Page 1
Features
• Allows faster
box and conduit
mounting
• Adjustable for
non-standard stud
spacing
• Requires only a
screw gun for
installation
Compatible with
•
1-1/2” or 2-1/8”
boxes
•
Works with a
variety of CADDY®
fasteners
TSGB
Telescopic Screw Gun Bracket
The unique, one-piece, break-apart design of the TSGB Telescopic Screw
Gun Bracket makes mounting multiple boxes easier than ever. Requiring
only a screw gun for installation, the TSGB, part of the CADDY® line from
ERICO®, is adjustable to allow non-standard stud spacing. It can mount
multiple 1-1/2” or 2-1/8” boxes on the face or on the inside of the stud.
The brackets feature an improved design with stamped markings to allow
convenient identifi cation and bending. The notches and markings enable
faster and more precise box and conduit mounting between the studs.
Pilot holes allow easy box attachment with only a screwdriver. The box
attaches easily with self-tapping screws Part SMS8, low-profi le screw, is
recommended. Cables and conduit attach to the TSGB brackets with
CCS812 conduit support.
Page 2
TSGB Installation
TSGB
Telescopic Screw Gun Bracket
Specifications
Part
Number
TSGB16 Telescopic Screw Gun Bracket 11 – 18 1-1/2 – 2-1/8 – – 50
TSGB24 Telescopic Screw Gun Bracket 17 – 26 1-1/2 – 2-1/8 – – 50
SMS8 Screw – – – – – – 1000
CCS812 Conduit Support – – – –
812M Conduit Clip – – – – 1/2 - 3/4 100
Description
SMS8 Screw 812M
Stud Spacing
(in)
Box Depth
(in)
Diameter
(in)
1/2 or 3/4 EMT
1/2 RIGD
Quantity
100
WARNING – ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from
your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction,
property damage, serious bodily injury and death.
Copyright ©2008 ERICO International Corporation. All rights reserved.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
Phone: 1-440-248-0100
Fax: 1-440-248-0723
www.erico.com
F797S-NAEN F1137LT07NAEN 00720M8
Loading...