CADDY CORPORATION
Air SystemsFood Service Equipment
Self Leveling
Dispensers
PROJECT:
ITEM NO:
LOCATION:
General Specifications
Caddymagic self-leveling drop-in dispenser to be Caddy
Corporation model CM-_______________.
Self-leveling cylinders to be field adjustable without the use
of tools for china and plastic dishes without requiring prior
identification, irrespective of weight, height, or brand.
Calibrating mechanism to have multiple extension springs
peripherally suspended from a circular storage bank.
Selective engaging of springs with dish carrier assembly to
permit balancing and dispensing of any load within range of
model selected. Dispenser housing to consist of an 18
gauge stainless steel die-stamped reinforced base, three
equally spaced vertical stainless steel. guides with raised
beads to minimize friction, and 18 gauge stainless steel
raised top flange, in high luster finish, with three 3" high
plastic guide posts equally spaced, all unitized into one
welded rigid cylindrical assembly. Unit to be 27
1
2
" in
height*. Internal dish carrier assembly to consist of
die-stamped 20 gauge stainless steel removable top
platform supported by a wire cage made of
3
16
" diameter
stainless steel securely stabilized for its vertical travels.
Stack height of dish ware to midpoint of guide post to be not
less than 22". Shielded models to have 22 gauge stainless
steel cylindrical enclosure.
CM-10
CM-10-S
CM-10-H
*** Actual capacities vary with shape of object to be dispensed.
**** For application in heated compartments, cabinets, or counters, Open types must
be specified
CM-10
CM-20
CM-30
CM-40
CM-50
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model
(Open) ****
Dish/Bowl Dia.
8
3
8
"
Countertop
Cutout
Dia.
9
5
8
"
Flange
Outside
Dia.
Unit to be provided with the following accessories:
Accessories
All specifications subject to change without notice
Self-leveling Dispensers
Drop-In Style for
Plates, Bowls, Saucers, Cups & Glasses
9
7
8
" 11
1
8
"
11
3
4
" 13
1
8
"
12
3
4
" 14"
14
1
2
" 15
3
4
"
CM-10-S
CM-20-S
CM-30-S
CM-40-S
CM-50-S
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model
(Shielded)
(Unheated)
Dish/Bowl Dia.
Countertop
Cutout
Dia.
Flange
Outside
Dia.
CM-10-H
CM-20-H
CM-30-H
CM-40-H
CM-50-H
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model
(Shielded)
(Heated)
Dish/Bowl Dia.
Countertop
Cutout
Dia.
Flange
Outside
Dia.
CM-50-H-TS
* Height excludes guide posts. Add 3" for overall height.
CM-50-TS 12" 14
1
2
" CM-50-S-TS
** Outlet not supplied by Caddy Corporation.
Volts Phase
Amps
Watts
Plug
Outlet **
NEMA
Electrical Data
4.2
4.2
4.2
8.8
8.8
120 2.9 350
1
5-15R
ACC-24 - Set of nine stainless steel cup and glass trays.
(Supplied standard for models CM-50-TS, CM-50-S-TS,
& CM-50H-TS)
5-15P
500
500
500
650
5-15R5-15P
5-15R5-15P
5-15R5-15P
5-15R5-15P
5-15R5-15P650
1
1
1
1
1
120
120
120
120
120
12"
12"
8
3
8
"
9
7
8
"
11
3
4
"
12
3
4
"
14
1
2
"
14
1
2
"
8
3
8
"
9
7
8
"
11
3
4
"
12
3
4
"
14
1
2
"
14
1
2
"
CM-20
CM-20-S
CM-20-H
CM-30
CM-30-S
CM-30-H
CM-40
CM-40-S
CM-40-H
CM-50 CM-50-TS
CM-50-S CM-50-TS-S
CM-50-H CM-50-TS-H
15
3
4
"
9
5
8
"
11
1
8
"
13
1
8
"
14"
15
3
4
"
15
3
4
"
9
5
8
"
11
1
8
"
13
1
8
"
14"
15
3
4
"
15
3
4
"
Capacity: up to 72 plates or 36 bowls (72 cups or 40 glasses with ACC-24) ***
Electrical components to consist of top mounted on/off
switch, pilot light and knob adjustable thermostat.
Thermostat to be bi-metallic, adjustable cycling type to
maintain selected level of temperature with minimum
fluctuations. Heating elements to be tubular, stainless steel,
sheathed hi-intensity loop type. A rubber-jacketed cord with
three-prong male plug to be furnished. Entire dispenser to
be wired for 120 volt A.C. single phase operation.
Heated units only to be
R
R
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
page 1 of 1
PROJECT:
ITEM NO:
LOCATION:
Self-leveling Dispensers for
Plates, Bowls, & Saucers (Heated)
General Specifications
Caddymagic self-leveling dispenser to be Caddy
Corporation model CM-_______________.
Unit to have 16 gauge stainless steel top with 2" turned
down channel edge on 4 sides and welded finished corners.
Exterior of cabinet to be finished in stainless steel.
Self-leveling cylinders to be field adjustable without the use
of tools for china dishes without requiring prior identification,
irrespective of weight, height, or brand. Calibrating
mechanism to have multiple extension springs peripherally
suspended from a circular storage bank. Selective engaging
of springs with dish carrier assembly to permit balancing and
dispensing of any load within range of model selected.
Cylinders to have 18 gauge stainless steel raised top flange,
in high luster finish, with three 3" high plastic guide posts
equally spaced.
Bottom of cabinet to be 12 gauge stainless steel, rust
resistant metal and body to have full height vertical plastic
corner bumpers. Casters are to be 4" diameter swivel type
with polyurethane tires. Casters on diagonal corners to be
provided with foot brakes.
CM-S-102-H
to
CM-S-502-H
* Height excludes flange & guide posts. Add 3
1
4
" for overall height.
** Actual capacities vary with shape of object to be dispensed.
CM-S-102-H
CM-S-202-H
CM-S-302-H
CM-S-402-H
CM-S-502-H
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
23
1
2
"
Length
16"
Width
34" *
Height
23
1
2
" 16" 34" *
29
1
4
" 16" 34" *
29
1
4
" 16" 34" *
33" 16
1
2
" 34" *
Two Dispenser Capacity up to 144 plates or 72 bowls **
CM-S-103-H
CM-S-203-H
CM-S-303-H
CM-S-403-H
CM-S-503-H
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
35
1
4
"
Length
16"
Width
34" *
Height
16" 34" *
16" 34" *
16" 34" *
16
1
2
" 34" *
Three Dispenser Capacity up to 216 plates or 108 bowls **
35
1
4
"
43
7
8
"
43
7
8
"
49
1
2
"
CM-SQ-103-H
CM-SQ-203-H
CM-SQ-303-H
CM-SQ-403-H
CM-SQ-503-H
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
23
1
2
"
Length
Width
34" *
Height
34" *
34" *
34" *
34" *
Three Dispenser Capacity up to 216 plates or 108 bowls **
23
1
2
"
23
1
2
" 23
1
2
"
29
1
4
" 29
1
4
"
29
1
4
"
33"33"
29
1
4
"
CM-S-104-H
CM-S-204-H
CM-S-304-H
CM-S-404-H
CM-S-504-H
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
23
1
2
"
Length
Width
34" *
Height
34" *
34" *
34" *
34" *
Four Dispenser Capacity up to 288 plates or 144 bowls **
23
1
2
"
23
1
2
" 23
1
2
"
29
1
4
" 29
1
4
"
29
1
4
"
33"33"
29
1
4
"
CM-S-103-H
to
CM-S-503-H
CM-SQ-103-H
to
CM-SQ-503-H
CM-S-104-H
to
CM-S-504-H
Electrical control box to be stainless steel and installed for
easy removal for service. Control box to be furnished with
on/off switch, pilot light with infinite Hi-Lo heat control for
temperature settings 1 through 9, and a recessed male
three-pronged NEMA twist-lock receptacle. Unit to be
supplied with a 6'-0" long cord with a NEMA twist-lock female
connector at one end and a three prong male plug at the
other end. Heating elements of stainless steel, hi-intensity.
