Page 1
OWNER’S MANUAL
BTM-1
Bluetooth
ADAPTER
www.cadencesound.com
Copyright by Cadence Acoustics LTD.
Though we tried our ensure that this manual is free and clear of errors please don’t hold
us responsible for printing errors.//
INSTALLATION
(MODE 1“Handlebar Mount”)
INSTALLATION
(MODE 2“Push-Fixed in Mount”)
1. Install “P” shaped clamp
or “Z” shaped bracket threaded
(item#5) on to the Bluetooth
controller hook. (packed with
Bluetooth controller). Use the
provided bolt to fix on the
handlebar. The provided foam
rubber pad can be used to
accomplish tight and secure
mounting.
2. Slide the Bluetooth
controller into the hook
3. Press down the Bluetooth
controller hook and then slide
out the Bluetooth controller
box at the same time to
remove the Bluetooth
controller
4
Page 2
BTM-1
The Cadence Bluetooth Adapter pairs with any Bluetooth enabled
device and allows it to serve as the source unit in a mobile system
Thank you for purchasing this Cadence Bluetooth Adapter.
1. BTM-1
2. 3.5mm Auxiliary input cable
3. Ring terminals
4. Easy router template
5. Mounting hardware
6. Industrial foam
rubber
pad
FEATURES
WHAT IS INCLUDED?
1
6
5
3
4
1 3
Wiring Diagram
Red
Black
+
-
Line out R (Red)
Line out L (White)
Line in R (Red)
Line in from Head Unit or
Other Aux-In Device
Line out to Amplifier
Line in L (White)
Battery
Playing Music:
3. Press to start or pause the music
shortly for control the red background light
4. Press shortly for next track
Press shortly for Previous track
5.
6. Press shortly for volume up
7. Press shortly for volume down
1. Press
Press
2.
2.
Press and Hold
3.
5.
6.
When Bluetooth is disconnected or the 3.5mm AUX Input is plugged in, the
power indicator will glow red.
Bluetooth Pairing and Connection:
NFC Pairing and Connection:
1.
Connect Bluetooth controller box to your device
1.
Have your device touch the NFC tag on the controller and then you will
receive the notification to require password
2.
Enter the password
“ 2277 ”
to turn on the Bluetooth. (This is only for the first
time connection, no need to enter password when connect NFC again)
3.
After turn on the Bluetooth function by NFC, the operation procedure is
same as the above “ Bluetooth Pairing and Connection”
4.
Touch the NFC tag again to turn off the Bluetooth function.
for three seconds until power indicator lights (red)
The system will automatically go into pairing mode The power indicator will
turn red for about 4-6 seconds and then alternating red and blue (Bluetooth
blue Power red) Please be sure that Bluetooth is turned on your device and
Select CAdENCE BTM-1 on your device to connect Bluetooth controller
(if the Bluetooth controller is connected, the light will turn blue and not flash)
When the device is out of Bluetooth range, Bluetooth will be disconnected
4.
Bluetooth password “ 2277 ”
automatically and automatically reconnect when detected in range again.
(If not please just repeat steps 1 and 2)
2
Play / Pause Previous Track Volume Down
Next Track
On/Off &
Background Light Volume Up
AUX Input
NFC Tag
Position
2
Connects to all amplifiers with RCA inputs this eliminates the
need for a pricy head unit
3.5mm Auxiliary input jack for use with non-Bluetooth devices
Auxiliary RCA inputs
Simple to use NFC Bluetooth configuration
Sealed for outdoor applications such as ATVs/Motorcycles /Marine
and Watercraft /Golf carts and many more
Easily Mounts on to handlebars,in dash or consoles.
Easy router template guide for flush to surface mounting
Raised backlit buttons for low light conditions
Size :3.82"(l)x2.13"(w)x1.14"(d)
Loading...