See Side Blind Zone Alert (SBZA) 0 229
and Lane Change Alert (LCA) 0 229.
Surround Vision
If equipped, views around the vehicle
appear in the infotainment display to
aid with parking and low-speed
maneuvers.
See “Surround Vision” under
Assistance Systems for Parking or
Backing 0 216.
Front Vision Camera
If equipped, a view of the area in front
of the vehicle appears on the
infotainment display to aid with
parking and low-speed maneuvers.
See “Front Vision Camera” under
Assistance Systems for Parking or
Backing 0 216.
Rear Vision Camera (RVC)
If equipped, RVC shows a view of the
area behind the vehicle on the
infotainment display when the vehicle
is shifted into R (Reverse) to aid with
parking and low-speed backing
maneuvers.
See Assistance Systems for Parking or
Backing 0 216.
Rear Cross Traffic Alert
The vehicle may also have the Front
Park Assist system.
See Assistance Systems for Parking orBacking 0 216.
(RCTA) System
If equipped, the RCTA system shows a
triangle with an arrow on the
infotainment display to warn of traffic
behind your vehicle that may cross
your vehicle's path while in
R (Reverse). In addition, beeps will
sound, or the driver seat will pulse.
See Assistance Systems for Parking orBacking 0 216.
Park Assist
If equipped, Rear Park Assist (RPA)
uses sensors on the rear bumper to
assist with parking and avoiding
objects while in R (Reverse).
It operates at speeds less than 8 km/h
(5 mph). RPA may show a warning
triangle on the infotainment display
and a graphic on the instrument
cluster to provide the object distance.
In addition, multiple beeps or seat
pulses may occur if very close to an
object.
Automatic Parking
Assist (APA)
If equipped, the APA system helps to
search for and maneuver the vehicle
into parallel or perpendicular parking
spots using automatic steering, DIC
displays, and beeps. When the vehicle
speed is below 30 km/h (18 mph),
press
O to enable the system.
See “Automatic Parking Assist (APA)”
under Assistance Systems for Parkingor Backing 0 216.
Reverse Automatic
Braking (RAB)
If the vehicle has Adaptive Cruise
Control (ACC) it also has the RAB
system, which is designed to help
avoid or reduce the harm caused by
backing crashes when the vehicle is
shifted into R (Reverse). If the system
detects the vehicle is backing too fast
to avoid a crash with a detected object
behind your vehicle in your path, it
may automatically brake hard to
a stop.
See Assistance Systems for Parking orBacking 0 216.
Power Outlets
The accessory power outlets can be
used to plug in electrical equipment,
such as a cell phone or MP3 player.
The vehicle has three accessory power
outlets: one at the front of the center
console, one under the armrest, and
one in the rear cargo area.
If equipped, this system provides a
way to replace up to three remote
control transmitters used to activate
devices such as garage door openers,
security systems, and home
automation devices.
Read the instructions completely
before attempting to program the
Universal Remote system. Because of
the steps involved, it may be helpful
to have another person available to
assist with programming the Universal
Remote system.
See Universal Remote System 0 152.
Sunroof
If equipped, the ignition must be on
or in ACC/ACCESSORY, or Retained
Accessory Power (RAP) must be active
to operate the sunroof.
See Ignition Positions 0 182 and
Retained Accessory Power (RAP) 0 187.
1. Sunroof Switch
2. Sunshade Switch
IN BRIEF23
Sunroof Express Operation : Press
and release
release again to move to the partially
opened comfort stop position. Press
and release again to express-open to
the fully opened position. Press and
release
movement. Press and release
to express-close. Press and release
e (1) to vent. Press and
e (1) at any time to stop
g (1)
g (1) at any time to stop
movement.
Sunroof Manual Operation : The
sunroof can change to manual mode
by holding
sunroof will now open as long as
(1) is held. Press and release e (1)
again to change back to express
operation.
Power Sunshade Express
Operation : Press and release
to express-open the sunshade. Press
and release
movement. Press and release
Power Sunshade Manual
Operation : The sunshade can change
to manual mode by holding
while opening. The sunshade will now
open as long as
and release
back to express operation.
The sunroof cannot be opened or
closed if the vehicle has an electrical
failure.
The sunroof and power sunshade are
equipped with an automatic reversal
system. See Sunroof 0 58.
C (2) is held. Press
C (2) again to change
C (2)
Performance and
Maintenance
Traction Control/Electronic
Stability Control
The Traction Control System (TCS)
limits wheel spin. The system turns
on automatically every time the
vehicle is started.
The StabiliTrak/Electronic Stability
Control (ESC) system assists with
directional control of the vehicle in
difficult driving conditions. The
system also turns on automatically
every time the vehicle is started.
.
To turn off TCS, press and release
g on the center console behind
the shift lever.
instrument cluster and a Driver
Information Center (DIC) message
may display.
.
To turn off both TCS and
StabiliTrak/ESC, press and hold
until i and g come on in the
instrument cluster and a DIC
message may display.
i comes on in the
.