Unit to be provided with the following accessories:
Accessories
ACC-63 - 5" diameter swivel casters with polyurethane tires
in lieu of 4" diameter swivel casters. (Add 1
1
8
" to height)
ACC-50 - Perimeter bumpers with replaceable corner
bumpers. (Add 1
1
4
" to length and width)
ACC-52 - Vertical corner bumpers only. Easy to replace.
(Add 1
1
4
" to length and width)
ACC-56 - Lexan (polycarbonate) covers
page 1 of 2
R
All specifications subject to change without notice
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
&KLQDSODWHVKHDWWRLQDSSUR[LPDWHO\KRXUV
08/08
PROJECT:
ITEM NO:
LOCATION:
Self-leveling Dispensers for
Plates, Bowls, & Saucers (Heated)
* Outlet not supplied by Caddy Corporation.
CM-S-102-H
CM-S-202-H
CM-S-302-H
CM-S-402-H
CM-S-502-H
120
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
208
240
7.9 950 5-15P
4.6
4.0
Electrical Data
1
1
1
950
950
6-15P
6-15P
5-15R
6-15R
6-15R
CM-S-103-H
CM-S-203-H
CM-S-303-H
CM-S-403-H
CM-S-503-H
120
208
240
7.9 950 5-15P
4.6
4.0
1
1
1
950
950
6-15P
6-15P
5-15R
6-15R
6-15R
CM-SQ-103-H
CM-SQ-203-H
CM-SQ-303-H
CM-SQ-403-H
CM-SQ-503-H
208
240
4.6
4.0
1
1
950
950
6-15P
6-15P
6-15R
6-15R
120 7.9 950 5-15P15-15R
CM-S-104-H
CM-S-204-H
CM-S-304-H
CM-S-404-H
CM-S-504-H
208
240
6.0
4.2
1
1
1240
1240
6-15P
6-15P
6-15R
6-15R
120 10.0 1240 5-15P15-15R
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
Electrical Data
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
Electrical Data
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
Electrical Data
CM-S-102-H
to
CM-S-502-H
CM-S-103-H
to
CM-S-503-H
CM-SQ-103-H
to
CM-SQ-503-H
CM-S-104-H
to
CM-S-504-H
TOP VIEW FRONT VIEW
* Outlet not supplied by Caddy Corporation.
* Outlet not supplied by Caddy Corporation.
* Outlet not supplied by Caddy Corporation.
R
All specifications subject to change without notice
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
page 2 of 2
PROJECT:
ITEM NO:
LOCATION:
Self-leveling Dispensers for
Plates, Bowls, & Saucers (Unheated)
General Specifications
Caddymagic self-leveling dispenser to be Caddy
Corporation model CM-_______________.
Unit to have 16 gauge stainless steel top with 2" turned
down channel edge on 4 sides and welded finished corners.
Exterior of cabinet to be finished in stainless steel.
Self-leveling cylinders to be field adjustable without the use
of tools for china and plastic dishes without requiring prior
identification, irrespective of weight, height, or brand.
Calibrating mechanism to have multiple extension springs
peripherally suspended from a circular storage bank.
Selective engaging of springs with dish carrier assembly to
permit balancing and dispensing of any load within range of
model selected. Cylinders to have 18 gauge stainless steel
raised top flange, in high luster finish, with three 3" high
plastic guide posts equally spaced.
Bottom of cabinet to be 12 gauge stainless steel, rust
resistant metal and body to have full height vertical plastic
corner bumpers. Casters are to be 4" diameter swivel type
with polyurethane tires.
CM-S-102
to
CM-S-502
* Height excludes flange & guide posts. Add 3
1
4
" for overall height.
** Actual capacities vary with shape of object to be dispensed.
CM-S-102
CM-S-202
CM-S-302
CM-S-402
CM-S-502
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
23
1
2
"
Length
16"
Width
34" *
Height
23
1
2
" 16" 34" *
29
1
4
" 16" 34" *
29
1
4
" 16" 34" *
33" 16
1
2
" 34" *
Two Dispenser Capacity up to 144 plates or 72 bowls **
CM-S-103
CM-S-203
CM-S-303
CM-S-403
CM-S-503
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
35
1
4
"
Length
16"
Width
34" *
Height
16" 34" *
16" 34" *
16" 34" *
16
1
2
" 34" *
Three Dispenser Capacity up to 216 plates or 108 bowls **
35
1
4
"
43
7
8
"
43
7
8
"
49
1
2
"
CM-SQ-103
CM-SQ-203
CM-SQ-303
CM-SQ-403
CM-SQ-503
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
23
1
2
"
Length
Width
34" *
Height
34" *
34" *
34" *
34" *
Three Dispenser Capacity up to 216 plates or 108 bowls **
23
1
2
"
23
1
2
" 23
1
2
"
29
1
4
" 29
1
4
"
29
1
4
"
33"33"
29
1
4
"
CM-S-104
CM-S-204
CM-S-304
CM-S-404
CM-S-504
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
23
1
2
"
Length
Width
34" *
Height
34" *
34" *
34" *
34" *
Four Dispenser Capacity up to 288 plates or 144 bowls **
23
1
2
"
23
1
2
" 23
1
2
"
29
1
4
" 29
1
4
"
29
1
4
"
33"33"
29
1
4
"
CM-S-103
to
CM-S-503
CM-SQ-103
to
CM-SQ-503
CM-S-104
to
CM-S-504
Unit to be provided with the following accessories:
Accessories
ACC-63 - 5" diameter swivel casters with polyurethane tires
in lieu of 4" diameter swivel casters. (Add 1
1
8
" to height)
ACC-41 - Caster brakes on two diagonal casters.
ACC-50 - Perimeter bumpers with replaceable corner
bumpers. (Add 1
1
4
" to length and width)
ACC-52 - Vertical corner bumpers only. Easy to replace.
(Add 1
1
4
" to length and width)
All specifications subject to change without notice
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
page 1 of 1
PROJECT:
ITEM NO:
LOCATION:
General Specifications
Caddymagic self-leveling dispenser to be Caddy
Corporation model CM-_______________.
