ConvenienCe/Personalizati o n Gu i d e
2015
2
Cruise Control/
Voice Recognition/
Heated Steering
Wheel Buttons
Instrument Panel
Illumination Control/
Exterior Lamp
Control
Head-Up
Display
Controls♦
Windshield
Wipers Lever
Audio Steering
Wheel Controls/
5-way Control
Power Tilt/
Telescope
Steering Wheel
Control
Instrument
Cluster/Driver
Information
Center
Engine Start/
Stop Button
4WD
Control
Review this guide for an overview of some important features in your Cadillac Escalade. Some optional equipment (denoted by ♦) described
in this guide may not be included in your vehicle. More detailed information can be found in your Owner Manual.
INSTRUMENT PANEL
CUE
Touch
Screen
Heated/
Cooled Seat
Buttons
Audio
System
Controls
Climate
Controls
Power Assist
Steps♦/Adjustable
Pedals/Magnetic
Ride Control Buttons
Glove Box/Parking
Assist/Lane
Departure Warning♦/
Traction Control and
StabiliTrak Buttons
Power Mirror
Control/Door
Lock Switch/
Window Buttons
3
REMOTE KEYLESS ENTRY
TRANSMITTER (KEY FOB)
Lock
Press to lock all doors.
Unlock
Press to unlock the driver’s door.
Press again to unlock all doors.
Note: To change the Remote Keyless Entry
settings, go to Remote Lock, Unlock, Start in the Vehicle Settings menu.
Liftglass
Press twice to open the liftglass.
Power Liftgate
Press twice to open or close the power liftgate.
Remote Start
Use to start the engine from outside the vehicle. See Adaptive
Remote Start on page 4.
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle. The turn signal lamps
ash and the horn sounds.
Press and hold for 3 seconds to activate the alarm. The turn
signal lamps ash and the horn sounds for 30 seconds or until
the button is pressed again.
Door Key
Press the button (A) on the side of the transmitter to pull the door
key out of the transmitter. Use the key to lock/unlock the driver’s
door if needed.
See Keys, Doors and Windows in your Owner Manual.
KEYLESS ACCESS SYSTEM
The Keyless Access System enables operation of the doors,
liftgate and ignition without removing the Remote Keyless Entry
transmitter from your pocket or purse. The transmitter must be
within 3 feet of the door being unlocked or the liftgate.
Keyless Unlocking
With the transmitter within range:
Press the lock button on the driv-
er’s door handle to unlock the
driver’s door; press it again within
5 seconds to unlock all doors.
Press the lock button on a
passenger door handle to unlock
all doors.
Press the touch pad on the liftgate handle to open the
power liftgate.
Keyless Locking
With the ignition off, the transmitter out of the vehicle, and all
doors closed:
Press the lock button on any door handle to lock all doors
immediately.
If Passive Locking is turned on, all doors will lock automatically
after a short delay once all doors are closed.
Note: To change the door lock and unlock settings, go to Remote Lock,
Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
A
4
PUSHBUTTON START
Start
With the vehicle in Park or
Neutral, press the brake pedal
and then press the ENGINE
START/STOP button to start the
engine. The green indicator on
the button will illuminate.
Note: The Remote Keyless Entry
transmitter must be in the vehicle to
turn on the ignition. If the transmitter
battery is weak, place the transmitter
in the pocket in the center console
storage compartment to enable the
engine to start. Replace the transmitter
battery as soon as possible.
Stop/Off
Shift to Park and press the
ENGINE START/STOP button to turn off the engine.
Power will be available for 10 minutes to operate the audio system
until the driver’s door is opened and to operate the windows and
sunroof♦ until any door is opened.
Accessory
With the engine off and the brake pedal NOT depressed, press
the ENGINE START/STOP button to place the ignition system
in the Accessory mode. The yellow indicator on the button will
illuminate.
See Driving and Operating in your Owner Manual.
ADAPTIVE REMOTE START
Starting the Vehicle
1. Press and release the Lock button on the Remote Keyless
Entry transmitter.
2. Immediately press and hold the Remote Start button until
the turn signal lamps ash (about 4 seconds).
When the vehicle starts, the doors remain locked and the park-
ing lamps will light and remain on while the engine is running.
The engine will continue running for 10 minutes. Repeat these
steps for a 10-minute time extension. Remote start can be
extended only once.
3. Before driving, press the brake pedal and then press the
ENGINE START/STOP button to turn on the ignition.
Canceling a Remote Start
Press and hold the Remote Start button until the parking
lamps turn off.
Heated/Cooled Seat Operation
The heated/cooled seats will turn on during a remote start
(if selected in the Vehicle Settings menu) when outside tem -
p eratures warrant. The seat button indicators do not illuminate
during a remote start.
Note: To change the heated/cooled seat settings, go to Remote Lock,
Unlock, Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
Voice Recognition
Push to Talk
Press to interact with the OnStar, Bluetooth or CUE system. Wait
for the beep before speaking.
End Call/Mute
Press to end/decline a call or mute the audio system.
See Instruments and Controls in your Owner Manual.
5-Way Control
Moves left/right, up/down, and in.
Left/Right
Press to move between the display
zones on the instrument cluster. Press the
left to exit a center display menu.
Up/Down
Press the control bar up or down to scroll through a menu.
SEL Select
Press to select a highlighted menu item.
See Instruments and Controls in your Owner Manual.
Audio Controls
+ – Volume
Press the + or – to increase or decrease the volume.
Next/Previous
Press or to go to the next or previous favorite radio station
or track.
See your CUE Infotainment System Manual.
Cruise Control
On/Off
On/Off (Adaptive Cruise Control♦)
SET Set Speed
With Cruise Control on, press the control
bar down fully to set the cruise speed.
RES Resume Speed
With Cruise Control on, press the control bar up fully to resume the
previous set speed.
+ – Adjust Speed
When active, press the control bar up (+) or down (–) lightly to
increase or decrease the set speed by 1-mph increments; press
up or down fully to increase or decrease the set speed to the next
5-mph interval on the speedometer.
Cancel
Press to cancel cruise control without erasing the set speed
from memory.
Follow Distance Gap (Adaptive Cruise Control♦)
Forward Collision Alert♦
Press repeatedly to set a following gap of Far, Medium, or Near.
See Adaptive Cruise Control on page 15.
See Driving and Operating in your Owner Manual.
Heated Steering Wheel
On/Off
See Instruments and Controls in your Owner Manual.
5
STEERING WHEEL CONTROLS
♦ Optional equipment
6
INSTRUMENT CLUSTER
Cluster Display Zones
Use the 5-way control on the steering wheel to move between the different display zones (A) and scroll through
the different menus in each cluster conguration.
Cluster Congurations
1. Use the ve-way control on the steering wheel to view the Settings page (B) in one of the display zones
on the cluster.
2. Press SEL (Select) to enter the Settings menu.
3. Scroll down to highlight Display Layout; press SEL.
4. Scroll up or down to highlight one of four cluster congurations: Simple, Performance, Balanced, or Enhanced; press SEL.
5. Press to exit the menu.
See Instruments and Controls in your Owner Manual.
A
B
A
Performance conguration shown.
Loading...