PROJECT:
ITEM NO:
LOCATION:
General Specifications
Utility Caddy to be Caddy Corporation model
_________________.
Frame to be of 1" O.D. 16 gauge stainless steel tubing. Unit
to have two shelves. Shelves to be 18 gauge stainless steel
with raised rounded edges on all sides, flanged down to
form a 1
1
2
" wide channel. Shelf corners shaped to fit
contour of tubular frame and continuously welded to each
leg at all contact points which eliminates unsanitary
crevices. Both shelves to be reinforced with stainless steel
channels.
Casters to be 4" diameter heavy-duty swivel type with
3
4
"
stems and polyurethane tires.
page 1 of 1
All specifications subject to change without notice
Utility Caddys
All-Purpose Trucks
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
T-202-A
T-203-A
T-204-A
T-202-A
T-202-C
T-202-C
Unit to be provided with the following accessories:
Accessories
ACC-38 - Circular bumpers. (Add 4" to length and width)
ACC-63 - 5" diameter swivel casters with polyurethane tires
in lieu of 4" diameter swivel casters. (Add 1
1
8
" to height)
ACC-41 - Caster brakes on two diagonal casters.
PL-1520 - 15" x 20" x 5" plastic tote box for napkin
wrapped silverware.
General Specifications
Correctional Utility Caddy to be Caddy Corporation model
T-202-C.
Frame to be of 1
1
4
" O.D. 16 gauge stainless steel tubing
reinforced with 12 gauge stainless steel corner gussets. Unit
to have two shelves. Shelves to be 12 gauge stainless steel
with 1" raised edge on three sides and 1" turned down edge
on the front. Shelves and gussets to be continuously
welded at corners which eliminates unsanitary crevices.
Both shelves to be reinforced with 12 gauge stainless steel
channels. Unit to have a 1
1
4
" O.D. 16 gauge stainless steel
tubular handle at each end that wraps around the rear
creating a back stop.
Casters to be 8" diameter heavy-duty, semi-pneumatic,
modulus-type tread. Two to be swivel type and two to be
rigid type. Swivel type casters to be provided with foot
brakes.
Correctional Utility Caddy
08/08
T-203-A
T-204-A
T-202-B
T-203-B
T-204-B
T-202-B
T-203-B
T-204-B