Unit to have 16 gauge stainless steel top with 2" turned
down channel edge on 4 sides and welded finished corners.
Exterior of cabinet to be stainless steel. Cabinet corners to
be reinforced with 16 gauge stainless steel channels and to
have full height extruded plastic vertical bumpers.
Bottom of cabinet to be 12 gauge stainless steel, rust
resistant metal and to have 2
1
2
" diameter center clean-out
hole with a removable plug. Unit to be mounted on four 4"
diameter swivel type casters with polyurethane tires.
Self-leveling mechanism to be cantilevered suspension type.
Removable panel to be provided to permit easy calibration
without the use of tools, for full load factors from 20 to 182
pounds and without prior identification of wares, irrespective
of weight, height, or brand. Mechanism to be free of cables,
chains, pulleys, sprockets, gears, levers, crank handles or
components requiring periodic maintenance and lubrication.
Removable load platform to be 18 gauge stainless steel and
secured to 16 gauge stainless steel angle support frame and
a pair of cantilevered suspension arms. Suspension arms to
be of rust-resistant
1
4
" steel and to be securely guided by ball
bearing rollers. Total stacking height to edge of top frame to
be not less than 22".
Continue for
Door model specifications:
Unit to have hinged pan-type stainless steel door to facilitate
storage of empty racks. Door to match cabinet exterior and
provided with vertical finger grip and self-latching
mechanism.
** Height excludes flange & guide posts. Add 3
1
4
" for overall height.
*** Actual capacities vary with shape of object to be dispensed.
CM-1020
CM-1020-D
CM-1020-H
Model
25
3
8
"
Length
18
1
2
"
Width
34
1
4
"
Height
Unit to be provided with the following accessories:
Accessories
ACC-63 - 5" diameter swivel casters with polyurethane tires
in lieu of 4" diameter swivel casters. (Add 1
1
8
" to height)
ACC-41 - Caster brakes on two diagonal casters. (standard
on heated units)
ACC-50 - Perimeter bumpers with replaceable corner
bumpers. (Add 1
1
4
" to length and width)
ACC-52 - Vertical corner bumpers only. Easy to replace.
(Add 1
1
4
" to length and width)
All specifications subject to change without notice
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
CM-2020
CM-2020-D
CM-2020-H
70
Cups
95
Glasses
25
3
8
" 27
1
2
" 34
1
4
"140
CM-2620-10
CM-2620-D-10
CM-2620-H-10
27
1
2
" 35
1
2
" 34
1
4
"**140
Continue for
Saucer model specifications:
Self-leveling cylinders to be field adjustable without the use
of tools for china and plastic dishes without requiring prior
identification, irrespective of weight, height, or brand.
Calibrating mechanism to have multiple extension springs
peripherally suspended from a circular storage bank.
Selective engaging of springs with dish carrier assembly to
permit balancing and dispensing of any load within range of
model selected. Cylinders to have 18 gauge stainless steel
raised top flange, in high luster finish, with three 3" high
plastic guide posts equally spaced.
190
-----
-----
Bowls
96
-----
-----
Saucers
-----
140
(up to 5
3
4
" dia)
Capacities*** and Dimensions
CM-2620-20
CM-2620-D-20
CM-2620-H-20
27
1
2
" 35
1
2
" 34
1
4
"**140 ----- -----
140
(5
7
8
" to 7
1
4
" dia)
CM-2620-10
CM-2620-D-10*
CM-2620-H-10
CM-1020
CM-1020-D*
CM-1020-H
CM-2620-20
CM-2620-D-20*
CM-2620-H-20
CM-2020
CM-2020-D*
CM-2020-H
Self-Leveling Dispensers for
Cups, Saucers, Glasses, & Bowls
Heated and Unheated
* Denotes door model
Continue to page 2 of 2 for heated unit specifications.
R
08/08
page 1 of 2
PROJECT:
ITEM NO:
LOCATION:
All specifications subject to change without notice
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
Continue for
Heated model specifications:
Two diagonal casters to have foot brakes.
Electrical control box to be stainless steel and installed for
easy removal for service. Control box to be furnished with
on/off switch with integral pilot light with infinite Hi-Lo heat
control for temperature settings 1 through 9, and a recessed
male three-pronged NEMA twist-lock receptacle. Elements
to be stainless steel, tubular and of hi-intensity. Unit to be
supplied with a 6'-0" long cord with a NEMA twist-lock
female connector at one end and a three prong male plug at
the other end. Heating elements of stainless steel,
hi-intensity.
CM-1020-H
120
Model Volts Phase
Amps Plug
Outlet *
NEMA
208
240
7.9 5-15P
4.6
4.0
Electrical Data
1
1
1
6-15P
6-15P
5-15R
6-15R
6-15R
CM-1020-H
TOP VIEW
* Outlet not supplied by Caddy Corporation.
CM-2020-H
120
Model Volts Phase
Amps
Plug
Outlet *
NEMA
208
240
10.3 5-15P
6.0
5.2
Electrical Data
1
1
1
6-15P
6-15P
5-15R
6-15R
6-15R
* Outlet not supplied by Caddy Corporation.
CM-2620-H-10
CM-2620-H-20
120
Model Volts Phase
Amps
Plug
Outlet *
NEMA
208
240
10.3 5-15P
6.0
5.2
Electrical Data
1
1
1
6-15P
6-15P
5-15R
6-15R
6-15R
* Outlet not supplied by Caddy Corporation.
FRONT VIEW
TOP VIEW
CM-2020-H
FRONT VIEW
TOP VIEW FRONT VIEW
CM-2620-H-10
(SHOWN)
Self-Leveling Dispensers for
Cups, Saucers, Glasses, & Bowls
Heated and Unheated
R
Heated units only to be
R
08/08
page 2 of 2
PROJECT:
ITEM NO:
LOCATION:
Self-leveling Dispensers
Open Tubular Style for
Plates, Bowls, & Saucers (Unheated)
General Specifications
Caddymagic self-leveling dispenser to be Caddy
Corporation model CM-_______________.
Unit to have 16 gauge stainless steel reinforced top and 1"
O.D. 16 gauge stainless steel tubular frame of all welded
construction with stainless steel cross bracing on four sides.
Casters to be 4" diameter heavy-duty swivel type with
3
4
"
stems and polyurethane tires.
Self-leveling cylinders to be field adjustable without the use
of tools for china and plastic dishes without requiring prior
identification, irrespective of weight, height, or brand.
Calibrating mechanism to have multiple extension springs
peripherally suspended from a circular storage bank.
Selective engaging of springs with dish carrier assembly to
permit balancing and dispensing of any load within range of
model selected. Each cylinder to have a 20 gauge stainless
steel. enclosure and 18 gauge stainless steel raised top
flange, in high luster finish, with three 3" high plastic guide
posts equally spaced.