Press and release
on both systems.
See Traction Control/Electronic StabilityControl 0 201.
Tire Pressure Monitor
This vehicle may have a Tire Pressure
Monitor System (TPMS).
The low tire pressure warning light
alerts to a significant loss in pressure
of one of the vehicle's tires. If the
warning light comes on, stop as soon
as possible and inf late the tires to the
recommended pressure shown on the
Tire and Loading Information label.
See Vehicle Load Limits 0 178. The
warning light will remain on until the
tire pressure is corrected.
g
The low tire pressure warning light
may come on in cool weather when
the vehicle is first started, and then
turn off as the vehicle is driven. This
may be an early indicator that the tire
pressures are getting low and the tires
need to be inf lated to the proper
pressure.
The TPMS does not replace normal
monthly tire maintenance. Maintain
the correct tire pressures.
See Tire Pressure Monitor System0 287.
Tire Fill Alert (If Equipped)
This feature provides visual and
audible alerts outside the vehicle to
help when inflating an underinflated
tire to the recommended cold tire
pressure. See “Tire Fill Alert (If
Equipped)” under Tire Pressure MonitorOperation 0 288.
Fuel
Premium Recommended
Use premium 93 octane — (R+M)/2 —
unleaded gasoline in your vehicle. TOP
TIER Detergent Gasoline is
recommended. Unleaded gasoline with
an octane rating as low as 87 may be
used, but it will reduce performance
and fuel economy. See RecommendedFuel 0 234.
E85 or FlexFuel
No E85 or FlexFuel
Gasoline-ethanol fuel blends greater
than E15 (15% ethanol by volume),
such as E85, cannot be used in this
vehicle.
Engine Oil Life System
The engine oil life system calculates
engine oil life based on vehicle use
and displays the CHANGE ENGINE
IN BRIEF25
OIL SOON message when it is time to
change the engine oil and filter. The
oil life system should be reset to 100%
only following an oil change.
Resetting the Oil Life System
1. Using the DIC controls on the
right side of the steering wheel,
display REMAINING OIL LIFE on
the DIC. See Driver InformationCenter (DIC) 0 140. When
remaining oil life is low, the
CHANGE ENGINE OIL SOON
message will appear on the
display.
2. Press
See Engine Oil Life System 0 256.
V on the DIC controls and
hold down for a few seconds to
clear the CHANGE ENGINE OIL
SOON message and reset the oil
life at 100%.
Be careful not to reset the oil life
display accidentally at any time
other than after the oil is
changed. It cannot be reset
accurately until the next oil
change.
Leaving children in a vehicle with a
Remote Keyless Entry (RKE)
transmitter is dangerous and
children or others could be
seriously injured or killed. They
could operate the power windows
or other controls or make the
vehicle move. The windows will
function with the RKE transmitter
in the vehicle, and children or
others could be caught in the path
of a closing window. Do not leave
children in a vehicle with an RKE
transmitter.
If equipped with remote folding
mirrors, press and hold
one second to remotely fold the
mirrors, if enabled. See VehiclePersonalization 0 147.
K : Press to unlock the driver door.
Press
K again within five seconds to
unlock all doors. The RKE transmitter
can be programmed to unlock all
doors on the first button press. See
Vehicle Personalization 0 147.
With Power Liftgate Shown, Without
Similar
Q : Press to lock all doors. The turn
signal indicators may flash and/or the
horn may sound on the first press to
indicate locking. See VehiclePersonalization 0 147.
If the driver door is open when
pressed, all doors will lock and the
driver door will immediately unlock,
if Open Door Anti-Lockout is enabled.
See Vehicle Personalization 0 147.
If the passenger door is open when
is pressed, all doors lock.
Pressing
system. See Vehicle Alarm System 0 49.
Q may also arm the alarm
Q is
The turn signal indicators may flash
to indicate unlocking. See VehiclePersonalization 0 147. When remotely
unlocking the vehicle at night, the
lights come on brief ly to light your
approach to the vehicle.
Pressing
system. See Vehicle Alarm System 0 49.
If equipped with remote folding
mirrors, press and hold
one second to remotely unfold the
mirrors, if enabled. See Vehicle
Q
Personalization 0 147.
K will disarm the alarm
Q for
K for
KEYS, DOORS, AND WINDOWS29
Press and hold
fully open. Windows will not operate
unless remote window operation is
enabled. See Vehicle Personalization0 147.
K until the windows
/ : Press and release Q and then
immediately press and hold
least four seconds to start the engine
from outside the vehicle using the
RKE transmitter. See Remote VehicleStart 0 35.
/ for at
7 : Press and release one time to
initiate vehicle locator. The exterior
lamps flash and the horn chirps three
times. Press and hold
three seconds to sound the panic
alarm. The horn sounds and the turn
signal lamps flash for 30 seconds,
or until
vehicle is started.
7 is pressed again or the
7 for
b : If equipped, press twice quickly
to open or close the liftgate.
Press once to stop the liftgate from
moving.
Loading...
+ 345 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.