CM-T-102
to
CM-T-502
** Actual capacities vary with shape of object to be dispensed.
CM-T-102
CM-T-202
CM-T-302
CM-T-402
CM-T-502
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
26
3
4
"
Length
15
3
8
"
Width
37"
Height
32
1
2
"
17
1
8
"
36
1
4
" 19"
Two Dispenser Capacity up to 144 plates or 72 bowls **
CM-T-103
CM-T-203
CM-T-303
CM-T-403
CM-T-503
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
38
1
4
"
Length
15
3
8
"
Width
Height
17
1
8
"
19"
Three Dispenser Capacity up to 216 plates or 108 bowls **
46
7
8
"
52
1
2
"
CM-TQ-103
CM-TQ-203
CM-TQ-303
CM-TQ-403
CM-TQ-503
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
26
3
4
"
Length
Width
Height
Three Dispenser Capacity up to 216 plates or 108 bowls **
25
3
4
"
32
1
2
" 31
1
2
"
35
1
4
"36
1
4
"
CM-T-104
CM-T-204
CM-T-304
CM-T-404
CM-T-504
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
Length
Width
Height
Four Dispenser Capacity up to 288 plates or 144 bowls **
CM-T-103
to
CM-T-503
CM-TQ-103
to
CM-TQ-503
CM-T-104
to
CM-T-504
Unit to be provided with the following accessories:
Accessories
ACC-63 - 5" diameter swivel casters with polyurethane
tires in lieu of 4" diameter swivel casters. (Add 1
1
8
" to
height)
ACC-41 - Caster brakes on two diagonal casters.
ACC-38 - Circular bumpers. (Add 4" to length and width)
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
26
3
4
" 15
3
8
"
32
1
2
"
17
1
8
"
38
1
4
" 15
3
8
"
17
1
8
"
46
7
8
"
26
3
4
" 25
3
4
"
32
1
2
" 31
1
2
"
26
3
4
" 25
3
4
"
32
1
2
" 31
1
2
"
35
1
4
"36
1
4
"
26
3
4
" 25
3
4
"
32
1
2
" 31
1
2
"
All specifications subject to change without notice
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
page 1 of 1
PROJECT:
ITEM NO:
LOCATION:
Self-leveling Dispensers
Open Tubular Style for
Plates, Bowls, & Saucers (Heated)
General Specifications
Caddymagic self-leveling dispenser to be Caddy
Corporation model CM-_______________.
Unit to have 16 gauge stainless steel reinforced top and 1"
O.D. 16 gauge stainless steel tubular frame of all welded
construction with stainless steel cross bracing on four sides.
Casters to be 4" diameter heavy-duty swivel type with
3
4
"
stems and polyurethane tires.
Casters on diagonal corners
to be provided with foot brakes.
Self-leveling cylinders to be field adjustable without the use
of tools for china and plastic dishes without requiring prior
identification, irrespective of weight, height, or brand.
Calibrating mechanism to have multiple extension springs
peripherally suspended from a circular storage bank.
Selective engaging of springs with dish carrier assembly to
permit balancing and dispensing of any load within range of
model selected. Each cylinder to have a 20 gauge stainless
steel enclosure and 18 gauge stainless steel raised top
flange, in high luster finish, with three 3" high plastic guide
posts equally spaced.
CM-T-102-H
to
CM-T-502-H
** Actual capacities vary with shape of object to be dispensed.
CM-T-102-H
CM-T-202-H
CM-T-302-H
CM-T-402-H
CM-T-502-H
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
26
3
4
"
Length
15
3
8
"
Width
37"
Height
32
1
2
" 17
1
8
"
36
1
4
" 19"
Two Dispenser Capacity up to 144 plates or 72 bowls **
CM-T-103-H
CM-T-203-H
CM-T-303-H
CM-T-403-H
CM-T-503-H
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
38
1
4
"
Length
15
3
8
"
Width
Height
17
1
8
"
19"
Three Dispenser Capacity up to 216 plates or 108 bowls **
46
7
8
"
52
1
2
"
CM-TQ-103-H
CM-TQ-203-H
CM-TQ-303-H
CM-TQ-403-H
CM-TQ-503-H
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
26
3
4
"
Length
Width
Height
Three Dispenser Capacity up to 216 plates or 108 bowls **
25
3
4
"
32
1
2
" 31
1
2
"
35
1
4
"36
1
4
"
CM-T-104-H
CM-T-204-H
CM-T-304-H
CM-T-404-H
CM-T-504-H
up to 5
3
4
"
5
7
8
" to 7
1
4
"
7
3
8
" to 9
1
2
"
9
5
8
" to 10
1
8
"
10
1
4
" to 12"
Model Dish/Bowl Dia.
Length
Width
Height
Four Dispenser Capacity up to 288 plates or 144 bowls **
CM-T-103-H
to
CM-T-503-H
CM-TQ-103-H
to
CM-TQ-503-H
CM-T-104-H
to
CM-T-504-H
Unit to be provided with the following accessories:
Accessories
ACC-63 - 5" diameter swivel casters with polyurethane
tires in lieu of 4" diameter swivel casters. (Add 1
1
8
" to
height)
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
37"
26
3
4
" 15
3
8
"
32
1
2
" 17
1
8
"
38
1
4
" 15
3
8
"
17
1
8
"
46
7
8
"
26
3
4
" 25
3
4
"
32
1
2
" 31
1
2
"
26
3
4
" 25
3
4
"
32
1
2
" 31
1
2
"
35
1
4
"36
1
4
"
26
3
4
" 25
3
4
"
32
1
2
" 31
1
2
"
R
All specifications subject to change without notice
ACC-38 - Circular bumpers. (Add 4" to length and width)
ACC-56 - Lexan (polycarbonate) covers
Electrical components to consist of top mounted on/off
switch, pilot light and knob adjustable thermostat.
Thermostat to be bi-metallic, adjustable, cycling type to
maintain selected level of temperature with minimum
fluctuations. Heating elements to be tubular, stainless steel
sheathed, hi-intensity, loop type. A junction box with
recessed receptacles for plugging in each dispenser to be
provided and fitted with rubber-jacketed drop cord and three
prong male plug with stainless steel hook. Unit to be wired
for 120 volts, A.C., single phase.
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
page 1 of 2
PROJECT:
ITEM NO:
LOCATION:
CM-T-202-H
CM-T-302-H
CM-T-402-H
120
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
120
8.3 1000 5-15P
10.8
Electrical Data
1
1 1300 5-15P
5-15R
5-15R
CM-T-102-H
to
CM-T-502-H
CM-T-103-H
to
CM-T-503-H
CM-TQ-103-H
to
CM-TQ-503-H
CM-T-104-H
to
CM-T-504-H
* Outlet not supplied by Caddy Corporation.
R
All specifications subject to change without notice
Self-leveling Dispensers
Open Tubular Style for
Plates, Bowls, & Saucers (Heated)
120 5.8 700 5-15P1 5-15RCM-T-102-H
CM-T-502-H
CM-T-203-H
CM-T-303-H
CM-T-403-H
120
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
120
12.5 1500 5-15P
16.3
Electrical Data
1
1 1950 5-20P
5-15R
5-20R
120 8.8 1050 5-15P1 5-15RCM-T-103-H
CM-T-503-H
TOP VIEW FRONT VIEW
* Outlet not supplied by Caddy Corporation.
* Outlet not supplied by Caddy Corporation.
CM-TQ-203-H
CM-TQ-303-H
CM-TQ-403-H
120
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
120
12.5 1500 5-15P
16.3
Electrical Data
1
1 1950 5-20P
5-15R
5-20R
120 8.8 1050 5-15P1 5-15R
CM-TQ-103-H
CM-TQ-503-H
* Outlet not supplied by Caddy Corporation.
CM-T-204-H
CM-T-304-H
CM-T-404-H
120
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
120
16.6 2000 5-20P
21.6
Electrical Data
1
1 2600 5-30P
5-20R
5-30R
120 11.6 1400 5-15P1 5-15RCM-T-104-H
CM-T-504-H
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
page 2 of 2
PROJECT:
ITEM NO:
LOCATION:
General Specifications
Caddymagic Super Heat self-leveling dispenser to be Caddy
Corporation model CM-_______________.
Unit to have 16 gauge stainless steel top with 2" turned
down channel edge on 4 sides and welded finished corners.
Exterior of cabinet to be finished in stainless steel.
Self-leveling cylinders to be field adjustable without the use
of tools for china without requiring prior identification,
irrespective of weight, height, or brand. Calibrating
mechanism to have multiple extension springs peripherally
suspended from a circular storage bank. Selective engaging
of springs with dish carrier assembly to permit balancing and
dispensing of any load within range of model selected.
Cylinders to have 18 gauge stainless steel raised top flange,
in high luster finish.
Each dispenser to be enclosed in full height 1" thick
insulation and to have an aluminum dome cover with two
finger holes. Dispenser flange to be isolated from cabinet
top by a thermal breaker, preventing metal contact between
dispenser and cabinet.
CM-S-302-SH
* Actual capacities vary with shape of object to be dispensed.
** Height excludes dome covers. Add 4
3
4
" to overall height for dome covers.
CM-S-302-SH
CM-S-303-SH
CM-SQ-303-SH
CM-S-304-SH
Up to 9
1
2
" (144*)
Model
Plate Dia. (qty)
29
1
4
"
Length
16"
Width
35
1
4
" **
Height
44" 16"
29
1
4
" 29
1
4
"
29
1
4
"
Bottom of cabinet to be 12 gauge stainless steel, rust
resistant metal and body to have full height vertical plastic
corner bumpers. Casters are to be 5" diameter swivel type
with polyurethane tires. Casters on diagonal corners to be
provided with foot brakes.
Unit to have timer wired to hi-intensity sheathed heating
elements of a minimum 620 watts. Electrical control box to
be stainless steel and installed for easy removal for service.
Control box to be furnished with a timer to be adjustable to
reach maximum temperature within 2 hours and a recessed
male three-pronged NEMA twist-lock receptacle. Unit to be
supplied with a 6'-0" long cord with a NEMA twist-lock
female connector at one end and a three prong male plug at
the other end.
Unit to be provided with the following accessories:
Accessories
ACC-50 - Perimeter bumpers with replaceable corner
bumpers. (Add 1
1
4
" to length and width)
ACC-52 - Vertical corner bumpers only. Easy to replace.
(Add 1
1
4
" to length and width)
ACC-54*** - China Plate Lifter will not mar china.
R
All specifications subject to change without notice
Self-leveling Dispensers
"The Super Heater"
for 9" China Plates
Up to 9
1
2
" (216*)
Up to 9
1
2
" (216*)
Up to 9
1
2
" (288*)
29
1
4
"
35
1
4
" **
35
1
4
" **
35
1
4
" **
'LVSHQVHVVXSHUKHDWHG))GLVKHVLQKRXUVWRNHHSIRRGWHPSHUDWXUHVDWGHVLUHG
serving levels! Highly efficient with pelletized or plate-underliners systems.
Not recommended for plastic dishes
Dimensions
Dietitians and patients demand that hot foods be served hot
at bedside. The primary protection against loss of food heat
is the plate itself. Caddy has developed this super heating
self-leveling plate dispenser. It is safe with all china.
It is no longer necessary to accept inferior dispensers that
GHOLYHUSODWHVDW))1RZ\RXFDQUHO\RQWKH
Super Heater .
Super heated plates hold higher food temperatures
efficiently with either pelletized or space age plate
underliners
CM-S-303-SH
CM-SQ-303-SH
CM-S-304-SH
*** Each unit equipped with one ACC-54. Mark only if extra are required.
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
page 1 of 2
PROJECT:
ITEM NO:
LOCATION:
* Outlet not supplied by Caddy Corporation.
CM-S-302-SH
120
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
208
240
10.3 1240 5-15P
6.0
5.2
Electrical Data
1
1
1
1240
1240
6-15P
6-15P
5-15R
6-15R
6-15R
CM-S-303-SH
120
208
15.5 1860 5-20P
8.9
1
1 1860 6-15P
5-20R
6-15R
CM-SQ-303-SH
208 8.91 1860 6-15P 6-15R
120 15.5 1860 5-20P1 5-20R
CM-S-304-SH
208
240
11.9
10.3
1
1
2480
2480
6-15P
6-15P
6-15R
6-15R
120 20.7 2480 5-30P15-30R
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMAElectrical Data
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMAElectrical Data
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
Electrical Data
CM-S-302-SH
TOP VIEW FRONT VIEW
* Outlet not supplied by Caddy Corporation.
R
All specifications subject to change without notice
Self-leveling Dispensers
"The Super Heater"
for 9" China Plates
CM-S-303-SH
CM-SQ-303-SH
CM-S-304-SH
* Outlet not supplied by Caddy Corporation.
* Outlet not supplied by Caddy Corporation.
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
page 2 of 2
PROJECT:
ITEM NO:
LOCATION:
General Specifications
Caddymagic Hi-Heat self-leveling dispenser to be Caddy
Corporation
model
CM-_______________.
Unit to have 16 gauge stainless steel top with 2" turned
down channel edge on 4 sides and welded finished corners.
Exterior of cabinet to be finished in stainless steel.
Self-leveling cylinders to be field adjustable without the use
of tools for stainless steal underliners and bases without
requiring prior identification, irrespective of weight, height, or
brand. Calibrating mechanism to have multiple extension
springs peripherally suspended from a circular storage bank.
Selective engaging of springs with carrier assembly to
permit balancing and dispensing of any load within range of
model selected. Cylinders to have 18 gauge stainless steel
raised top flange, in high luster finish.
Each dispenser to be enclosed in full height 1" thick
insulation and to have an aluminum dome cover with knob.
Dispenser flange to be isolated from cabinet top by a
thermal breaker, preventing metal contact between
dispenser and cabinet.
CM-S-302-HH
CM-S-402-HH
* Actual capacities vary with shape of object to be dispensed.
** Height excludes dome covers. Add 5
1
2
" to overall height for dome covers.
CM-S-302-HH
CM-S-303-HH
CM-SQ-303-HH
CM-S-304-HH
Up to 9
1
2
" (72*
)
Model
Base Dia. (qty)
29
1
4
"
Length
16"
Width
35
1
4
" **
Height
44" 16"
29
1
4
" 29
1
4
"
29
1
4
"
Bottom of cabinet to be 12 gauge stainless steel, rust
resistant metal and body to have full height vertical plastic
corner bumpers. Casters are to be 5" diameter swivel type
with polyurethane tires. Casters on diagonal corners to be
provided with foot brakes.
Each cylinder to have individual Hi-Limit thermostat and
timer wired to hi-intensity sheathed heating elements of a
minimum of 950 watts. Electrical control box to be stainless
steel and installed for easy removal for service. Control box
to be furnished with a timer to be adjustable to reach
maximum temperature within 120 minutes and a recessed
male three-pronged NEMA twist-lock receptacle. Unit to be
supplied with a 6'-0" long cord with a NEMA twist-lock
female connector at one end and a three prong male plug at
the other end.
Unit to be provided with the following accessories:
Accessories
ACC-50 - Perimeter bumpers with replaceable corner
bumpers. (Add 1
1
4
" to length and width)
ACC-52 - Vertical corner bumpers only. Easy to replace.
(Add 1
1
4
" to length and width)
ACC-53 - Vacuum Lifter for underliners.
R
All specifications subject to change without notice
Self-leveling Dispensers
"Hi-Heat"
for Stainless Steel Underliners & Bases
Up to 9
1
2
" (108*)
Up to 9
1
2
" (108*)
Up to 9
1
2
" (144*)
29
1
4
"
35
1
4
" **
35
1
4
" **
35
1
4
" **
:LOOKHDWWR)LQPLQXWHVDQG)LQKRXUV+LJKO\HIILFLHQWZLWK7KHUPD/RFN
hospital tray service model TL-95 and all other makes
Specify the make of underliner or base to be used.
Dimensions
Caddy base heaters are designed to heat
Caddy TL-95 underliners. Underliners
manufactured by others should be sent to
factory to be tested for proper operation.
CM-S-303-HH
CM-S-403-HH
CM-SQ-303-HH
CM-S-304-HH
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
CM-S-402-HH 29
1
4
" 16" 35
1
4
" **
CM-S-403-HH 44" 16" 35
1
4
" **
9
5
8
" to 10
1
8
" (72*)
9
5
8
" to 10
1
8
" (108*)
page 1 of 2
PROJECT:
ITEM NO:
LOCATION:
CADDY Food Service Systems
* Outlet not supplied by Caddy Corporation.
CM-S-302-HH
CM-S-402-HH
120
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
208
240
15.8 1900 5-20P
9.1
7.9
Electrical Data
1
1
1
1900
1900
6-20P
6-20P
5-20R
6-20R
6-20R
CM-S-304-HH
208 17.313800 6-30P 6-30R
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
Electrical Data
CM-S-302-HH
CM-S-402-HH
TOP VIEW FRONT VIEW
* Outlet not supplied by Caddy Corporation.
R
All specifications subject to change without notice
CM-S-303-HH
CM-S-403-HH
HCM-SQ-303-SH
CM-S-304-HH
CM-S-303-HH
CM-S-403-HH
120
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
208
240
23.8 2850 5-30P
13.7
11.8
Electrical Data
1
1
1
2850
2850
6-20P
6-20P
5-30R
6-20R
6-20R
* Outlet not supplied by Caddy Corporation.
208 9.13 2850 15-20P 15-20R
240 7.93 2850 15-20P 15-20R
CM-SQ-303-HH
120
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
208
240
23.8 2850 5-30P
13.7
11.8
Electrical Data
1
1
1
2850
2850
6-20P
6-20P
5-30R
6-20R
6-20R
* Outlet not supplied by Caddy Corporation.
208 9.13 2850 15-20P 15-20R
240 7.93 2850 15-20P 15-20R
Self-leveling Dispensers
"Hi-Heat"
for Stainless Steel Underliners & Bases
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
page 2 of 2
PROJECT:
ITEM NO:
LOCATION:
General Specifications
Caddymagic Combo Heater self-leveling dispenser to be
Caddy Corporation model CM-_______________.
Unit to have 16 gauge stainless steel top with 2" turned
down channel edge on 4 sides and welded finished corners.
Exterior of cabinet to be finished in stainless steel.
Self-leveling cylinders to be field adjustable without the use
of tools for china dishes and pellet underliners without
requiring prior identification, irrespective of weight, height, or
brand. Calibrating mechanism to have multiple extension
springs peripherally suspended from a circular storage bank.
Selective engaging of springs with dish carrier assembly to
permit balancing and dispensing of any load within range of
model selected. Cylinders to have 18 gauge stainless steel
raised top flange, in high luster finish.
Each dispenser to be enclosed in full height 1" thick
insulation and to have an aluminum dome cover with knob.
Dispenser flange to be isolated from cabinet top by a
thermal breaker, preventing metal contact between
dispenser and cabinet.
Bottom of cabinet to be 12 gauge stainless steel, rust
resistant metal and body to have full height vertical plastic
corner bumpers. Casters are to be 5" diameter swivel type
with polyurethane tires. Casters on diagonal corners to be
provided with foot brakes.
CM-S-302-SHC
1 PELLET HEATER
1 PLATE HEATER
** Actual capacities vary with shape of object to be dispensed.
*** Height excludes dome covers. Add 5
1
2
" to overall height for dome covers.
CM-S-302-SHC
CM-S-304-SHC
Up to 9
1
2
" (72*
)
Model
Base Dia. (qty)
29
1
4
"
Length
16"
Width
35
1
4
" ***
Height
Each pellet cylinder to have individual clickstat and timer
wired to hi-intensity sheathed heating elements of a
minimum of 950 watts. Each plate cylinder to have
individual clickstat and timer wired to hi-intensity sheathed
heating elements of a minimum 620 watts. Electrical control
box to be stainless steel and installed for easy removal for
service. Control box to be furnished with a timer to be
adjustable to reach maximum temperature within 2 hours
and a recessed male three-pronged NEMA twist-lock
receptacle. Unit to be supplied with a 6'-0" long cord with a
NEMA twist-lock female connector at one end and a three
prong male plug at the other end.
Unit to be provided with the following accessories:
Accessories
ACC-50 - Perimeter bumpers with replaceable corner
bumpers. (Add 1
1
4
" to length and width)
ACC-52 - Vertical corner bumpers only. Easy to replace.
(Add 1
1
4
" to length and width)
ACC-53 - Vacuum Lifter for pellet underliners.
R
All specifications subject to change without notice
Self-leveling Dispensers
Combo Heater
Super Heat Plates & Hi-Heat Pellets
Up to 9
1
2
" (108*)
35
1
4
" ***
Dimensions
29
1
4
" 29
1
4
"
ACC-54 - China Plate Lifter will not mar china.
CM-S-302-SHC
120
Model Volts Phase
Amps
Watts
Plug
Outlet *
NEMA
208
240
13.1
620
5-20P
7.5
13.1
Electrical Data
1
1
1
6-20P
6-20P
5-20R
6-15R
6-20R
* Outlet not supplied by Caddy Corporation.
CM-S-304-SHC
208 15.11 6-20P 6-20R
950
620
950
TOP VIEW
TOP VIEW
FRONT VIEW FRONT VIEW
1240
1900
1240
1900
CM-S-304-SHC
2 PELLET HEATER
2 PLATE HEATER
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
Unit to include (1) ACC-54 China Plate Lifter.
08/08
page 1 of 1
PROJECT:
ITEM NO:
LOCATION:
CM-S-132
** Height excludes flange & guide posts.
Add 3
1
4
" for overall height.
CM-S-132
CM-S-132-H
CM-S-133
CM-S-133-H
Model
35
1
4
"
Length
16"
Width
34" **
Height
35
1
4
" 16"
49
1
2
" 16
1
2
"
29
1
4
"
Continue for
Heated model specifications:
Electrical control box to be stainless steel and installed for
easy removal for service. Control box to be furnished with
on/off switch, pilot light with infinite Hi-Lo heat control for
temperature settings 1 through 9, and a recessed male
three-pronged NEMA twist-lock receptacle. Unit to be
supplied with a 6'-0" long cord with a NEMA twist-lock
female connector at one end and a three prong male plug at
the other end. Heating elements of stainless steel,
hi-intensity.
Heated units only to be
Unit to be provided with the following accessories:
Accessories
ACC-50 - Perimeter bumpers with replaceable corner
bumpers. (Add 1
1
4
" to length and width)
ACC-52 - Vertical corner bumpers only. Easy to replace.
(Add 1
1
4
" to length and width)
R
All specifications subject to change without notice
29
1
4
"
34" **
34" **
34" **
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
Self-Leveling Dispensers for
Oval Platters (Heated and Unheated)
Cabinet and Drop-In
General Specifications
Caddymagic self-leveling dispenser to be Caddy
Corporation
model
CM-_______________.
Unit to have heavy gauge aluminum carrying platform with
ball bearing rollers for stable guidance in vertical stainless
steel tracks.
Carrying platform to have four 3" high plastic
guide posts equally spaced. Pan type bottom to be welded
to four stainless steel uprights with 16 guage stainless steel
flanged top frame to provide one rigid assembly.
Self-leveling dispenser to be field adjustable without the use
of tools for stainless steal underliners and bases without
requiring prior identification, irrespective of weight, height, or
brand. Calibrating mechanism to have multiple extension
springs peripherally suspended from two corresponging
sides of top frame. Selective engaging of springs with
carrier assembly to permit balancing and dispensing of any
load from 20 to 180 pounds.
Continue for
Cabinet model specifications:
Unit to have 16 gauge stainless steel top with 2" turned
down channel edge on 4 sides and welded finished corners.
Exterior of cabinet to be stainless steel. Cabinet corners to
be reinforced with 16 gauge stainless steel channels and to
have full height extruded plastic vertical bumpers.
Bottom of cabinet to be 12 gauge stainless steel, rust
resistant metal and to have 2
1
2
" diameter center clean-out
hole with a removable plug. Unit to be mounted on four 4"
diameter swivel type casters with polyurethane tires***.
CM-D-1013 17
3
4
" 15
1
2
" 28" **
ACC-63 - 5" diameter swivel casters with polyurethane
tires in lieu of 4" diameter swivel casters. (Add 1
1
8
" to
height)
ACC-41 - Caster brakes on two diagonal casters.
CM-D-1013
Countertop
Cutout
Flange
Outside
15
3
4
" X 13"
1
1
2
"
CM-S-132-H
CM-S-133-H
120
Model Volts Phase
Amps
Plug
Outlet *
NEMA
208
240
7.9 5-15P
4.6
4.0
Electrical Data
1
1
1
6-15P
6-15P
5-15R
6-15R
6-15R
* Outlet not supplied by Caddy Corporation.
CM-S-133
CM-D-1013
Units dispense oval platters up to
10
1
2
" wide x 13" long
CM-S-132-H CM-S-133-H
R
Drop-In Style
Cabinet Style
*** Heated units to be provided with foot brakes on two diagonal casters.
page 1 of 1
PROJECT:
ITEM NO:
LOCATION:
General Specifications
Caddymagic self-leveling dispenser to be Caddy
Corporation model CM-_______________.
Self-leveling mechanism to be cantilevered suspension type.
Removable panel to be provided in the 18 gauge stainless
steel upright enclosed mechanism housing, to permit easy
calibration without the use of tools, for full load factors from
20 to 182 pounds and without prior identification of wares,
irrespective of weight, height, or brand. Mechanism to be
free of cables, chains, pulleys, sprockets, gears, levers,
crank handles or components requiring periodic
maintenance and lubrication.
Removable load platform to be 18 gauge stainless steel and
secured to 16 gauge stainless steel angle support frame and
a pair of cantilevered suspension arms. Suspension arms to
be of rust-resistant
1
4
" steel and to be securely guided by ball
bearing rollers. Total stacking height to top of housing to be
not less than 22".
The lower rack storage platform to be formed of 16 gauge
stainless steel, channeled down on all four sides with two
stainless steel reinforce members underneath. Unit to be
mounted on four 4" diameter swivel type casters with
polyurethane tires.
* Height excludes flange & guide posts. Add 3
1
4
" for overall height.
** Actual capacities vary with shape of object to be dispensed.
CM-1020-C
Model
23
1
2
"
Length
19
5
8
"
Width
35
1
2
"
Height
Unit to be provided with the following accessories:
Accessories
ACC-63 - 5" diameter swivel casters with polyurethane tires
in lieu of 4" diameter swivel casters. (Add 1
1
8
" to height)
ACC-41 - Caster brakes on two diagonal casters.
ACC-50 - Perimeter bumpers with replaceable corner
bumpers. (Add 1
1
4
" to length and width)
ACC-52 - Vertical corner bumpers only. Easy to replace.
(Add 1
1
4
" to length and width)
All specifications subject to change without notice
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
70
Cups
95
Glasses
Continue for
Saucer model specifications:
Self-leveling cylinders to be field adjustable without the use
of tools for china and plastic saucers without requiring prior
identification, irrespective of weight, height, or brand.
Calibrating mechanism to have multiple extension springs
peripherally suspended from a circular storage bank.
Selective engaging of springs with dish carrier assembly to
permit balancing and dispensing of any load within range of
model selected. Cylinders to have 18 gauge stainless steel
raised top flange, in high luster finish, with three 3" high
plastic guide posts equally spaced.
72
Bowls
-----
Saucers
Capacities** and Dimensions
CM-2020-C 23
1
2
" 29
5
8
"140 190 144 -----
CM-2620-C-20
CM-2620-C-10 23
1
2
" 36
1
4
"140 ----- ----- 140
CM-2620-C-20 23
1
2
" 36
1
4
"140 ----- ----- 140
CM-2720-C-10 23
1
2
" 46
3
4
"140 ----- ----- 210
CM-2720-C-20 23
1
2
" 46
3
4
"140 ----- ----- 210
35
1
2
"
35
1
2
"*
35
1
2
"*
35
1
2
"*
35
1
2
"*
CM-2720-C-20
CM-2620-C-10
CM-2720-C-10
CM-1020-C
CM-2020-C
CM-1020-C
(Side view)
CM-2620-C-10
(Side view)
-10 models hold
up to 5
3
4
" dia. plates
-20 models hold
5
7
8
to 7
1
4
" dia. plates
Self-Leveling Dispensers for
Cups, Saucers, Glasses, & Bowls
Cantilever style
08/08
page 1 of 1
PROJECT:
ITEM NO:
LOCATION:
CM-1418
Model
25
3
8
"
Length
21
1
2
"
Width
34
1
4
"
Height
Unit to be provided with the following accessories:
Accessories
ACC-63 - 5" diameter swivel casters with polyurethane tires
in lieu of 4" diameter swivel casters. (Add 1
1
8
" to height)
ACC-41 - Caster brakes on two diagonal casters.
ACC-50 - Perimeter bumpers with replaceable corner
bumpers. (Add 1
1
4
" to length and width)
ACC-52 - Vertical corner bumpers only. Easy to replace.
(Add 1
1
4
" to length and width)
All specifications subject to change without notice
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
Dimensions
CM-1622 27" 23
1
2
"
CM-1814-C 16
1
2
" 31
3
4
"
CM-2015-C
CM-2216-C
CM-1418-C
23
1
2
" 23
3
4
"
35
1
2
"
CM-1418
CM-1622
TOP VIEW
Self-Leveling Dispensers for
Trays
Cabinet or Cantilever Style
CM-1520-C
CM-1622-C
General Specifications
Caddymagic self-leveling dispenser to be Caddy
Corporation model CM-_______________.
Self-leveling mechanism to be cantilevered suspension type.
Removable panel to be provided to permit easy calibration
without the use of tools, for full load factors from 20 to 182
pounds and without prior identification of wares, irrespective
of weight, height, or brand. Mechanism to be free of cables,
chains, pulleys, sprockets, gears, levers, crank handles or
components requiring periodic maintenance and lubrication.
Removable load platform to be 18 gauge stainless steel and
secured to 16 gauge stainless steel angle support frame and
a pair of cantilevered suspension arms. Suspension arms to
be of rust-resistant
1
4
" steel and to be securely guided by ball
bearing rollers. Total stacking height to edge of top frame to
be not less than 22".
Continue for:
Cabinet Models Specifications:
Unit to have 16 gauge stainless steel top with 2" turned
down channel edge on 4 sides and welded finished corners.
Exterior of cabinet to be stainless steel. Cabinet corners to
be reinforced with 16 gauge stainless steel channels and to
have full height extruded plastic vertical bumpers.
Bottom of cabinet to be 12 gauge stainless steel, rust
resistant metal and to have 2
1
2
" diameter center clean-out
hole with a removable plug. Unit to be mounted on four 4"
diameter swivel type casters with polyurethane tires.
ACC-51 - Guides for automatic tray stacking.
RIGHT SIDE
VIEW
TOP VIEW
RIGHT SIDE
VIEW
CM-1814-C
CM-2015-C
CM-2216-C
CM-1814-2C
CM-1418-C
CM-1520-C
CM-1622-C
Continue for:
Cantilever models Specifications:
The lower rack storage platform to be formed of 16 gauge
stainless steel, channeled down on all four sides with two
stainless steel reinforce members underneath. Unit to be
mounted on four 4" diameter swivel type casters with
polyurethane tires.
34
1
4
"
16
1
2
"
16
1
2
"
31
3
4
"
31
3
4
"
35
1
2
"
35
1
2
"
35
1
2
"
35
1
2
"
35
1
2
"
23
1
2
"
23
1
2
"
23
3
4
"
24
3
4
"
Capacity: 75 trays*
(Actual capacities vary with shape of tray to be dispensed.)
14" x 18"
Trays
14" x 18"
14" x 18"
16" x 22"
16" x 22"
16" x 22"
15" x 20"
15" x 20"
08/08
CM-1814-2C
35
1
2
"34
1
4
"
24
3
4
"
14" x 18"
TOP VIEW
RIGHT SIDE
VIEW
* CM-1814-2C capacity: 150 trays
CM-1814-2C
page 1 of 1
PROJECT:
ITEM NO:
LOCATION:
All specifications subject to change without notice
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
CM-1418-CS
TOP VIEW
Self-Leveling Dispensers for
Trays & Silver
Cabinet or Cantilever Style
FRONT VIEW
TOP VIEW
SIDE VIEW
TOP VIEW
08/08
FRONT VIEW FRONT VIEW
CM-1814-CS CM-1814-2CS
SIDE VIEW SIDE VIEW
CM-1814-2CSL
TOP VIEW
FRONT VIEW
TOP VIEW
SIDE VIEW
TOP VIEW
FRONT VIEW FRONT VIEW
CM-1418-S CM-1622-S
SIDE VIEW SIDE VIEW
page 2 of 2
Length
Width
Length
Width
HeightHeight
PROJECT:
ITEM NO:
LOCATION:
* Capacities vary with shape of dishware to be dispensed
All specifications subject to change without notice
CADDY Food Service Systems
509 Sharptown Road P.O. Box 345
Bridgeport, NJ 08014-0345
Tel: 856-467-4222 Fax: 856-467-5511
internet: www.caddycorp.com
CADDY CORPORATION
08/08
General Specifications
Caddymagic self-leveling dispenser to be Caddy
Corporation
model
CM-D-_______________.
Unit to have heavy gauge aluminum carrying platform with
ball bearing rollers for stable guidance in vertical stainless
steel tracks. Pan type bottom to be welded to four stainless
steel uprights with 16 guage stainless steel flanged top
frame to provide one rigid assembly.
Self-leveling dispenser to be field adjustable without the use
of tools and without requiring prior identification, irrespective
of weight, height, or brand. Calibrating mechanism to have
multiple extension springs peripherally suspended from two
corresponging sides of top frame. Selective engaging of
springs with carrier assembly to permit balancing and
dispensing of any load from 20 to 180 pounds.
CM-D-1020
(for 10" x 20' racks)
CM-D-2020
(for 20" x 20" racks)
CM-D-1020
CM-D-2020
Model
Cups
Glasses Bowls
96
70
---
95
190140
Self-leveling Dispensers
Drop-In Style for
Cups, Glasses, & Bowls
Capacity*
Countertop
Cutout
(Width)
12
1
4
"
22"
Countertop
Cutout
(Legnth)
22
1
4
"
22"
Flange
(Width)
14
3
4
"
Flange
(Legnth)
24
1
2
"
24
1
2
" 24
1
2
"
Overall
(Height)
28"
28"
Chassis may overlap the counter top. Suitable method for
insallation in wood fixtures or stainless steel counter tops.
DROP-IN SERIES / PLATFORM STYLE
page 1 of 1
Loading...